Active power sharing and frequency regulation in inverter-based islanded microgrids subject to clock drifts, damage in power links and loss of communications

Tesi en modalitat de compendi de publicacions; hi ha diferents seccions retallades per drets de l'editorMicrogrids (MGs) are small-scale power systems containing storage elements, loads and distributed generators that are interfaced with the electric network via power electronic inverters. When an MG is in islanded mode, its dynamics are no longer dominated by the main grid. Then, inverters, driven by digital processors that may exchange data over digital communication, must act as voltage source inverters (VSIs) to take coordinated actions to ensure power quality and supply. The scope of this thesis is bounded to control strategies for active power sharing and frequency regulation in islanded MGs. The focus is on the analysis of prototype control policies when operating conditions are no longer ideal. In particular, the thesis covers the effect that a) clock drifts of digital processors, b) damage in power transmission lines, and c) failures in digital communications have in control performance. The work is submitted as a compendium of publications, including journal and international conference papers, where two main areas of research can be distinguished. The first area refers to the analysis of the effect that clock drifts have on frequency regulation and active power sharing. VSIs digital processors are equipped with oscillators, which run at not necessarily identical frequencies. As consequence, the local clocks in the physically distributed VSIs may differ. This part, reported in two conference papers and one journal paper, investigates state-of-the-art control policies when clocks of the computational devices drift. The contributions related to this part are a) the reformulation of existing control policies in terms of clock drifts, b) the steady-state analysis of these policies that offers analytical expressions to quantify the impact that drifts have on frequency and active power equilibrium points, c) the closed-loop model capable of accommodating all the policies, d) the stability analysis of the equilibrium points, and e) the experimental results. The second area copes with the analysis of the effect that electrical and communication failures have on frequency regulation and active power sharing. This investigation focuses on distributed/cooperative control policies where each inverter control action is computed using both local measures and data received from other inverters within the MG. This part, reported in one conference paper and two journal papers, investigates two control policies when the considered failures in terms of damage in power links and/or loss of communication between inverters provoke partitions within the MG. The contributions related to this part are a) the formulation of the MG as two connected graphs corresponding to the electrical and communication networks where both type of failures lead to disconnected electrical/communication sub-graphs, named partitions, that co-exist within the MG, b) the closed-loop model integrating the two graph Laplacian matrices, c) the stability analysis that identifies which type of partitions may lead to MG instability, d) the steady-state analysis that indicates how to compute the equilibrium points for the case of stable dynamics, e) a new control strategy based on switched control principles that permits avoiding the instability scenario, and f) the experimental results. For the purpose of verifying the operational performance of the analytical results, diverse experiments on a laboratory MG have been performed. The outcomes obtained are discussed and analyzed in terms of the objectives sought. Finally, conclusions and future research lines complete the thesis.Las microredes (MG) son sistemas de energía a pequeña escala que contienen elementos de almacenamiento, cargas y generadores distribuidos que están conectados con la red eléctrica a través de inversores de potencia. Cuando una MG está en modo aislado, su dinámica no está dominada por la red principal. Así, los inversores, comandados por procesadores digitales que pueden intercambiar información a través de comunicaciones digitales, deben actuar como fuentes de voltaje para ejecutar acciones coordinadas que garanticen el suministro de energía. Esta tesis se enmarca dentro de estrategias de control de última generación para compartir potencia activa y regular frecuencia en MG aisladas basadas en inversores. Su enfoque se centra en analizar estas políticas cuando las condiciones de operación no son ideales. En particular, la tesis cubre el efecto que a) desviaciones del reloj de los procesadores digitales, b) daños en las líneas de transmisión de energía, y c) fallas en las comunicaciones digitales, provocan en el rendimiento de control. El trabajo se presenta como un compendio que incluye publicaciones de revistas y de conferencias internacionales, donde se pueden distinguir dos temas principales de investigación. El primer tema comprende el análisis del efecto que tienen las desviaciones de reloj sobre la regulación de frecuencia y la compartición de potencia activa. Los procesadores de los inversores están equipados con osciladores que funcionan a frecuencias no necesariamente idénticas. Como consecuencia, los relojes locales en los inversores distribuidos físicamente, pueden diferir. Esta parte, descrita a través de dos artículos de conferencia y uno de revista, analiza el comportamiento de las políticas de control cuando los relojes de los dispositivos computacionales se desvían. Las contribuciones relacionadas con este tema son a) reformulación de las políticas de control de última generación en términos de desviaciones de reloj, b) análisis de estado estacionario de estas estrategias que ofrece expresiones analíticas para cuantificar el impacto que las desviaciones de reloj tienen sobre los puntos de equilibrio de frecuencia y potencia activa, c) modelo de lazo cerrado adaptable a todas las políticas, d) análisis de estabilidad de los puntos de equilibrio, y e) resultados experimentales. El segundo tema hace frente al análisis del efecto que las fallas eléctricas y de comunicaciones tienen sobre la regulación de frecuencia y el uso compartido de potencia activa. Esta parte se centra en políticas de control distribuido/cooperativo donde cada acción de control del inversor se calcula utilizando medidas locales y datos recibidos de otros inversores de la MG. Esta parte, descrita a través de un artículo de conferencia y dos de revista, investiga dos políticas de control cuando particiones en la MG son provocadas por daños en los enlaces de alimentación y/o por pérdida de comunicación entre inversores. Las contribuciones relacionadas con este tema son a) formulación de la MG como dos grafos correspondientes a las redes eléctrica y de comunicación donde ambos tipos de fallas conducen a sub-grafos eléctricos/comunicacionales desconectados, llamados particiones, que coexisten dentro de la MG, b) modelo de lazo cerrado que integra las matrices Laplacianas de los dos grafos, c) análisis de estabilidad que identifica las particiones que pueden conducir a inestabilidad en la MG, d) análisis de estado estacionario para calcular puntos de equilibrio cuando la dinámica es estable, e) nueva estrategia basada en principios de control conmutado para evitar el escenario de inestabilidad, y f) resultados experimentales. Con el fin de verificar el rendimiento operativo de los resultados analíticos, se han realizado diversos experimentos sobre una microred de laboratorio, los mismos que se discuten en términos de los objetivos de la tesis. El trabajo finaliza con las conclusionesPostprint (published version

Enabling grid-feeding converters with a dissonant-resonant controller for negative-sequence voltage elimination

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThe mitigation of the adverse effects of voltage unbalance in equipment and power quality can be performed by the power electronic converters that interface distributed generators to the grid. Inspired in a resonant controller, this article presents a dissonant-resonant controller for negative-sequence voltage elimination for a grid-feeding converter connected to the grid. The controller eliminates the negative-sequence voltage at the converter output with a regulable precision, it does not require knowing the grid impedance for successful operation, and it can be a good candidate for parallel operation because it operates not like an integrator, but like an “untuned” integrator. Using the stationary aß frame, a closed-loop model is developed in a complex space vector built from the complexification of the stationary components. This allows extracting stability conditions for safe closed-loop operation as well as deriving design guidelines for the controller parameters. Numerical and experimental results show the ability of the proposed controller to meet its design goals, thus, corroborating the theoretical approachPeer ReviewedPostprint (author's final draft

Distributed control of a fault tolerant modular multilevel inverter for direct-drive wind turbine grid interfacing

Modular generator and converter topologies are being pursued for large offshore wind turbines to achieve fault tolerance and high reliability. A centralized controller presents a single critical point of failure which has prevented a truly modular and fault tolerant system from being obtained. This study analyses the inverter circuit control requirements during normal operation and grid fault ride-through, and proposes a distributed controller design to allow inverter modules to operate independently of each other. All the modules independently estimate the grid voltage magnitude and position, and the modules are synchronised together over a CAN bus. The CAN bus is also used to interleave the PWM switching of the modules and synchronise the ADC sampling. The controller structure and algorithms are tested by laboratory experiments with respect to normal operation, initial synchronization to the grid, module fault tolerance and grid fault ride-through