33,959 research outputs found
Cognitive Radio for Emergency Networks
In the scope of the Adaptive Ad-hoc Freeband (AAF) project, an emergency network built on top of Cognitive Radio is proposed to alleviate the spectrum shortage problem which is the major limitation for emergency networks. Cognitive
Radio has been proposed as a promising technology to solve
todayâ?~B??~D?s spectrum scarcity problem by allowing a secondary user in the non-used parts of the spectrum that aactully are assigned to primary services. Cognitive Radio has to work in different frequency bands and various wireless channels and supports multimedia services. A heterogenous reconfigurable System-on-Chip (SoC) architecture is proposed to enable the evolution from the traditional software defined radio to Cognitive Radio
Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks
Cognitive radio has been widely considered as one of the prominent solutions
to tackle the spectrum scarcity. While the majority of existing research has
focused on single-band cognitive radio, multiband cognitive radio represents
great promises towards implementing efficient cognitive networks compared to
single-based networks. Multiband cognitive radio networks (MB-CRNs) are
expected to significantly enhance the network's throughput and provide better
channel maintenance by reducing handoff frequency. Nevertheless, the wideband
front-end and the multiband spectrum access impose a number of challenges yet
to overcome. This paper provides an in-depth analysis on the recent
advancements in multiband spectrum sensing techniques, their limitations, and
possible future directions to improve them. We study cooperative communications
for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also
investigate several limits and tradeoffs of various design parameters for
MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that
differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE
Journal, Special Issue on Future Radio Spectrum Access, March 201
Xampling: Signal Acquisition and Processing in Union of Subspaces
We introduce Xampling, a unified framework for signal acquisition and
processing of signals in a union of subspaces. The main functions of this
framework are two. Analog compression that narrows down the input bandwidth
prior to sampling with commercial devices. A nonlinear algorithm then detects
the input subspace prior to conventional signal processing. A representative
union model of spectrally-sparse signals serves as a test-case to study these
Xampling functions. We adopt three metrics for the choice of analog
compression: robustness to model mismatch, required hardware accuracy and
software complexities. We conduct a comprehensive comparison between two
sub-Nyquist acquisition strategies for spectrally-sparse signals, the random
demodulator and the modulated wideband converter (MWC), in terms of these
metrics and draw operative conclusions regarding the choice of analog
compression. We then address lowrate signal processing and develop an algorithm
for that purpose that enables convenient signal processing at sub-Nyquist rates
from samples obtained by the MWC. We conclude by showing that a variety of
other sampling approaches for different union classes fit nicely into our
framework.Comment: 16 pages, 9 figures, submitted to IEEE for possible publicatio
Green Cellular Networks: A Survey, Some Research Issues and Challenges
Energy efficiency in cellular networks is a growing concern for cellular
operators to not only maintain profitability, but also to reduce the overall
environment effects. This emerging trend of achieving energy efficiency in
cellular networks is motivating the standardization authorities and network
operators to continuously explore future technologies in order to bring
improvements in the entire network infrastructure. In this article, we present
a brief survey of methods to improve the power efficiency of cellular networks,
explore some research issues and challenges and suggest some techniques to
enable an energy efficient or "green" cellular network. Since base stations
consume a maximum portion of the total energy used in a cellular system, we
will first provide a comprehensive survey on techniques to obtain energy
savings in base stations. Next, we discuss how heterogeneous network deployment
based on micro, pico and femto-cells can be used to achieve this goal. Since
cognitive radio and cooperative relaying are undisputed future technologies in
this regard, we propose a research vision to make these technologies more
energy efficient. Lastly, we explore some broader perspectives in realizing a
"green" cellular network technologyComment: 16 pages, 5 figures, 2 table
Compressive Sensing for Spread Spectrum Receivers
With the advent of ubiquitous computing there are two design parameters of
wireless communication devices that become very important power: efficiency and
production cost. Compressive sensing enables the receiver in such devices to
sample below the Shannon-Nyquist sampling rate, which may lead to a decrease in
the two design parameters. This paper investigates the use of Compressive
Sensing (CS) in a general Code Division Multiple Access (CDMA) receiver. We
show that when using spread spectrum codes in the signal domain, the CS
measurement matrix may be simplified. This measurement scheme, named
Compressive Spread Spectrum (CSS), allows for a simple, effective receiver
design. Furthermore, we numerically evaluate the proposed receiver in terms of
bit error rate under different signal to noise ratio conditions and compare it
with other receiver structures. These numerical experiments show that though
the bit error rate performance is degraded by the subsampling in the CS-enabled
receivers, this may be remedied by including quantization in the receiver
model. We also study the computational complexity of the proposed receiver
design under different sparsity and measurement ratios. Our work shows that it
is possible to subsample a CDMA signal using CSS and that in one example the
CSS receiver outperforms the classical receiver.Comment: 11 pages, 11 figures, 1 table, accepted for publication in IEEE
Transactions on Wireless Communication
A Comprehensive Experimental Comparison of Event Driven and Multi-Threaded Sensor Node Operating Systems
The capabilities of a sensor network are strongly influenced by the operating system used on the sensor nodes. In general, two different sensor network operating system types are currently considered: event driven and multi-threaded. It is commonly assumed that event driven operating systems are more suited to sensor networks as they use less memory and processing resources. However, if factors other than resource usage are considered important, a multi-threaded system might be preferred. This paper compares the resource needs of multi-threaded and event driven sensor network operating systems. The resources considered are memory usage and power consumption. Additionally, the event handling capabilities of event driven and multi-threaded operating systems are analyzed and compared. The results presented in this paper show that for a number of application areas a thread-based sensor network operating system is feasible and preferable
Sub-Nyquist Sampling: Bridging Theory and Practice
Sampling theory encompasses all aspects related to the conversion of
continuous-time signals to discrete streams of numbers. The famous
Shannon-Nyquist theorem has become a landmark in the development of digital
signal processing. In modern applications, an increasingly number of functions
is being pushed forward to sophisticated software algorithms, leaving only
those delicate finely-tuned tasks for the circuit level.
In this paper, we review sampling strategies which target reduction of the
ADC rate below Nyquist. Our survey covers classic works from the early 50's of
the previous century through recent publications from the past several years.
The prime focus is bridging theory and practice, that is to pinpoint the
potential of sub-Nyquist strategies to emerge from the math to the hardware. In
that spirit, we integrate contemporary theoretical viewpoints, which study
signal modeling in a union of subspaces, together with a taste of practical
aspects, namely how the avant-garde modalities boil down to concrete signal
processing systems. Our hope is that this presentation style will attract the
interest of both researchers and engineers in the hope of promoting the
sub-Nyquist premise into practical applications, and encouraging further
research into this exciting new frontier.Comment: 48 pages, 18 figures, to appear in IEEE Signal Processing Magazin
Communication channel analysis and real time compressed sensing for high density neural recording devices
Next generation neural recording and Brain-
Machine Interface (BMI) devices call for high density or distributed
systems with more than 1000 recording sites. As the
recording site density grows, the device generates data on the
scale of several hundred megabits per second (Mbps). Transmitting
such large amounts of data induces significant power
consumption and heat dissipation for the implanted electronics.
Facing these constraints, efficient on-chip compression techniques
become essential to the reduction of implanted systems power
consumption. This paper analyzes the communication channel
constraints for high density neural recording devices. This paper
then quantifies the improvement on communication channel
using efficient on-chip compression methods. Finally, This paper
describes a Compressed Sensing (CS) based system that can
reduce the data rate by > 10x times while using power on
the order of a few hundred nW per recording channel
- …