1,669 research outputs found
Coordinated Dynamic Spectrum Management of LTE-U and Wi-Fi Networks
This paper investigates the co-existence of Wi-Fi and LTE in emerging
unlicensed frequency bands which are intended to accommodate multiple radio
access technologies. Wi-Fi and LTE are the two most prominent access
technologies being deployed today, motivating further study of the inter-system
interference arising in such shared spectrum scenarios as well as possible
techniques for enabling improved co-existence. An analytical model for
evaluating the baseline performance of co-existing Wi-Fi and LTE is developed
and used to obtain baseline performance measures. The results show that both
Wi-Fi and LTE networks cause significant interference to each other and that
the degradation is dependent on a number of factors such as power levels and
physical topology. The model-based results are partially validated via
experimental evaluations using USRP based SDR platforms on the ORBIT testbed.
Further, inter-network coordination with logically centralized radio resource
management across Wi-Fi and LTE systems is proposed as a possible solution for
improved co-existence. Numerical results are presented showing significant
gains in both Wi-Fi and LTE performance with the proposed inter-network
coordination approach.Comment: Accepted paper at IEEE DySPAN 201
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
Hierarchical fault tolerance in wireless networked control systems
Wireless Networked Control Systems (WNCS) have recently emerged as a replacement for wired control networks. Wireless networked control systems are more suitable for environments that require higher flexibility and robustness. In previous literature a wireless manufacturing line was proposed. The work-cells communication was through IEEE 802.11 technologies and a switched Ethernet backbone. This thesis is aiming to improve the current solution by adding a supervisor to the existing system. The supervisor could be either in passive or active mode. Passive supervisor would intervene when all controllers in the network fail, while active supervisor would act once any controller on the line fail. The system was simulated using OPNET software with 95% confidence analysis. The ability of the system to withstand external interference was assessed through adding a single band jammer to the OPNET simulation. The system was able to hold up to 8KB interfering file sent from a single band jammer affecting the full Wi-Fi spectrum. All results were subjected to a 95% confidence analysis The performability of passive and active supervisor systems was compared. A Markov model of both systems was built. It was shown that by time, the performability of a passive supervisor system is enhanced while that of an active supervisor system degraded. However, the active supervisor showed a better performability in all cases
- …