Fault-tolerant multichannel demultiplexer subsystems

Fault tolerance in future processing and switching communication satellites is addressed by showing new methods for detecting hardware failures in the first major subsystem, the multichannel demultiplexer. An efficient method for demultiplexing frequency slotted channels uses multirate filter banks which contain fast Fourier transform processing. All numerical processing is performed at a lower rate commensurate with the small bandwidth of each bandbase channel. The integrity of the demultiplexing operations is protected by using real number convolutional codes to compute comparable parity values which detect errors at the data sample level. High rate, systematic convolutional codes produce parity values at a much reduced rate, and protection is achieved by generating parity values in two ways and comparing them. Parity values corresponding to each output channel are generated in parallel by a subsystem, operating even slower and in parallel with the demultiplexer that is virtually identical to the original structure. These parity calculations may be time shared with the same processing resources because they are so similar

Discrete multitone modulation with principal component filter banks

Discrete multitone (DMT) modulation is an attractive method for communication over a nonflat channel with possibly colored noise. The uniform discrete Fourier transform (DFT) filter bank and cosine modulated filter bank have in the past been used in this system because of low complexity. We show in this paper that principal component filter banks (PCFB) which are known to be optimal for data compression and denoising applications, are also optimal for a number of criteria in DMT modulation communication. For example, the PCFB of the effective channel noise power spectrum (noise psd weighted by the inverse of the channel gain) is optimal for DMT modulation in the sense of maximizing bit rate for fixed power and error probabilities. We also establish an optimality property of the PCFB when scalar prefilters and postfilters are used around the channel. The difference between the PCFB and a traditional filter bank such as the brickwall filter bank or DFT filter bank is significant for effective power spectra which depart considerably from monotonicity. The twisted pair channel with its bridged taps, next and fext noises, and AM interference, therefore appears to be a good candidate for the application of a PCFB. This is demonstrated with the help of numerical results for the case of the ADSL channel

Reflectance Hashing for Material Recognition

We introduce a novel method for using reflectance to identify materials. Reflectance offers a unique signature of the material but is challenging to measure and use for recognizing materials due to its high-dimensionality. In this work, one-shot reflectance is captured using a unique optical camera measuring {\it reflectance disks} where the pixel coordinates correspond to surface viewing angles. The reflectance has class-specific stucture and angular gradients computed in this reflectance space reveal the material class. These reflectance disks encode discriminative information for efficient and accurate material recognition. We introduce a framework called reflectance hashing that models the reflectance disks with dictionary learning and binary hashing. We demonstrate the effectiveness of reflectance hashing for material recognition with a number of real-world materials

Construction of M - Band bandlimited wavelets for orthogonal decomposition

While bandlimited wavelets and associated IIR filters have shown serious potential in areas of pattern recognition and communications, the dyadic Meyer wavelet is the only known approach to construct bandlimited orthogonal decomposition. The sine scaling function and wavelet are a special case of the Meyer. Previous works have proposed a M - Band extension of the Meyer wavelet without solving the problem. One key contribution of this thesis is the derivation of the correct bandlimits for the scaling function and wavelets to guarantee an orthogonal basis. In addition, the actual construction of the wavelets based upon these bandlimits is developed. A composite wavelet will be derived based on the M scale relationships from which we will extract the wavelet functions. A proper solution to this task is proposed which will generate associated filters with the knowledge of the scaling function and the constraints for Mband orthogonality

Practical Non-Uniform Channelization for Multistandard Base Stations

A Multistandard software-defined radio base station must perform non-uniform channelization of multiplexed frequency bands. Non-uniform channelization accounts for a significant portion of the digital signal processing workload in the base station receiver and can be difficult to realize in a physical implementation. In non-uniform channelization methods based on generalized DFT filter banks, large prototype filter orders are a significant issue for implementation. In this paper, a multistage filter design is applied to two different non-uniform generalized DFT-based channelizers in order to reduce their filter orders. To evaluate the approach, a TETRA and TEDS base station is used. Experimental results show that the new multistage design reduces both the number of coefficients and operations and leads to a more feasible design and practical physical implementation

Practical Non-Uniform Channelization for Multistandard Base Stations

A Multistandard software-defined radio base station must perform non-uniform channelization of multiplexed frequency bands. Non-uniform channelization accounts for a significant portion of the digital signal processing workload in the base station receiver and can be difficult to realize in a physical implementation. In non-uniform channelization methods based on generalized DFT filter banks, large prototype filter orders are a significant issue for implementation. In this paper, a multistage filter design is applied to two different non-uniform generalized DFT-based channelizers in order to reduce their filter orders. To evaluate the approach, a TETRA and TEDS base station is used. Experimental results show that the new multistage design reduces both the number of coefficients and operations and leads to a more feasible design and practical physical implementation

Enhancement of Single and Composite Images Based on Contourlet Transform Approach

Image enhancement is an imperative step in almost every image processing algorithms. Numerous image enhancement algorithms have been developed for gray scale images despite their absence in many applications lately. This thesis proposes hew image enhancement techniques of 8-bit single and composite digital color images. Recently, it has become evident that wavelet transforms are not necessarily best suited for images. Therefore, the enhancement approaches are based on a new 'true' two-dimensional transform called contourlet transform. The proposed enhancement techniques discussed in this thesis are developed based on the understanding of the working mechanisms of the new multiresolution property of contourlet transform. This research also investigates the effects of using different color space representations for color image enhancement applications. Based on this investigation an optimal color space is selected for both single image and composite image enhancement approaches. The objective evaluation steps show that the new method of enhancement not only superior to the commonly used transformation method (e.g. wavelet transform) but also to various spatial models (e.g. histogram equalizations). The results found are encouraging and the enhancement algorithms have proved to be more robust and reliable

Advancements of MultiRate Signal processing for Wireless Communication Networks: Current State Of the Art

With the hasty growth of internet contact and voice and information centric communications, many contact technologies have been urbanized to meet the stringent insist of high speed information transmission and viaduct the wide bandwidth gap among ever-increasing high-data-rate core system and bandwidth-hungry end-user complex. To make efficient consumption of the limited bandwidth of obtainable access routes and cope with the difficult channel environment, several standards have been projected for a variety of broadband access scheme over different access situation (twisted pairs, coaxial cables, optical fibers, and unchanging or mobile wireless admittance). These access situations may create dissimilar channel impairments and utter unique sets of signal dispensation algorithms and techniques to combat precise impairments. In the intended and implementation sphere of those systems, many research issues arise. In this paper we present advancements of multi-rate indication processing methodologies that are aggravated by this design trend. The thesis covers the contemporary confirmation of the current literature on intrusion suppression using multi-rate indication in wireless communiquE9; networks