Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Simulation-based analysis for NBTI degradation in combinational CMOS VLSI circuits

The negative-bias temperature instability (NBTI) is one of the dominant aging degradation mechanisms in today Very Large Scale Integration (VLSI) Integrated Circuits (IC). With the further decreasing of the transistor dimensions and reduction of supply voltage, the NBTI degradation may become a critical reliability threat. Nevertheless, most of the EDA tools lack in the ability to predict and analyse the impact of the NBTI. Other tools able to analyse the NBTI, are often on very low design level and requiring significant computational resources. The purpose of this master work is to analyse the impact of the NBTI aging degradation in the combinational part of VLSI CMOS circuits. For that purpose, a gate-level NBTI simulation flow for estimating the degraded circuit performance parameters is proposed and implemented. The flow is NBTI model independent and tool independent. A particular implementation is made based on the Reaction-Diffusion NBTI model, and the tools: HotSpot 5.0, Candance Encounter, Synopsys Design Compiler, Synopsys Prime-Time. The results of the NBTI simulation are outputted in the format of statistical data of the gate delay degradation, the critical path delay degradation and length change, and the power consumption change. In addition, a heatmap visualizing the delay degradation is generated. Finally, a set of simulations are performed on circuits from the ISCAS89 and NXP benchmark suits. The statistical data are presented, and the impact of the NBTI degradation is analysed

Design for prognostics and security in field programmable gate arrays (FPGAs).

There is an evolutionary progression of Field Programmable Gate Arrays (FPGAs) toward more complex and high power density architectures such as Systems-on- Chip (SoC) and Adaptive Compute Acceleration Platforms (ACAP). Primarily, this is attributable to the continual transistor miniaturisation and more innovative and efficient IC manufacturing processes. Concurrently, degradation mechanism of Bias Temperature Instability (BTI) has become more pronounced with respect to its ageing impact. It could weaken the reliability of VLSI devices, FPGAs in particular due to their run-time reconfigurability. At the same time, vulnerability of FPGAs to device-level attacks in the increasing cyber and hardware threat environment is also quadrupling as the susceptible reliability realm opens door for the rogue elements to intervene. Insertion of highly stealthy and malicious circuitry, called hardware Trojans, in FPGAs is one of such malicious interventions. On the one hand where such attacks/interventions adversely affect the security ambit of these devices, they also undermine their reliability substantially. Hitherto, the security and reliability are treated as two separate entities impacting the FPGA health. This has resulted in fragmented solutions that do not reflect the true state of the FPGA operational and functional readiness, thereby making them even more prone to hardware attacks. The recent episodes of Spectre and Meltdown vulnerabilities are some of the key examples. This research addresses these concerns by adopting an integrated approach and investigating the FPGA security and reliability as two inter-dependent entities with an additional dimension of health estimation/ prognostics. The design and implementation of a small footprint frequency and threshold voltage-shift detection sensor, a novel hardware Trojan, and an online transistor dynamic scaling circuitry present a viable FPGA security scheme that helps build a strong microarchitectural level defence against unscrupulous hardware attacks. Augmented with an efficient Kernel-based learning technique for FPGA health estimation/prognostics, the optimal integrated solution proves to be more dependable and trustworthy than the prevalent disjointed approach.Samie, Mohammad (Associate)PhD in Transport System