Design of DMRS schemes for 5G vehicular communications

Proceeding of: 2021 IEEE 93rd Vehicular Technology Conference (VTC2021-Spring), 25-28 April 2021, Helsinki, Finland (Virtual edition)The arrival of the fifth generation (5G) of mobile communications is boosting vehicular communications, an important use case addressed in the recent years. LTE introduced a sidelink radio interface through which user equipment would communicate directly with no necessary dependence on the network, named PC5. 5G has defined its own sidelink interface, NR-Sidelink, envisaged to improve PC5. This paper analyses the use of Demodulation Reference Signals (DMRS) to estimate the channel in sidelink communications. Improving several mappings proposed by the standards, the main contribution proposed in this paper is a new DMRS mapping with a better performance. The proposed Unequal Pilot Spacing (UPS) mapping can enhance the standard with a satisfactory trade-off between performance and overhead.This work has been supported by the Spanish National Project TERESA-ADA (TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE)

Vehicular Wireless Communication Standards: Challenges and Comparison

Autonomous vehicles (AVs) are the future of mobility. Safe and reliable AVs are required for widespread adoption by a community which is only possible if these AVs can communicate with each other & with other entities in a highly efficient way. AVs require ultra-reliable communications for safety-critical applications to ensure safe driving. Existing vehicular communication standards, i.e., IEEE 802.11p (DSRC), ITS-G5, & LTE, etc., do not meet the requirements of high throughput, ultra-high reliability, and ultra-low latency along with other issues. To address these challenges, IEEE 802.11bd & 5G NR-V2X standards provide more efficient and reliable communication, however, these standards are in the developing stage. Existing literature generally discusses the features of these standards only and does not discuss the drawbacks. Similarly, existing literature does not discuss the comparison between these standards or discusses a comparison between any two standards only. However, this work comprehensively describes different issues/challenges faced by these standards. This work also comprehensively provides a comparison among these standards along with their salient features. The work also describes spectrum management issues comprehensively, i.e., interoperability issues, co-existence with Wi-Fi, etc. The work also describes different other issues comprehensively along with recommendations. The work describes that 802.11bd and 5G NR are the two potential future standards for efficient vehicle communications; however, these standards must be able to provide backward compatibility, interoperability, and co-existence with current and previous standards

Analysis of V2X Sidelink Positioning in sub-6 GHz

Radio positioning is an important part of joint communication and sensing in beyond 5G communication systems. Existing works mainly focus on the mmWave bands and under-utilize the sub-6 GHz bands, even though it is promising for accurate positioning, especially when the multipath is uncomplicated, and meaningful in several important use cases. In this paper, we analyze V2X sidelink positioning and propose a new performance bound that can predict the positioning performance in the presence of severe multipath. Simulation results using ray-tracing data demonstrate the possibility of sidelink positioning, and the efficacy of the new performance bound and its relation with the complexity of the multipath

Benchmarking the cooperative awareness service at application layer with IEEE 802.11p and LTE-PC5 Mode-4

© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. Al document ha d’aparèixer l’enllaç a la publicació original a IEEE, o bé al Digital Object Identifier (DOI).Vehicular communications hold the promise of disrupting mobility services and supporting the mass adoption of future autonomous vehicles. Regulators have set aside specific spectrum at the 5.9 GHz band to support Intelligent Transport Systems (ITS) safety applications, for which a world-wide adoption of a standardized radio technology is a key factor to deliver on this promise. Two technologies are currently positioned to begin its commercial path, IEEE 802.11p and LTE-PC5 Mode-4. The main differences between these technologies lie on the design of their channel access mechanisms. This paper provides an analysis of the impact that the Medium Access Control (MAC) mechanisms included in 802.11p and LTE-PC5 Mode-4 will have on the performance of the applications using the Cooperative Awareness Service, applying two new application-level metrics used by safety applications: Neighborhood Awareness Ratio and Position Error. We have found that, even with an equivalent physical layer performance, the MAC layer of LTE-PC5 Mode-4 will mostly outperform the MAC layer of IEEE 802.11p (or its not yet ready enhanced version 802.11bd). However, IEEE 802.11p/bd results in slightly better vehicle positioning accuracy at lower distances.Peer ReviewedPostprint (author's final draft

Performance analysis of V2X technologies 802.11p and LTE-PC5

The concept of Digital Twin (DT) has been broadly adopted in the Industry 4.0, in the healthcare and in the Smart Cities. It represents a digital model of the reality where it is possible to test and evaluate different actions before implementing them into the real world. In the context of Smart City, the digital copy of the city includes the representation of the road infrastructure, vehicles, pedestrians, .... Its main objectives are to ease the road maintenance, to provide the means for mobility simulations, and to create traffic information management systems. This prNowadays, Vehicular-to-Everything (V2X) communications are becoming an essential element to improve safe driving conditions and autonomous driving. This thesis presents a comparison of two V2X communication technologies: IEEE 802.11p, and Cellular-V2X. The objective of this study is to evaluate the performance of both technologies in terms of the Medium Acces Control (MAC) layer, especially in a congested environment. Therefore, we analyze the different schemes used on these technologies to access shared channel resources and avoid interferences. The study is conducted using several simulation tools: SUMO which allows us to create personalized scenarios, and OMNeT++ used to simulate the network and transmit all the V2X messages between the vehicles. With SUMO we created a highway scenario that can support a high density of vehicles. And OMNeT++ is used to change the main simulation parameters, and obtain results such as all the packets received and sent through the network. Finally, we defined some performance metrics to analyze the results and observe how the technologies react over a congested scenario, with high densities of vehicles

A Hardware-in-the-Loop Evaluation of the Impact of the V2X Channel on the Traffic-Safety Versus Efficiency Trade-offs

Vehicles are increasingly becoming connected and short-range wireless communications promise to introduce a radical change in the drivers' behaviors. Among the main use cases, the intersection management is surely one of those that could mostly impact on both traffic safety and efficiency. In this work, we consider an intersection collision warning application and exploit an hardware-in-the-loop (HIL) platform to verify the impact on the risk of accidents as well as the average time to travel a given distance. Besides including real ITS-G5 compliant message exchanges, the platform also includes a channel emulator with real signals. Results show that the risk of collisions can be drastically reduced, with an overall trade-off between safety and traffic efficiency. At the same time, it is shown that the presence of real channel conditions cannot guarantee the same condition of zero-risk as with ideal channel propagation, remarking the importance of channel conditions and signal processing