The Aphids (Homoptera: Aphididae) Associated With Bell Peppers and Surrounding Vegetation in Southern Illinois

Outbreaks of cucumber mosaic virus (CMV) disease, caused by an aphid- transmitted pathogen, greatly reduced yields of bell pepper in southern Illinois in the mid-1990s. To provide the basis for further studies of the roles of individual apbid species in virus transmission, we surveyed aphid flights in and around pepper fields in 1996 and 1997 by using suction traps, interception nets, landing traps, sweep nets, and hand-picking. We collected 78 species of aphids, 15 of which have been reported to transmit CMV to peppers. The most abundant species taken from suction traps and interception nets in combination were Lipaphis erysimi, Rhopalosiphum padi, Rhopalosiphum maidis, Schizaphis graminum, and Aphis craccivora. All of these species are known to transmit CMV to peppers, but the phenology of R. maidis in Illinois suggests it is not the vector that brings CMV to pepper fields to initiate disease outbreaks. Brachycaudus helichrysi was relatively abundant in 1996 in May and June when a CMV outbreak may have been initiated; it was absent in 1997, and CMV infections were rare that season. Two species, Carolinaia carolinensis and Myzus hemerocallis were recorded for the first time in Illinois

Assessment of vector/host contact: comparison of animal-baited traps and UV-light/suction trap for collecting Culicoides biting midges (Diptera: Ceratopogonidae), vectors of Orbiviruses

BACKGROUND The emergence and massive spread of bluetongue in Western Europe during 2006-2008 had disastrous consequences for sheep and cattle production and confirmed the ability of Palaearctic Culicoides (Diptera: Ceratopogonidae) to transmit the virus. Some aspects of Culicoides ecology, especially host-seeking and feeding behaviors, remain insufficiently described due to the difficulty of collecting them directly on a bait animal, the most reliable method to evaluate biting rates.Our aim was to compare typical animal-baited traps (drop trap and direct aspiration) to both a new sticky cover trap and a UV-light/suction trap (the most commonly used method to collect Culicoides). METHODS/RESULTS Collections were made from 1.45 hours before sunset to 1.45 hours after sunset in June/July 2009 at an experimental sheep farm (INRA, Nouzilly, Western France), with 3 replicates of a 4 sites×4 traps randomized Latin square using one sheep per site. Collected Culicoides individuals were sorted morphologically to species, sex and physiological stages for females. Sibling species were identified using a molecular assay. A total of 534 Culicoides belonging to 17 species was collected. Abundance was maximal in the drop trap (232 females and 4 males from 10 species) whereas the diversity was the highest in the UV-light/suction trap (136 females and 5 males from 15 species). Significant between-trap differences abundance and parity rates were observed. CONCLUSIONS Only the direct aspiration collected exclusively host-seeking females, despite a concern that human manipulation may influence estimation of the biting rate. The sticky cover trap assessed accurately the biting rate of abundant species even if it might act as an interception trap. The drop trap collected the highest abundance of Culicoides and may have caught individuals not attracted by sheep but by its structure. Finally, abundances obtained using the UV-light/suction trap did not estimate accurately Culicoides biting rate.This study was funded partly by CIRAD and partly by the Ministry of Agriculture, Food, Fishing and Rural Affairs

A bibliography of samplers for benthic invertebrates

This annotated bibliography covers literature to the end of November 1977, and includes references to samplers that could be used for the rapid removal of benthic invertebrates from natural substrata of rivers and streams. Marine samplers which have been, or could be, used in freshwater. Coverage of Russian literature is incomplete, although a selection of recent and important references are included. The references are arranged under the following headings, Reviews; Nets and quadrat samplers; Scoops, shovels and dredges; Grabs; Corers; Suction and air-lift samplers; Electroshocking samplers; Efficiencies and comparisons; and Samplers from catalogues. There is an index to samplers (by the common name) and an author index

A percutaneous needle biopsy technique for sampling the supraclavicular brown adipose tissue depot of humans.

Brown adipose tissue (BAT) has been proposed as a potential target tissue against obesity and its related metabolic complications. Although the molecular and functional characteristics of BAT have been intensively studied in rodents, only a few studies have used human BAT specimens due to the difficulty of sampling human BAT deposits. We established a novel positron emission tomography and computed tomography-guided Bergström needle biopsy technique to acquire human BAT specimens from the supraclavicular area in human subjects. Forty-three biopsies were performed on 23 participants. The procedure was tolerated well by the majority of participants. No major complications were noted. Numbness (9.6%) and hematoma (2.3%) were the two minor complications noted, which fully resolved. Thus, the proposed biopsy technique can be considered safe with only minimal risk of adverse events. Adoption of the proposed method is expected to increase the sampling of the supraclavicular BAT depot for research purposes so as to augment the scientific knowledge of the biology of human BAT

Impact of temperature on the pullout of reinforcing geotextiles from unsaturated silt

This study investigates the thermal soil-geosynthetic interaction mechanisms of reinforcing geotextiles confined in compacted silt that may be encountered when using mechanically-stabilized earth (MSE) walls as geothermal heat sinks. A thermo-mechanical geosynthetic pullout device was used that incorporates standard components for geosynthetic pullout or creep testing but also heating elements at the top and bottom of the soil box to apply boundary temperatures and dielectric sensors embedded in the soil layer to monitor distributions in temperature and volumetric water content. Two test series were performed: the first involves monotonic pullout of woven polypropylene geotextiles after reaching steady-state conditions under different boundary temperatures without a seating load, and the second involves monotonic pullout of woven polyethylene-terephthalate geotextiles after reaching steady-state conditions under different boundary temperatures with a seating pullout load. The results indicate that the pullout resistance of both geotextiles decreased with increasing temperature. Although heating led to drying of the unsaturated silt layers as expected, measurements from the second test series indicate accumulation of water at the silt-geotextile interface. An effective stress analysis considering thermal softening of soils indicates that the increase in effective saturation at the silt-geotextile interface was the cause of the decrease in pullout resistance with heating

On-sample water content measurement for a complete local monitoring in triaxial testing of unsaturated soils

To provide a complete local monitoring of the state of an unsaturated soil sample during triaxial testing, a local water content measurement device was adapted to a triaxial device comprising the measurement of local displacements (Hall effect transducers) and suction (High capacity transducer). Water content was locally monitored by means of a resistivity probe. The water content/resistivity calibration curves of an intact natural unsaturated loess from Northern France extracted by block sampling at two depths (1 and 3.3 m) were carefully determined, showing good accuracy and repeatability. The validity of two models giving the resistivity of unsaturated soils with respect to their water content was examined

Observation and modeling of the suction pump effect during rapid dilatant slip

The temporary pressure drop observed during post-peak dilatant slip in axi-symmetric testing of a porous aeolian sandstone is modeled using a simple function of opening caused by sliding along the fault surface. Results suggest dilatancy of 0.02 mm accompanying frictional sliding, less than 10% of the typical grain diameter of 0.25–0.50 mm. The rapid void opening, under nominally undrained conditions at constant upstream flow rate, causes a strong ‘suction pump’ effect. A theoretical maximum pressure drop of 0.09 MPa or more, consistent with the experimentally measured results, can occur without a change in permeability properties

Impact of the commercial fishery on the population of bait shrimp (Penaeus spp.) in Biscayne Bay, 1986

Monthly population size of bait shrimp in the Bay was estimated from December 1984 to July 1985. Growth rates for male and female P. duorarum showed that pink shrimp exhibit a mean residence time in the nursery area (Biscayne Bay) of approximately 21 weeks. Monthly mortality rates were determined for each sex of pink shrimp. It was estimated that 23% and 26% of the male and female monthly population size, respectively, was absorbed by both the fishery and ecosystem monthly. Monthly proportion of the standing stock expected to die exclusively through fishing was 6.5% and 6.0% for males and females respectively. Estimates of emigration rates showed that approximately 4.0% of the population was lost from the Bay system each month. This surplus production was about 50% of the average monthly catch by the fleet. Fishing mortality represents only 8 - 9% of the losses to the shrimp population. The biggest source of loss is emigration, suggesting that most shrimp beyond the size at recruitment (to the fishery) are not utilized for food while in the Bay. Thus, it appears that the direct impact of the fishery on the bait shrimp population is relatively small. (PDF contains 46 pages

Effects of harvesting methods on sustainability of a bay scallop fishery: dredging uproots seagrass and displaces recruits

Fishing is widely recognized to have profound effects on estuarine and marine ecosystems (Hammer and Jansson, 1993; Dayton et al., 1995). Intense commercial and recreational harvest of valuable species can result in population collapses of target and nontarget species (Botsford et al., 1997; Pauly et al., 1998; Collie et al. 2000; Jackson et al., 2001). Fishing gear, such as trawls and dredges, that are dragged over the seafloor inflict damage to the benthic habitat (Dayton et al., 1995; Engel and Kvitek, 1995; Jennings and Kaiser, 1998; Watling and Norse, 1998). As the growing human population, over-capitalization, and increasing government subsidies of fishing place increasing pressures on marine resources (Myers, 1997), a clear understanding of the mechanisms by which fishing affects coastal systems is required to craft sustainable fisheries management