248 research outputs found
A Novel Fiber Jamming Theory and Experimental Verification
This thesis developed a novel theory of fiber jamming and experimentally verified it. The theory relates the performance, which is the ratio between the stiff and soft states of a fiber jamming chamber, to three relative design parameters: the ratio of the wall thickness to the membrane inner diameter, the ratio of the fiber diameter to membrane inner diameter, and the number of fibers. These three parameters, when held constant across different chamber sizes, hold the performance constant. To test the theory, three different types of fiber jamming chambers were built in three different sizes. Each chamber was set up as a cantilever beam and deflected 10mm in both the un-jammed (soft) and jammed (stiff) states. When the three design parameters were held constant, the performance of the chamber was consistent within 10\%. In contrast, when the parameters were altered, there was a statistically significant and noticeable effect on chamber performance. These two results can be used in tandem to design miniaturized fiber jamming chambers. These results also have a direct application in soft robots designed for minimally invasive surgery
An Abdominal Phantom with Tunable Stiffness Nodules and Force Sensing Capability for Palpation Training
Robotic phantoms enable advanced physical examination training before using human patients. In this paper, we present an abdominal phantom for palpation training with controllable stiffness liver nodules that can also sense palpation forces. The coupled sensing and actuation approach is achieved by pneumatic control of positive-granular jammed nodules for
tunable stiffness. Soft sensing is done using the variation of internal pressure of the nodules under external forces. This paper makes original contributions to extend the linear region of the neo-Hookean characteristic of the mechanical behavior of the nodules by 140% compared to no-jamming conditions and to propose a method using the organ level controllable nodules as sensors to estimate palpation position and force with a root-means-quare error (RMSE) of 4% and 6.5%, respectively. Compared to conventional soft sensors, the method allows the phantom to sense with no interference to the simulated physiological conditions when providing quantified feedback to trainees, and to enable training following current bare-hand examination protocols without the need to wear data gloves to collect data.This work was supported in part by the Engineering and
Physical Sciences Research Council (EPSRC) MOTION grant
EP/N03211X/2 and EP/N03208X/1, and EPSRC RoboPatient
grant EP/T00603X/
GRAINS: Proximity Sensing of Objects in Granular Materials
Proximity sensing detects an object's presence without contact. However,
research has rarely explored proximity sensing in granular materials (GM) due
to GM's lack of visual and complex properties. In this paper, we propose a
granular-material-embedded autonomous proximity sensing system (GRAINS) based
on three granular phenomena (fluidization, jamming, and failure wedge zone).
GRAINS can automatically sense buried objects beneath GM in real-time manner
(at least ~20 hertz) and perceive them 0.5 ~ 7 centimeters ahead in different
granules without the use of vision or touch. We introduce a new spiral
trajectory for the probe raking in GM, combining linear and circular motions,
inspired by a common granular fluidization technique. Based on the observation
of force-raising when granular jamming occurs in the failure wedge zone in
front of the probe during its raking, we employ Gaussian process regression to
constantly learn and predict the force patterns and detect the force anomaly
resulting from granular jamming to identify the proximity sensing of buried
objects. Finally, we apply GRAINS to a Bayesian-optimization-algorithm-guided
exploration strategy to successfully localize underground objects and outline
their distribution using proximity sensing without contact or digging. This
work offers a simple yet reliable method with potential for safe operation in
building habitation infrastructure on an alien planet without human
intervention.Comment: 35 pages, 5 figures,2 tables. Videos available at
https://sites.google.com/view/grains2/hom
Active Vibration Fluidization for Granular Jamming Grippers
Granular jamming has recently become popular in soft robotics with widespread
applications including industrial gripping, surgical robotics and haptics.
Previous work has investigated the use of various techniques that exploit the
nature of granular physics to improve jamming performance, however this is
generally underrepresented in the literature compared to its potential impact.
We present the first research that exploits vibration-based fluidisation
actively (e.g., during a grip) to elicit bespoke performance from granular
jamming grippers. We augment a conventional universal gripper with a
computer-controllled audio exciter, which is attached to the gripper via a 3D
printed mount, and build an automated test rig to allow large-scale data
collection to explore the effects of active vibration. We show that vibration
in soft jamming grippers can improve holding strength. In a series of studies,
we show that frequency and amplitude of the waveforms are key determinants to
performance, and that jamming performance is also dependent on temporal
properties of the induced waveform. We hope to encourage further study focused
on active vibrational control of jamming in soft robotics to improve
performance and increase diversity of potential applications.Comment: arXiv admin note: substantial text overlap with arXiv:2109.1049
Designing a robotic port system for laparo-endoscopic single-site surgery
Current research and development in the field of surgical interventions aim to reduce the invasiveness by using few incisions or natural orifices in the body to access the surgical site. Considering surgeries in the abdominal cavity, the Laparo-Endoscopic Single-site Surgery (LESS) can be performed through a single incision in the navel, reducing blood loss, post-operative trauma, and improving the cosmetic outcome. However, LESS results in less intuitive instrument control, impaired ergonomic, loss of depth and haptic perception, and restriction of
instrument positioning by a single incision. Robot-assisted surgery addresses these shortcomings, by introducing highly articulated, flexible robotic instruments, ergonomic control consoles with 3D visualization, and intuitive instrument control algorithms. The flexible robotic instruments are usually introduced into the abdomen via a rigid straight port, such that the positioning of the tools and therefore the accessibility of anatomical structures is still constrained by the incision location. To address this limitation, articulated ports for LESS are proposed by recent research works. However, they focus on only a few aspects, which are relevant to the surgery, such that a design considering all requirements for LESS has not been
proposed yet. This partially originates in the lack of anatomical data of specific applications. Further, no general design guidelines exist and only a few evaluation metrics are proposed. To target these challenges, this thesis focuses on the design of an articulated robotic port for LESS partial nephrectomy. A novel approach is introduced, acquiring the available abdominal workspace, integrated into the surgical workflow. Based on several generated patient datasets and developed metrics, design parameter optimization is conducted. Analyzing the surgical
procedure, a comprehensive requirement list is established and applied to design a robotic system, proposing a tendon-driven continuum robot as the articulated port structure. Especially, the aspects of stiffening and sterile design are addressed. In various experimental evaluations, the reachability, the stiffness, and the overall design are evaluated. The findings identify layer jamming as the superior stiffening method. Further, the articulated port is proven to enhance the accessibility of anatomical structures and offer a patient and incision location independent
design
The design, kinematics and torque analysis of the self-bending soft contraction actuator
This article presents the development of a self-bending contraction actuator (SBCA) through analysis of its structure, kinematics, and torque formulas, and then explores its applications. The proposed actuator has been fabricated by two methods to prove the efficiency of the human body inspiration, which represents the covering of human bones by soft tissues to protect the bone and give the soft texture. The SBCA provides bending behaviour along with a high force to-weight ratio. As with the simple pneumatic muscle actuator (PMA), the SBCA is soft and easy to implement. Both the kinematics and the torque formula presented for the SBCA are scalable and can be used with different actuator sizes. The bending actuator has been tested under an air pressure up to 500 kPa, and the behaviour of its bending angle, parameters, dimensions, and the bending torques have been illustrated. On the other hand, the experiments showed the efficient performances of the actuator and validate the proposed kinematics. Therefore, the actuator can be used in many different applications, such as soft grippers and continuum arms
A Stiffness-Adjustable Hyperredundant Manipulator Using a Variable Neutral-Line Mechanism for Minimally Invasive Surgery
In robotic single-port surgery, it is desirable for a manipulator to exhibit the property of variable stiffness. Small-port incisions may require both high flexibility of the manipulator for safety purposes, as well as high structural stiffness for operational precision and high payload capability. This paper presents a new hyperredundant tubular manipulator with a variable neutral-line mechanisms and adjustable stiffness. A unique asymmetric arrangement of the tendons and the links realizes both articulation of the manipulator and continuous stiffness modulation. This asymmetric motion of the manipulator is compensated by a novel actuation mechanism without affecting its structural stiffness. The paper describes the basic mechanics of the variable neutral-line manipulator, and its stiffness characteristics. Simulation and experimental results verify the performance of the proposed mechanism.Samsung Advanced Institute of Technolog
- …