Overview of ESA’s Earth Observation upcoming small satellites missions

The “New Space” paradigm, has enabled the creation of many new opportunities in the space sector like the development of a large number of missions based on small and nano-satellites. The European Space Agency (ESA) is supporting these new development approaches and technology advancements, including use of Commercial-Off-The-Shelf (COTS) components to enable missions based on small and nano satellites. ESA’s Earth Observation Programmes Directorate (ESA-EOP) is already involved not only in the implementation of technologies exploiting the capabilities offered by small and nano-satellites as a complement to the EOP scientific and application-driven flagship satellites, but also in the quick validation of new approaches like A.I, super resolution or more in general in orbit data processing. ESA-EOP developments in the area of small and nano satellites are spread in three different programmatic lines, each with its own objectives: Scout and F-sat Missions and the InCubed Programme. This paper presents the overall ESA-EOP small missions strategy providing a brief insight on the genesis of each programmatic line and their selection processes including an update of the status of the first initiatives and missions under development or study

Feasibility study of a multispectral camera with automatic processing onboard a 27U satellite using Model Based Space System Engineering

The paper discusses an experience in using SysML and the TTool software for the feasibility study of a novel multispectral camera for agricultural monitoring. Innovation lies in both automatic image processing onboard and mission control capabilities designed to comply with a 27U microsatellite. In addition to the mission accomplishment control, this innovative payload is capable of sending processed data directly to farms, critically reducing the delay between image making and its use in the field. This paper shows how MBSE and SysML may comply with phases 0 and A of a space project

Comparison of sea-ice freeboard distributions from aircraft data and cryosat-2

The only remote sensing technique capable of obtain- ing sea-ice thickness on basin-scale are satellite altime- ter missions, such as the 2010 launched CryoSat-2. It is equipped with a Ku-Band radar altimeter, which mea- sures the height of the ice surface above the sea level. This method requires highly accurate range measure- ments. During the CryoSat Validation Experiment (Cry- oVEx) 2011 in the Lincoln Sea, Cryosat-2 underpasses were accomplished with two aircraft, which carried an airborne laser-scanner, a radar altimeter and an electro- magnetic induction device for direct sea-ice thickness re- trieval. Both aircraft flew in close formation at the same time of a CryoSat-2 overpass. This is a study about the comparison of the sea-ice freeboard and thickness dis- tribution of airborne validation and CryoSat-2 measure- ments within the multi-year sea-ice region of the Lincoln Sea in spring, with respect to the penetration of the Ku- Band signal into the snow

Development of atmospheric correction algorithms for very high spectral and spatial resolution images: application to SEOSAT and the FLEX/Sentinel-3 missions

Advanced high spectral and spatial resolution imager spectrometers on board new generation of Earth Observation missions bring new exciting opportunities to the remote sensing scientific community. However, this progress goes hand in hand with new challenges. The exploitation of data acquired from these family of advanced instruments requires new processing algorithms able to deal with these particularities. As part of this evolution, atmospheric correction algorithms - a mandatory processing step applied prior to the Earth surface reflectance data exploitation - must be adapted or reformulated, thereby paying special attention to how atmospheric effects disturb the acquired signal in the spectral and spatial domains. For these reasons, this Thesis aims to develop new atmospheric correction strategies to be applied over very high spectral and spatial resolution data. Following this goal, this Thesis was conducted in the framework of two missions during their development phase: (1) the FLEX/Sentinel–3 tandem space mission (for high spectral resolution data) and, (2) the Ingenio/SEOsat space mission (for high spatial resolution data). In the context of these missions, an additional challenge is introduced when acquiring proximal remote sensing data for their validation. This is especially relevant for the FLEX mission, which is dedicated to monitor the weak Solar Induced Chlorophyll Fluorescence (SIF) signal. Following this motivation, the main objectives of this Thesis are threefold: The first objective involved to analyse atmospheric effects on the Ingenio/SEOsat high spatial and low spectral resolution satellite mission and to propose a new atmospheric correction strategy. This strategy was called Hybrid and combines: (1) a per–pixel atmospheric radiative transfer model inversion technique making use of auxiliary data to characterize the atmospheric state, followed by (2) an image deconvolution technique modelling the atmospheric MTF to correct for atmospheric spatial effects. The Hybrid method was applied to Sentinel–2 data, particularly over bands acquired at 10 m resolution due to its similarities with the Ingenio/SEOsat mission. The second objective involved to define a novel atmospheric correction strategy for the FLEX/Sentinel-3 tandem mission. The proposed strategy is a two-steps method where information from Sentinel-3 instruments, OLCI and SLSTR, is first used in synergy to characterize the aerosol and water vapour presence. The high spectral resolution of FLEX data is subsequently exploited to refine the previously aerosol characterization. As part of this objective, the suitability of all the approximations assumed in the formulation proposed for the atmospheric inversion of FLEX data was validated against the FLEX mission requirements. The third objective involved to develop a strategy that deals with the atmospheric correction of very high spectral and spatial resolution data acquired at lower atmospheric scales such as Unmanned Aerial Vehicles or systems mounted on towers. In this Thesis, it was demonstrated that even when acquiring the signal at proximal remote sensing scale, i.e., few meters from the target oxygen absorption must be compensated to properly estimate SIF within these spectral regions. For this reason, a strategy to compensate for the oxygen absorption while properly dealing with the instrumental spectral response function convolution was presented and tested using simulated data. Altogether, this work identified challenges associated to atmospheric correction when applying to high spatial and especially to very high spectral resolution data. In this Thesis, adequate formulations have been developed to resolve these difficulties, and successful methodologies have been designed for the particular cases of SEOsat (high spatial resolution) and FLEX (high spectral resolution); two future remote sensing space missions that will be launched in the forthcoming years

PyrSat - Prevention and response to wild fires with an intelligent Earth observation CubeSat

Forest fires are a pervasive and serious problem. Besides loss of life and extensive environmental damage, fires also result in substantial economic losses, not to mention property damage, injuries, displacements and hardships experienced by the affected citizens. This project proposes a low-cost intelligent hyperspectral 3U CubeSat for the production of fire risk and burnt area maps. It applies Machine Learning algorithms to autonomously process images and obtain final data products on-board the satellite for direct transmission to users on the ground. Used in combination with other services such as EFFIS or AFIS, the system could considerably reduce the extent and consequences of forest fires