1,414 research outputs found
Autonomous Locomotion Mode Transition Simulation of a Track-legged Quadruped Robot Step Negotiation
Multi-modal locomotion (e.g. terrestrial, aerial, and aquatic) is gaining
increasing interest in robotics research as it improves the robots
environmental adaptability, locomotion versatility, and operational
flexibility. Within the terrestrial multiple locomotion robots, the advantage
of hybrid robots stems from their multiple (two or more) locomotion modes,
among which robots can select from depending on the encountering terrain
conditions. However, there are many challenges in improving the autonomy of the
locomotion mode transition between their multiple locomotion modes. This work
proposed a method to realize an autonomous locomotion mode transition of a
track-legged quadruped robot steps negotiation. The autonomy of the
decision-making process was realized by the proposed criterion to comparing
energy performances of the rolling and walking locomotion modes. Two climbing
gaits were proposed to achieve smooth steps negotiation behaviours for energy
evaluation purposes. Simulations showed autonomous locomotion mode transitions
were realized for negotiations of steps with different height. The proposed
method is generic enough to be utilized to other hybrid robots after some
pre-studies of their locomotion energy performances
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
On Advanced Mobility Concepts for Intelligent Planetary Surface Exploration
Surface exploration by wheeled rovers on Earth's Moon (the two Lunokhods) and Mars (Nasa's Sojourner and the two MERs) have been followed since many years already very suc-cessfully, specifically concerning operations over long time. However, despite of this success, the explored surface area was very small, having in mind a total driving distance of about 8 km (Spirit) and 21 km (Opportunity) over 6 years of operation. Moreover, ESA will send its ExoMars rover in 2018 to Mars, and NASA its MSL rover probably this year. However, all these rovers are lacking sufficient on-board intelligence in order to overcome longer dis-tances, driving much faster and deciding autonomously on path planning for the best trajec-tory to follow. In order to increase the scientific output of a rover mission it seems very nec-essary to explore much larger surface areas reliably in much less time. This is the main driver for a robotics institute to combine mechatronics functionalities to develop an intelligent mo-bile wheeled rover with four or six wheels, and having specific kinematics and locomotion suspension depending on the operational terrain of the rover to operate. DLR's Robotics and Mechatronics Center has a long tradition in developing advanced components in the field of light-weight motion actuation, intelligent and soft manipulation and skilled hands and tools, perception and cognition, and in increasing the autonomy of any kind of mechatronic systems. The whole design is supported and is based upon detailed modeling, optimization, and simula-tion tasks. We have developed efficient software tools to simulate the rover driveability per-formance on various terrain characteristics such as soft sandy and hard rocky terrains as well as on inclined planes, where wheel and grouser geometry plays a dominant role. Moreover, rover optimization is performed to support the best engineering intuitions, that will optimize structural and geometric parameters, compare various kinematics suspension concepts, and make use of realistic cost functions like mass and consumed energy minimization, static sta-bility, and more. For self-localization and safe navigation through unknown terrain we make use of fast 3D stereo algorithms that were successfully used e.g. in unmanned air vehicle ap-plications and on terrestrial mobile systems. The advanced rover design approach is applica-ble for lunar as well as Martian surface exploration purposes. A first mobility concept ap-proach for a lunar vehicle will be presented
MECHANICAL DESIGN OF A LEGGED-WHEEL HYBRID QUADRUPED ROBOT FOR MULTI-TERRAIN NAVIGATION
The two most common modes of locomotion used by humans are legged mode and wheeled mode, the former an inherent gift while the latter being an ingenious invention on their part. While both have their advantages, they may fall short in some aspects for instance, legs may fail in terms of high speeds and wheels might prove not so handy in the more demanding and uneven terrains Thus, a leg-wheel hybrid platform promises to ensure both high speeds and good stability on a variety of terrains
Review article: locomotion systems for ground mobile robots in unstructured environments
Abstract. The world market of mobile robotics is expected to increase substantially in the next 20 yr, surpassing the market of industrial robotics in terms of units and sales. Important fields of application are homeland security, surveillance, demining, reconnaissance in dangerous situations, and agriculture. The design of the locomotion systems of mobile robots for unstructured environments is generally complex, particularly when they are required to move on uneven or soft terrains, or to climb obstacles. This paper sets out to analyse the state-of-the-art of locomotion mechanisms for ground mobile robots, focussing on solutions for unstructured environments, in order to help designers to select the optimal solution for specific operating requirements. The three main categories of locomotion systems (wheeled - W, tracked - T and legged - L) and the four hybrid categories that can be derived by combining these main locomotion systems are discussed with reference to maximum speed, obstacle-crossing capability, step/stair climbing capability, slope climbing capability, walking capability on soft terrains, walking capability on uneven terrains, energy efficiency, mechanical complexity, control complexity and technology readiness. The current and future trends of mobile robotics are also outlined
- âŠ