A novel spherical permanent magnet actuator with three degrees-of-freedom

The paper describes a new version of spherical actuator, which is capable of three degrees-of-freedom and a high specific torque. The three-dimensional magnetic field distribution is established using an analytical technique formulated in spherical co-ordinates, and enables the torque vector and back-emf to be derived in closed forms. This facilitates the characterisation of the actuator, and provides the foundation for design optimisation, actuator dynamic modelling and servo control developmen

A novel spherical actuator: Design and control

The paper describes the design and control of a novel spherical permanent magnet actuator which is capable of two-degrees-freedom and a high specific torque. Based on an analytical actuator model, an optimal design procedure is developed to yield maximum output torque or maximum system acceleration for a given payload. The control of the actuator, whose dynamics are similar to those of robotic manipulators, is facilitated by the establishment of a complete actuation system model. A robust control law is applied, and its effectiveness is demonstrated by computer simulatio

Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator

Abstract—This paper describes a computational and experimental study of a two-degree-of-freedom spherical permanent-magnet actuator equipped with an iron stator. In particular, it considers the effect of introducing an aperture in the stator core to facilitate access to the armature. The resultant magnetic field distribution in the region occupied by the stator windings, the net unbalanced radial force, and the resulting reluctance torque are determined by three-dimensional magnetostatic finite-element analysis. The predicted reluctance torque is validated experimentally, and its implications on actuator performance are described

Computer simulation and design of a three degree-of-freedom shoulder module

An in-depth kinematic analysis of a three degree of freedom fully-parallel robotic shoulder module is presented. The major goal of the analysis is to determine appropriate link dimensions which will provide a maximized workspace along with desirable input to output velocity and torque amplification. First order kinematic influence coefficients which describe the output velocity properties in terms of actuator motions provide a means to determine suitable geometric dimensions for the device. Through the use of computer simulation, optimal or near optimal link dimensions based on predetermined design criteria are provided for two different structural designs of the mechanism. The first uses three rotational inputs to control the output motion. The second design involves the use of four inputs, actuating any three inputs for a given position of the output link. Alternative actuator placements are examined to determine the most effective approach to control the output motion

Control of a multi-degree of freedom worktool for vibrations assisted forging

This paper addresses the control of a tool developed to superimpose vibrations along several directions on a piece during forging. Piezoelectric actuators are used to provide the required forces and speeds. Due to the minute displacements of the actuators, flexible hinges are used in a special arrangement in order realize the specified movements and to ensure controllability. The experimental results confirm the approach