Energy efficiency-spectral efficiency trade-off of transmit antenna selection

We investigate the energy efficiency-spectral efficiency (EE-SE) trade-off of transmit antenna selection/maximum ratio combining (TAS) scheme. A realistic power consumption model (PCM) is considered, and it is shown that using TAS can provide significant energy savings when compared to multiple-input multiple-output (MIMO) in the low to medium SE region, regardless the number of antennas, as well as outperform transmit beamforming scheme (MRT) for the entire SE range. For a fixed number of receive antennas, our results also show that the EE gain of TAS over MIMO becomes even greater as the number of transmit antennas increases. The optimal value of SE that maximizes the EE is obtained analytically, and confirmed by numerical results. Moreover, the influence of receiver correlation is also evaluated and it is shown that considering a non-realistic PCM can lead to mistakes when comparing TAS and MIMO

On the relation between energy efficiency and spectral efficiency of multiple-antenna systems

Motivated by the increasing interest in energy-efficient communication systems, the relation between energy efficiency (EE) and spectral efficiency (SE) for multiple-input-multiple-output (MIMO) systems is investigated in this paper. To provide insights into the design of practical MIMO systems, we adopt a realistic power model and consider both independent Rayleigh fading and semicorrelated fading channels. We derived a novel and closed-form upper bound (UB) for the system EE as a function of SE. This UB exhibits great accuracy for a wide range of SE values and, thus, can be utilized for explicit assessment of the influence of SE on EE and for analytically addressing the EE optimization problems. Using this tight EE UB, our analysis unfolds two EE optimization issues: Given the number of transmit and receive antennas, an optimum value of SE is derived, such that the overall EE can be maximized, and given a specific value of SE, the optimal number of antennas is derived for maximizing the system EE

Multipair Full-Duplex Relaying with Massive Arrays and Linear Processing

We consider a multipair decode-and-forward relay channel, where multiple sources transmit simultaneously their signals to multiple destinations with the help of a full-duplex relay station. We assume that the relay station is equipped with massive arrays, while all sources and destinations have a single antenna. The relay station uses channel estimates obtained from received pilots and zero-forcing (ZF) or maximum-ratio combining/maximum-ratio transmission (MRC/MRT) to process the signals. To reduce significantly the loop interference effect, we propose two techniques: i) using a massive receive antenna array; or ii) using a massive transmit antenna array together with very low transmit power at the relay station. We derive an exact achievable rate in closed-form for MRC/MRT processing and an analytical approximation of the achievable rate for ZF processing. This approximation is very tight, especially for large number of relay station antennas. These closed-form expressions enable us to determine the regions where the full-duplex mode outperforms the half-duplex mode, as well as, to design an optimal power allocation scheme. This optimal power allocation scheme aims to maximize the energy efficiency for a given sum spectral efficiency and under peak power constraints at the relay station and sources. Numerical results verify the effectiveness of the optimal power allocation scheme. Furthermore, we show that, by doubling the number of transmit/receive antennas at the relay station, the transmit power of each source and of the relay station can be reduced by 1.5dB if the pilot power is equal to the signal power, and by 3dB if the pilot power is kept fixed, while maintaining a given quality-of-service

Achieving Large Multiplexing Gain in Distributed Antenna Systems via Cooperation with pCell Technology

In this paper we present pCellTM technology, the first commercial-grade wireless system that employs cooperation between distributed transceiver stations to create concurrent data links to multiple users in the same spectrum. First we analyze the per-user signal-to-interference-plus-noise ratio (SINR) employing a geometrical spatial channel model to define volumes in space of coherent signal around user antennas (or personal cells, i.e., pCells). Then we describe the system architecture consisting of a general-purpose-processor (GPP) based software-defined radio (SDR) wireless platform implementing a real-time LTE protocol stack to communicate with off-the-shelf LTE devices. Finally we present experimental results demonstrating up to 16 concurrent spatial channels for an aggregate average spectral efficiency of 59.3 bps/Hz in the downlink and 27.5 bps/Hz in the uplink, providing data rates of 200 Mbps downlink and 25 Mbps uplink in 5 MHz of TDD spectrum.Comment: IEEE Asilomar Conference on Signals, Systems, and Computers, Nov. 8-11th 2015, Pacific Grove, CA, US