3,256 research outputs found
Optical multiple access techniques for on-board routing
The purpose of this research contract was to design and analyze an optical multiple access system, based on Code Division Multiple Access (CDMA) techniques, for on board routing applications on a future communication satellite. The optical multiple access system was to effect the functions of a circuit switch under the control of an autonomous network controller and to serve eight (8) concurrent users at a point to point (port to port) data rate of 180 Mb/s. (At the start of this program, the bit error rate requirement (BER) was undefined, so it was treated as a design variable during the contract effort.) CDMA was selected over other multiple access techniques because it lends itself to bursty, asynchronous, concurrent communication and potentially can be implemented with off the shelf, reliable optical transceivers compatible with long term unattended operations. Temporal, temporal/spatial hybrids and single pulse per row (SPR, sometimes termed 'sonar matrices') matrix types of CDMA designs were considered. The design, analysis, and trade offs required by the statement of work selected a temporal/spatial CDMA scheme which has SPR properties as the preferred solution. This selected design can be implemented for feasibility demonstration with off the shelf components (which are identified in the bill of materials of the contract Final Report). The photonic network architecture of the selected design is based on M(8,4,4) matrix codes. The network requires eight multimode laser transmitters with laser pulses of 0.93 ns operating at 180 Mb/s and 9-13 dBm peak power, and 8 PIN diode receivers with sensitivity of -27 dBm for the 0.93 ns pulses. The wavelength is not critical, but 830 nm technology readily meets the requirements. The passive optical components of the photonic network are all multimode and off the shelf. Bit error rate (BER) computations, based on both electronic noise and intercode crosstalk, predict a raw BER of (10 exp -3) when all eight users are communicating concurrently. If better BER performance is required, then error correction codes (ECC) using near term electronic technology can be used. For example, the M(8,4,4) optical code together with Reed-Solomon (54,38,8) encoding provides a BER of better than (10 exp -11). The optical transceiver must then operate at 256 Mb/s with pulses of 0.65 ns because the 'bits' are now channel symbols
All-optical periodic code matching by a single-shot frequency-domain cross-correlation measurement
Optical single-short measurement of the cross-correlation function between
periodic sequences is demonstrated. The sequences are encoded into the
broadband ultrashort phase-shaped pulses which are mixed in the nonlinear
medium with additional amplitude-shaped narrowband pulse. The spectrum of the
resulted four wave mixing signal is measured to provide the cross-correlation
function. The high contrast between the values of cross-correlation and
auto-correlation (the latter includes also the information of the sequence
period) has potential to be employed in the optical implementation of CDMA
communication protocol
MIMO Underwater Visible Light Communications: Comprehensive Channel Study, Performance Analysis, and Multiple-Symbol Detection
In this paper, we analytically study the bit error rate (BER) performance of
underwater visible light communication (UVLC) systems with binary pulse
position modulation (BPPM). We simulate the channel fading-free impulse
response (FFIR) based on Monte Carlo numerical method to take into account the
absorption and scattering effects. Additionally, to characterize turbulence
effects, we multiply the aforementioned FFIR by a fading coefficient which for
weak oceanic turbulence can be modeled as a lognormal random variable (RV).
Moreover, to mitigate turbulence effects, we employ multiple transmitters
and/or receivers, i.e., spatial diversity technique over UVLC links.
Closed-form expressions for the system BER are provided, when equal gain
combiner (EGC) is employed at the receiver side, thanks to Gauss-Hermite
quadrature formula and approximation to the sum of lognormal RVs. We further
apply saddle-point approximation, an accurate photon-counting-based method, to
evaluate the system BER in the presence of shot noise. Both laser-based
collimated and light emitting diode (LED)-based diffusive links are
investigated. Since multiple-scattering effect of UVLC channels on the
propagating photons causes considerable inter-symbol interference (ISI),
especially for diffusive channels, we also obtain the optimum multiple-symbol
detection (MSD) algorithm to significantly alleviate ISI effects and improve
the system performance. Our numerical analysis indicates good matches between
the analytical and photon-counting results implying the negligibility of
signal-dependent shot noise, and also between analytical results and numerical
simulations confirming the accuracy of our derived closed-form expressions for
the system BER. Besides, our results show that spatial diversity significantly
mitigates fading impairments while MSD considerably alleviates ISI
deteriorations
MIMO CDMA-based Optical SATCOMs: A New Solution
A new scheme for MIMO CDMA-based optical satellite communications (OSATCOMs)
is presented. Three independent problems are described for up-link and down-
link in terms of two distinguished optimization problems. At first, in up-link,
Pulse-width optimization is proposed to reduce dispersions over fibers as the
terrestrial part. This is performed for return-to-zero (RZ) modulation that is
supposed to be used as an example in here. This is carried out by solving the
first optimization problem, while minimizing the probability of overlapping for
the Gaussian pulses that are used to produce RZ. Some constraints are assumed
such as a threshold for the peak-to-average power ratio (PAPR). In down-link,
the second and the third problems are discussed as follows, jointly as a
closed-form solution. Solving the second optimization problem, an objective
function is obtained, namely the MIMO CDMA-based satellite weight-matrix as a
conventional adaptive beam-former. The Satellite link is stablished over flat
un-correlated Nakagami-m/Suzuki fading channels as the second problem. On the
other hand, the mentioned optimization problem is robustly solved as the third
important problem, while considering inter-cell interferences in the multi-cell
scenario. Robust solution is performed due to the partial knowledge of each
cell from the others in which the link capacity is maximized. Analytical
results are conducted to investigate the merit of system.Comment: IEEE PCITC 2015 (15-17 Oct, India
Single integrated device for optical CDMA code processing in dual-code environment
We report on the design, fabrication and performance of a matching integrated optical CDMA encoder-decoder pair based on holographic Bragg reflector technology. Simultaneous encoding/decoding operation of two multiple wavelength-hopping time-spreading codes was successfully demonstrated and shown to support two error-free OCDMA links at OC-24. A double-pass scheme was employed in the devices to enable the use of longer code length
- …