4,483 research outputs found
Source Localization Using Virtual Antenna Arrays
Using antenna arrays for direction of arrival (DoA) estimation and source localization is a well-researched topic. In this paper, we analyze virtual antenna arrays for DoA estimation where the antenna array geometry is acquired using data from a low-cost inertial measurement unit (IMU). Performance evaluation of an unaided inertial navigation system with respect to individual IMU sensor noise parameters is provided using a state space based extended Kalman filter. Secondly, using Monte Carlo simulations, DoA estimation performance of random 3-D antenna arrays is evaluated by computing Cramér-Rao lower bound values for a single plane wave source located in the far field of the array. Results in the paper suggest that larger antenna arrays can provide significant gain in DoA estimation accuracy, but, noise in the rate gyroscope measurements proves to be a limiting factor when making virtual antenna arrays for DoA estimation and source localization using single antenna devices
Spatial Compressive Sensing for MIMO Radar
We study compressive sensing in the spatial domain to achieve target
localization, specifically direction of arrival (DOA), using multiple-input
multiple-output (MIMO) radar. A sparse localization framework is proposed for a
MIMO array in which transmit and receive elements are placed at random. This
allows for a dramatic reduction in the number of elements needed, while still
attaining performance comparable to that of a filled (Nyquist) array. By
leveraging properties of structured random matrices, we develop a bound on the
coherence of the resulting measurement matrix, and obtain conditions under
which the measurement matrix satisfies the so-called isotropy property. The
coherence and isotropy concepts are used to establish uniform and non-uniform
recovery guarantees within the proposed spatial compressive sensing framework.
In particular, we show that non-uniform recovery is guaranteed if the product
of the number of transmit and receive elements, MN (which is also the number of
degrees of freedom), scales with K(log(G))^2, where K is the number of targets
and G is proportional to the array aperture and determines the angle
resolution. In contrast with a filled virtual MIMO array where the product MN
scales linearly with G, the logarithmic dependence on G in the proposed
framework supports the high-resolution provided by the virtual array aperture
while using a small number of MIMO radar elements. In the numerical results we
show that, in the proposed framework, compressive sensing recovery algorithms
are capable of better performance than classical methods, such as beamforming
and MUSIC.Comment: To appear in IEEE Transactions on Signal Processin
Multi-stage Antenna Selection for Adaptive Beamforming in MIMO Arrays
Increasing the number of transmit and receive elements in
multiple-input-multiple-output (MIMO) antenna arrays imposes a substantial
increase in hardware and computational costs. We mitigate this problem by
employing a reconfigurable MIMO array where large transmit and receive arrays
are multiplexed in a smaller set of k baseband signals. We consider four stages
for the MIMO array configuration and propose four different selection
strategies to offer dimensionality reduction in post-processing and achieve
hardware cost reduction in digital signal processing (DSP) and radio-frequency
(RF) stages. We define the problem as a determinant maximization and develop a
unified formulation to decouple the joint problem and select antennas/elements
in various stages in one integrated problem. We then analyze the performance of
the proposed selection approaches and prove that, in terms of the output SINR,
a joint transmit-receive selection method performs best followed by
matched-filter, hybrid and factored selection methods. The theoretical results
are validated numerically, demonstrating that all methods allow an excellent
trade-off between performance and cost.Comment: Submitted for publicatio
Modelling Aspects of Planar Multi-Mode Antennas for Direction-of-Arrival Estimation
Multi-mode antennas are an alternative to classical antenna arrays, and hence
a promising emerging sensor technology for a vast variety of applications in
the areas of array signal processing and digital communications. An unsolved
problem is to describe the radiation pattern of multi-mode antennas in closed
analytic form based on calibration measurements or on electromagnetic field
(EMF) simulation data. As a solution, we investigate two modeling methods: One
is based on the array interpolation technique (AIT), the other one on wavefield
modeling (WM). Both methods are able to accurately interpolate quantized EMF
data of a given multi-mode antenna, in our case a planar four-port antenna
developed for the 6-8.5 GHz range. Since the modeling methods inherently depend
on parameter sets, we investigate the influence of the parameter choice on the
accuracy of both models. Furthermore, we evaluate the impact of modeling errors
for coherent maximum-likelihood direction-of-arrival (DoA) estimation given
different model parameters. Numerical results are presented for a single
polarization component. Simulations reveal that the estimation bias introduced
by model errors is subject to the chosen model parameters. Finally, we provide
optimized sets of AIT and WM parameters for the multi-mode antenna under
investigation. With these parameter sets, EMF data samples can be reproduced in
interpolated form with high angular resolution
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
- …