Supporting Internet Access and Quality of Service in Distributed Wireless Ad Hoc Networks

In this era of wireless hysteria, with continuous technological advances in wireless communication and new wireless technologies becoming standardized at a fast rate, we can expect an increased interest for wireless networks, such as ad hoc and mesh networks. These networks operate in a distributed manner, independent of any centralized device. In order to realize the practical benefits of ad hoc networks, two challenges (among others) need to be considered: distributed QoS guarantees and multi-hop Internet access. In this thesis we present conceivable solutions to both of these problems. An autonomous, stand-alone ad hoc network is useful in many cases, such as search and rescue operations and meetings where participants wish to quickly share information. However, an ad hoc network connected to the Internet is even more desirable. This is because Internet plays an important role in the daily life of many people by offering a broad range of services. In this thesis we present AODV+, which is our solution to achieve this network interconnection between a wireless ad hoc network and the wired Internet. Providing QoS in distributed wireless networks is another challenging, but yet important, task mainly because there is no central device controlling the medium access. In this thesis we propose EDCA with Resource Reservation (EDCA/RR), which is a fully distributed MAC scheme that provides QoS guarantees by allowing applications with strict QoS requirements to reserve transmission time for contention-free medium access. Our scheme is compatible with existing standards and provides both parameterized and prioritized QoS. In addition, we present the Distributed Deterministic Channel Access (DDCA) scheme, which is a multi-hop extension of EDCA/RR and can be used in wireless mesh networks. Finally, we have complemented our simulation studies with real-world ad hoc and mesh network experiments. With the experience from these experiments, we obtained a clear insight into the limitations of wireless channels. We could conclude that a wise design of the network architecture that limits the number of consecutive wireless hops may result in a wireless mesh network that is able to satisfy users’ needs. Moreover, by using QoS mechanisms like EDCA/RR or DDCA we are able to provide different priorities to traffic flows and reserve resources for the most time-critical applications

MeshScan: a Fast and Efficient Handoff Scheme for IEEE 802.11 Wireless Mesh Networks

As a next generation network solution, Wireless Mesh Networks (WMN) provides fast Internet access to a large area, which is from university campus to city scale. In order to provide an uninterrupted Internet experience to a mobile client, a process called handoff is required to maintain the network connection from one Mesh Node (MN) to another MN. Ideally, handoff should be completely transparent to mobile users. A critical application like VoIP will require a handoff capability that transfers a call from one mesh node (MN) to another in less than 50 msec. However the current IEEE 802.11 standards do not address the handoff well. Studies have revealed that standard handoff on IEEE 802.11 WLANs incurs a latency of the order of hundreds of milliseconds to several seconds. Moreover, the discovery step in the handoff process accounts for more than 99% of this latency. The study addresses the latency in the discovery step by introducing an efficient and powerful client-side scan technique called MeshScan which replaces the discovery step with a unicast scan that transmits Authentication Request frames to potential MNs. A prototype of MeshScan has been developed based on the MadWifi WLAN driver on Linux operating systems. The feasibility of MeshScan to support fast handoff in WMNs has been demonstrated through extensive computer simulations and experiments under same given conditions. The results from the simulations and experiments show that the latency associated with handoff can be reduced from seconds to a few milliseconds by using the MeshScan technique. Furthermore, it is shown that MeshScan can continue to function effectively even under heavy traffic loads

A Novel Voice Priority Queue (VPQ) Schedule and Algorithm for VoIP over WLAN Network

The VoIP deployment on Wireless Local Area Networks (WLANs), which is based on IEEE 802.11 standards, is increasing. Currently, many schedulers have been introduced such as Weighted Fair Queueing (WFQ), Strict Priority (SP) General processor sharing (GPS), Deficit Round Robin (DRR), and Contention-Aware Temporally fair Scheduling (CATS). Unfortunately, the current scheduling techniques have some drawbacks on real-time applications and therefore will not be able to handle the VoIP packets in a proper way. The objective of this research is to propose a new scheduler system model for the VoIP application named final stage of Voice Priority Queue (VPQ) scheduler. The scheduler system model is to ensure efficiency by producing a higher throughput and fairness for VoIP packets. In this paper, only the final Stage of the VPQ packet scheduler and its algorithm are presented. Simulation topologies for VoIP traffic were implemented and analyzed using the Network Simulator (NS-2). The results show that this method can achieve a better and more accurate VoIP quality throughput and fairness index over WLANs

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

Achieving Optimal Performance and Quality in LAN and WLAN for Mission-Critical Applications

© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. This is the accepted manuscript version of a conference paper which has been published in final form at https://doi.org/10.1007/978-981-99-6974-6_17Voice Over Internet Protocol (VoIP) properties are vital for its reliability in mission-critical applications. This research aims to find network topology, call signalling and voice codecs property combinations that meet reliability targets of VoIP communication in a Small Office Home Office (SOHO) environment where network resources may be limited but reliable and secured operation is essential. Local Area Network (LAN) and Wireless LAN (WLAN) scenarios are evaluated using Quality of Service (QoS) and Mean Opinion Score (MOS) measurements to find which property combinations satisfy predefined classes; best quality and best performance. The research extended Roslin et al. [1] on LAN VoIP to WLANs, and validated Khiat et al. [2] s and Guy [3]’s work that argued SIP was effective in optimal set up. This research found that VoIP combinations offer some desirable characteristics, but at the cost of other properties required, leading to categorisation being based on the interpretation of the results, concluding that though, not ideal for mission-critical applications, combinations function well in replicating real-world scenarios. The analysis also established VoIP's scalability for application-based configurations, impact of VoIP’s modularity and ease of configuration in achieving user expectations. Further property testing can solidify VoIP’s capabilities to function for mission-critical environments