Synchronising coherent networked radar using low-cost GPS-disciplined oscillators

This text evaluates the feasibility of synchronising coherent, pulsed-Doppler, networked, radars with carrier frequencies of a few gigahertz and moderate bandwidths of tens of megahertz across short baselines of a few kilometres using low-cost quartz GPSDOs based on one-way GPS time transfer. It further assesses the use of line-of-sight (LOS) phase compensation, where the direct sidelobe breakthrough is used as the phase reference, to improve the GPS-disciplined oscillator (GPSDO) synchronised bistatic Doppler performance. Coherent bistatic, multistatic, and networked radars require accurate time, frequency, and phase synchronisation. Global positioning system (GPS) synchronisation is precise, low-cost, passive and covert, and appears well-suited to synchronise networked radar. However, very few published examples exist. An imperfectly synchronised bistatic transmitter-receiver is modelled. Measures and plots are developed enabling the rapid selection of appropriate synchronisation technologies. Three low-cost, open, versatile, and extensible, quartz-based GPSDOs are designed and calibrated at zero-baselines. These GPSDOs are uniquely capable of acquiring phase-lock four times faster than conventional phase-locked loops (PLLs) and a new time synchronisation mechanism enables low-jitter sub-10 ns oneway GPS time synchronisation. In collaboration with University College London, UK, the 2.4 GHz coherent pulsed-Doppler networked radar, called NetRAD, is synchronised using the University of Cape Town developed GPSDOs. This resulted in the first published example of pulsed-Doppler phase synchronisation using GPS. A tri-static experiment is set up in Simon’s Bay, South Africa, with a maximum baseline of 2.3 km. The Roman Rock lighthouse was used as a static target to simultaneously assess the range, frequency, phase, and Doppler performance of the monostatic, bistatic, and LOS phase corrected bistatic returns. The real-world results compare well to that predicted by the earlier developed bistatic model and zero-baseline calibrations. GPS timing limits the radar bandwidth to less than 37.5 MHz when it is required to synchronise to within the range resolution. Low-cost quartz GPSDOs offer adequate frequency synchronisation to ensure a target radial velocity accuracy of better than 1 km/h and frequency drift of less than the Doppler resolution over integration periods of one second or less. LOS phase compensation, when used in combination with low-cost GPSDOs, results in near monostatic pulsed-Doppler performance with a subclutter visibility improvement of about 30 dB

Radar UAV and Bird Signature comparisons with Micro-Doppler

This chapter reviews the similarities and differences between micro Unmanned Aerial Vehicles (UAVs), also referred to as drones, and bird targets from the signals they present to radar sensors. With the increasing usage of UAV platforms in both military and civilian applications, the demand for the ability to sense drone locations and discriminate them from background clutter and non-drone targets is becoming a vital requirement. A comparable target in size, speed and Radar Cross Section (RCS) is a bird. These are present almost everywhere that radar systems have to operate and have been detected by radar since the early origin of radar engineering. Due to the similarity in radar signature birds can cause common misclassification between them and the priority drone targets which has been identified as a current key challenge in radar sensing. In this chapter radar bird and drone signature research is initially summarised, then a fundamental model that represents the key contributions from drone rotor blades is introduced and compared to real measurements. Laboratory measurements of quadcopter rotor blade signatures with across 4 linear polarisations are then investigated in order to evaluate the trend of Signal-to-Noise-Ratio (SNR) vs. aspect angle. Next bird signatures from two separate radar systems are shown and compared to drone targets also present in the captures which are of comparable size and RCS. The outputs of all research presented are then summarised in the concluding remarks

Development and performance evaluation of a multistatic radar system

Multistatic radar systems are of emerging interest as they can exploit spatial diversity, enabling improved performance and new applications. Their development is being fuelled by advances in enabling technologies in such fields as communications and Digital Signal Processing (DSP). Such systems differ from typical modern active radar systems through consisting of multiple spatially diverse transmitter and receiver sites. Due to this spatial diversity, these systems present challenges in managing their operation as well as in usefully combining the multiple sources of information to give an output to the radar operator. In this work, a novel digital Commercial Off-The-Shelf (COTS) based coherent multistatic radar system designed at University College London, named ‘NetRad’, has been developed to produce some of the first published experimental results, investigating the challenges of operating such a system, and determining what level of performance might be achievable. Full detail of the various stages involved in the combination of data from the component transmitter-receiver pairs within a multistatic system is investigated, and many of the practical issues inherent are discussed. Simulation and subsequent experimental verification of several centralised and decentralised detection algorithms in terms of localisation (resolution and parameter estimation) of targets was undertaken. The computational cost of the DSP involved in multistatic data fusion is also considered. This gave a clear demonstration of several of the benefits of multistatic radar. Resolution of multiple targets that would have been unresolvable in a conventional monostatic system was shown. Targets were also shown to be plotted as two-dimensional vector position and velocities from use of time delay and Doppler shift information only. A range of targets were used including some such as walking people which were particularly challenging due to the variability of Radar Cross Section (RCS). Performance improvements were found to be dependant on the type of multistatic radar, method of data fusion and target characteristics in question. It is likely that future work will look to further explore the optimisation of multistatic radar for the various measures of performance identified and discussed in this work

Measurement and modelling of bistatic sea clutter

There is a growing interest in bistatic radars; however, such systems cannot reach their full potential unless the designer has a proper understanding of the environment in which they operate. Rather little information has been published on bistatic clutter and out-of-plane bistatic sea clutter in particular. This is due to a number of factors including the inherent complexity of conducting bistatic radar trials and the resulting lack of high quality bistatic data. In this thesis the collection and analysis of a unique set of bistatic sea clutter data is described. To achieve this objective a novel multistatic radar system was developed. The nodes do not need to be physically connected. This system has a peak transmitted power of more than 500 W. Synchronisation in time and frequency was achieved using GPS disciplined oscillators built and designed at the University of Cape Town. Using the above system simultaneous bistatic and monostatic sea clutter and target signatures were recorded in the UK and South Africa at various geometries and weather conditions. Parts of this unique data set related to out-of-plane bistatic sea clutter was analysed in this thesis. The data covered both co- and cross-polarised sea clutter data at low grazing angles with bistatic angles between 30° and 120°. Data sets covering a range of conditions with sea states from 2 – 5. Using the recorded data it was shown that the ratio of the bistatic normalised radar cross section to the monostatic normalised radar cross section dropped as the scattering angle was increased until the scattering angle was around 90°. Furthermore, the cross-polarised bistatic normalised radar cross section was found to be larger than the cross-polarised monostatic normalised radar cross section when the scattering angle was around 90°. A new empirical model for predicting bistatic normalised radar cross section has been developed. The model is applicable to both in-plane and out-of-plane geometries. The model was able to provide a good fit to both UCL and external data. The temporal correlation properties of both monostatic and bistatic data were studied. It was found that the speckle component of both bistatic and monostatic clutter decorrelated in tens of milliseconds, with the decorrelation time longer for bistatic clutter. The texture of both bistatic and monostatic clutter had similar autocorrelation functions and had similar decorrelation times. By comparing the texture and intensity autocorrelation functions it was concluded that the compound model still holds. It was also found that bistatic clutter was less ‘spiky’ than monostatic clutter particularly at horizontal polarisation. This was due to the reduction in the intensity of the spikes due to specular reflections. By combing the effects of the reduction in reflectivity and spikiness it was shown that a bistatic radar would require a smaller signal to interference ratio than a monostatic radar for the same probability of detection and probability of false alarm. This was more evident at angles close to 90° and for horizontal polarisation. In summary this thesis reports the collection and analysis of novel simultaneous monostatic and bistatic sea clutter and target data. This was achieved by the development of a unique multistatic radar system. This work has resulted in significant advances in both netted radar technology and understanding of bistatic sea clutter

Time and Frequency Transfer in a Coherent Multistatic Radar using a White Rabbit Network

Networks of coherent multistatic radars require accurate and stable time and frequency transfer (TFT) for range and Doppler estimation. TFT techniques based on global navigation satellite systems (GNSS), have been favoured for several reasons, such as enabling node mobility through wireless operation, geospatial referencing, and atomic clock level time and frequency stability. However, such systems are liable to GNSS-denial, where the GNSS carrier is temporarily or permanently removed. A denial-resilient system should consider alternative TFT techniques, such as the White Rabbit (WR) project. WR is an Ethernet based protocol, that is able to synchronise thousands of nodes on a fibre-optic based network with sub-nanosecond accuracy and picoseconds of jitter. This thesis evaluates WR as the TFT network for a coherent multistatic pulse-Doppler radar – NeXtRAD. To test the hypothesis that WR is suitable for TFT in a coherent multistatic radar, the time and frequency performance of a WR network was evaluated under laboratory conditions, comparing the results against a network of multi-channel GPS-disciplined oscillators (GPSDO). A WR-disciplined oscillator (WRDO) is introduced, which has the short-term stability of an ovenised crystal (OCXO), and long-term stability of the WR network. The radar references were measured using a dual mixer time difference technique (DMTD), which allows the phase to be measured with femtosecond level resolution. All references achieved the stringent time and frequency requirements for short-term coherent bistatic operation, however the GPSDOs and WRDOs had the best short-term frequency stability. The GPSDOs had the highest amount of long-term phase drift, with a peak-peak time error of 9.6 ns, whilst the WRDOs were typically stable to within 0.4 ns, but encountered transient phase excursions to 1.5 ns. The TFT networks were then used on the NeXtRAD radar, where a lighthouse, Roman Rock, was used as a static target to evaluate the time and frequency performance of the references on a real system. The results conform well to the laboratory measurements, and therefore, WR can be used for TFT in coherent radar

A scalable real-time processing chain for radar exploiting illuminators of opportunity

Includes bibliographical references.This thesis details the design of a processing chain and system software for a commensal radar system, that is, a radar that makes use of illuminators of opportunity to provide the transmitted waveform. The stages of data acquisition from receiver back-end, direct path interference and clutter suppression, range/Doppler processing and target detection are described and targeted to general purpose commercial off-the-shelf computing hardware. A detailed low level design of such a processing chain for commensal radar which includes both processing stages and processing stage interactions has, to date, not been presented in the Literature. Furthermore, a novel deployment configuration for a networked multi-site FM broadcast band commensal radar system is presented in which the reference and surveillance channels are record at separate locations