Estimation of rotor position for permanent magnet synchronous motor at standstill using sensorless voltage control scheme

The zero-speed rotor position estimation in surface mounted permanent magnet synchronous motor SM-PMSM represents a challenge due to the weak magnetic saliency in this type of motors. This paper presents a new method to estimate the initial rotor position of SM-PMSMs more simply and more accurately without any form of position or current sensors. It achieves this goal through an injection of three short width pulses and employing only the measurements of the motor terminal voltage responses, which fluctuate sinusoidally with the rotor position. Thereby, memory addresses, or dimensions of a look-up table, were created from the readings of the measured voltages. The memory was primarily loaded with 360 angles, each represents 1o angle of rotor positions. The simulated MATLAB model and experimental results demonstrate the advantages. Comparing with the previous related publications, this research work has fulfilled two main contributions. The first is in achieving a rotor position estimation of 1o resolution. The second is in eliminating the technique needed for detection of the rotor magnet polarity. The measured rates of error for the MATLAB model and the practical model were 2% and 5% respectivel

A New Position and Speed Estimation Scheme for Position Control of PMSM Drives Using Low-Resolution Position Sensors

A new position control method for permanent magnet synchronous motor (PMSM) drive with a low-resolution encoder is proposed in this paper. Three binary Hall position sensors are utilized to realize a moderate-performance position control system for the consideration of economy and simplicity in servo application. Compared with sensorless control, the usage of binary Hall position sensors is a guarantee of both control performance and low cost. However, the low resolution of the Hall sensor will heavily deteriorate the accuracy of the position and speed calculation. Such drawback can be effectively minimized by using appropriate position and speed estimation schemes. With the help of polynomial fitting and state observer techniques, a solution is provided to realize semi-closed loop control by treating the position and speed estimators as separate systems. The performance can be improved (1) by proposing a polynomial fitting scheme with least squares method, high-resolution rotor-position predictor can be derived by fitting the predefined position data from binary Hall position sensors in a linear or quadratic manner; (2) by adopting the dual-sampling-rate observer, instantaneous speed can be estimated at each control cycle and the estimation error is corrected once a new measurement form the Hall arrives. Furthermore, a nonlinear position control algorithm is introduced to increase standstill stability. Extensive experimental results are given to demonstrate the feasibility of the proposed method and its superiority over conventional methods

Robust fault tolerant control of induction motor system

Research into fault tolerant control (FTC, a set of techniques that are developed to increase plant availability and reduce the risk of safety hazards) for induction motors is motivated by practical concerns including the need for enhanced reliability, improved maintenance operations and reduced cost. Its aim is to prevent that simple faults develop into serious failure. Although, the subject of induction motor control is well known, the main topics in the literature are concerned with scalar and vector control and structural stability. However, induction machines experience various fault scenarios and to meet the above requirements FTC strategies based on existing or more advanced control methods become desirable. Some earlier studies on FTC have addressed particular problems of 3-phase sensor current/voltage FTC, torque FTC, etc. However, the development of these methods lacks a more general understanding of the overall problem of FTC for an induction motor based on a true fault classification of possible fault types.In order to develop a more general approach to FTC for induction motors, i.e. not just designing specific control approaches for individual induction motor fault scenarios, this thesis has carried out a systematic research on induction motor systems considering the various faults that can typically be present, having either “additive” fault or “multiplicative” effects on the system dynamics, according to whether the faults are sensor or actuator (additive fault) types or component or motor faults (multiplicative fault) types.To achieve the required objectives, an active approach to FTC is used, making use of fault estimation (FE, an approach that determine the magnitude of a fault signal online) and fault compensation. This approach of FTC/FE considers an integration of the electrical and mechanical dynamics, initially using adaptive and/or sliding mode observers, Linear Parameter Varying (LPV, in which nonlinear systems are locally decomposed into several linear systems scheduled by varying parameters) and then using back-stepping control combined with observer/estimation methods for handling certain forms of nonlinearity.In conclusion, the thesis proposed an integrated research of induction motor FTC/FE with the consideration of different types of faults and different types of uncertainties, and validated the approaches through simulations and experiments

Prädiktive Regelung und Finite-Set-Beobachter für Windgeneratoren mit variabler Drehgeschwindigkeit

This dissertation presents several model predictive control (MPC) techniques and finite-position-set observers (FPSOs) for permanent-magnet synchronous generators and doubly-fed induction generators in variable-speed wind turbines. The proposed FPSOs are novel ones and based on the concept of finite-control-set MPC. Then, the problems of the MPC techniques like sensitivity to variations of the model parameters and others are investigated and solved in this work.Die vorliegende Dissertation stellt mehrere unterschiedliche Verfahren der modellprädiktiven Regelung (MPC) und so genannte Finite-Position-Set-Beobachter (FPSO) sowohl für Synchrongeneratoren mit Permanentmagneterregung als auch für doppelt gespeiste Asynchrongeneratoren in Windkraftanlagen mit variabler Drehzahl vor und untersucht diese. Für die Beobachter (FPSO) wird ein neuartiger Ansatz vorgestellt, der auf dem Konzept der Finite-Control-Set-MPC basiert. Außerdem werden typische Eigenschaften der MPC wie beispielsweise die Anfälligkeit gegenüber Parameterschwankungen untersucht und kompensiert

Modelling and practical set-up to investigate the performance of permanent magnet synchronous motor through rotor position estimation at zero and low speeds

This thesis provides a study for the rotor position estimation in SM-PMSMs, particularly at zero and low speeds. The method for zero rotor speed is based on injection of three high frequency voltage pulses in the motor stator windings. Then, the voltage responses at the motor terminals are exploited to extract the rotor position. Two approaches, modelling and practical implementations, are presented. The obtained results have showed a verification of a high-resolution position estimation (a position estimation of 1 degree angle), a simplicity and cost effective implementation and a no need for current sensors is required to achieve the estimation process. It should be noticed that the implementation of rotor position estimation at zero speed is only attended when the rotor is at standstill or very low speed. Therefore, the motor driver is not expected to be active at this condition. Thereby, the zero speed estimation does not provide a robust torque control. In future, this should be taking into consideration to overcome this drawback and to make the estimator more reliable. At low speed running, the primary goal is to start spinning the under test motors, and then the rotor position estimation is achieved. The motor spinning is based on adopting a virtual injected signal to generate the voltage components, Vα and Vβ, of the space vector pulse width modulation technique. Then, generating the eight space vectors is conducted through storing the standard patterns of the six space vector sectors in a memory structure together with the timing sequences of each sector. The presented strategy of motor running includes a proposed motor speed control scheme, which is based on controlling the frequency of the power signal, at the inverter output, through controlling the timing period of execution the power delivery program. The thesis presents a proposed method to achieve the estimation goal depends on tracking the magnetic saliency on one motor line voltage. Thereby, the rotor position estimation The introduced proposed method, for rotor position estimation at zero speed, verifies the following contributions: - Presents a simple and cost effective zero speed rotor position estimator for the motor under test. - The aimed resolution in this thesis is an angle 1 degree. IV - Adopting solely the measuring of motor terminal voltages. Eliminating the detection of the rotor magnet polarity as a necessary technique for completing the position estimation. At low speed running, the following contributions are verified: - Rather than a real frequency signal, a virtual injected signal is adopted to generate the voltage components, Vα and Vβ of the space vector pulse width modulation technique. - The proposed method for generating the eight space vectors is based on storing the standard patterns of the six sectors in a memory structure together with the timing sequence. - The strategy of motor speed control is based on controlling the period of execution the power delivery program. - The strategy of low speed rotor position employs one motor line voltage from which the low speed estimation is achieved