Self-interference in Multi-tap Channels for Full-Duplex Wireless Systems

Residual self-interference (SI) is primarily a key challenge when designing In-Band Full-duplex (IBFDX) wireless systems. Channel estimation errors are one of the major causes of residual SI. Consequently, a deeper understanding of the impact of the channel effects on the residual SI becomes indispensable. In this paper, we investigate the influence of multiple taps on the residual SI power of IBFDX systems. We first formulate the effect of having independent taps on the residual SI power mathematically. The derivations take into account the amount of interference cancellation on each tap by considering phase and amplitude estimation coefficients. We conclude that the increase in the number of taps always leads to an additive effect of the residual power. Such findings are shown mathematically and also reported in different results obtained by simulation. Finally, we compare the distribution of the residual SI power with different known distributions, concluding that Weibull and Gamma distributions are the closest ones in terms of accuracy. In-Band Full-Duplex communication Residual self-interference Independent fading taps channel.authorsversionpublishe

Joint Design of Multi-Tap Analog Cancellation and Digital Beamforming for Reduced Complexity Full Duplex MIMO Systems

Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller scales with the number of transmit and receive antennas, thus exploiting the benefits of analog cancellation becomes impractical for full duplex MIMO transceivers. In this paper, we present a novel architecture for the analog canceller comprising of reduced number of taps (tap refers to a line of fixed delay and variable phase shifter and attenuator) and simple multiplexers for efficient signal routing among the transmit and receive radio frequency chains. In contrast to the available analog cancellation architectures, the values for each tap and the configuration of the multiplexers are jointly designed with the digital beamforming filters according to certain performance objectives. Focusing on a narrowband flat fading channel model as an example, we present a general optimization framework for the joint design of analog cancellation and digital beamforming. We also detail a particular optimization objective together with its derived solution for the latter architectural components. Representative computer simulation results demonstrate the superiority of the proposed low complexity full duplex MIMO system over lately available ones.Comment: 8 pages, 4 figures, IEEE ICC 201

Multi-tap Digital Canceller for Full-Duplex Applications

We identify phase noise as a bottleneck for the performance of digital self-interference cancellers that utilize a single auxiliary receiver---single-tap digital cancellers---and operate in multipath propagation environments. Our analysis demonstrates that the degradation due to phase noise is caused by a mismatch between the analog delay of the auxiliary receiver and the different delays of the multipath components of the self-interference signal. We propose a novel multi-tap digital self-interference canceller architecture that is based on multiple auxiliary receivers and a customized Normalized-Least-Mean-Squared (NLMS) filtering for self-interference regeneration. Our simulation results demonstrate that our proposed architecture is more robust to phase noise impairments and can in some cases achieve 10~dB larger self-interference cancellation than the single-tap architecture.Comment: SPAWC 201