1,195 research outputs found
Secure beamforming transmission with limited training and feedback
We consider the secure beamforming transmission over a quasi-static block fading channel from a multi-antenna transmitter to a desired single-antenna receiver, in the presence of a passive single-antenna eavesdropper. We focus on a practical scenario where the transmitter can only acquire the statistical channel knowledge of the eavesdropper and the partial channel knowledge of the legitimate receiver through a finite amount of signaling overhead. To keep control of the outage events caused by the limited channel knowledge, We firstly propose a strategy to determine the wiretap code parameters under the outage constraints, based on which we establish a necessary transmission condition to guarantee a positive secrecy rate. Aided by this transmission condition, we propose an on-off-based transmission scheme and characterize the secrecy throughput performance of the system. Our designed transmission scheme is beneficial for the deployment of physical layer security in practical frequency division duplex (FDD) systems with limited training and feedback.ARC Discovery Projects Grant DP15010390
Artificial-Noise-Aided Secure Multi-Antenna Transmission with Limited Feedback
We present an optimized secure multi-antenna transmission approach based on
artificial-noise-aided beamforming, with limited feedback from a desired
single-antenna receiver. To deal with beamformer quantization errors as well as
unknown eavesdropper channel characteristics, our approach is aimed at
maximizing throughput under dual performance constraints - a connection outage
constraint on the desired communication channel and a secrecy outage constraint
to guard against eavesdropping. We propose an adaptive transmission strategy
that judiciously selects the wiretap coding parameters, as well as the power
allocation between the artificial noise and the information signal. This
optimized solution reveals several important differences with respect to
solutions designed previously under the assumption of perfect feedback. We also
investigate the problem of how to most efficiently utilize the feedback bits.
The simulation results indicate that a good design strategy is to use
approximately 20% of these bits to quantize the channel gain information, with
the remainder to quantize the channel direction, and this allocation is largely
insensitive to the secrecy outage constraint imposed. In addition, we find that
8 feedback bits per transmit antenna is sufficient to achieve approximately 90%
of the throughput attainable with perfect feedback.Comment: to appear in IEEE Transactions on Wireless Communication
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead
Physical layer security which safeguards data confidentiality based on the
information-theoretic approaches has received significant research interest
recently. The key idea behind physical layer security is to utilize the
intrinsic randomness of the transmission channel to guarantee the security in
physical layer. The evolution towards 5G wireless communications poses new
challenges for physical layer security research. This paper provides a latest
survey of the physical layer security research on various promising 5G
technologies, including physical layer security coding, massive multiple-input
multiple-output, millimeter wave communications, heterogeneous networks,
non-orthogonal multiple access, full duplex technology, etc. Technical
challenges which remain unresolved at the time of writing are summarized and
the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication
Beamforming Techniques for Non-Orthogonal Multiple Access in 5G Cellular Networks
In this paper, we develop various beamforming techniques for downlink
transmission for multiple-input single-output (MISO) non-orthogonal multiple
access (NOMA) systems. First, a beamforming approach with perfect channel state
information (CSI) is investigated to provide the required quality of service
(QoS) for all users. Taylor series approximation and semidefinite relaxation
(SDR) techniques are employed to reformulate the original non-convex power
minimization problem to a tractable one. Further, a fairness-based beamforming
approach is proposed through a max-min formulation to maintain fairness between
users. Next, we consider a robust scheme by incorporating channel
uncertainties, where the transmit power is minimized while satisfying the
outage probability requirement at each user. Through exploiting the SDR
approach, the original non-convex problem is reformulated in a linear matrix
inequality (LMI) form to obtain the optimal solution. Numerical results
demonstrate that the robust scheme can achieve better performance compared to
the non-robust scheme in terms of the rate satisfaction ratio. Further,
simulation results confirm that NOMA consumes a little over half transmit power
needed by OMA for the same data rate requirements. Hence, NOMA has the
potential to significantly improve the system performance in terms of transmit
power consumption in future 5G networks and beyond.Comment: accepted to publish in IEEE Transactions on Vehicular Technolog
- …