46,187 research outputs found
Recommended from our members
EcoBlock: Grid Impacts, Scaling, and Resilience
Widespread deployment of EcoBlocks has the potential to transform today's electricity system into one that is more resilient, flexible, efficient and sustainable. In this vision, the system will consist of self- su cient, renewable-powered, block-scale entities that can deliberately adjust their net power exchange and can optimize performance, maintain stability, support each other, or disconnect entirely from the grid as needed. This report is intended as an independent analysis of the potential relationships, both constructive and adverse, between EcoBlocks and the grid
Grid integration of intermittent renewable energy sources using price-responsive plug-in electric vehicles
Plug-in electric vehicles (PEVs) are expected to balance the fluctuation of re-newable energy sources (RES). To investigate the contribution of PEVs, the availability of mobile battery storage and the control mechanism for load man-agement are crucial. This study therefore combined the following: a stochastic model to determine mobility behavior, an optimization model to minimize vehicle charging costs and an agent-based electricity market equilibrium model to esti-mate variable electricity prices. The variable electricity prices are calculated based on marginal generation costs. Hence, because of the merit order effect, the electricity prices provide incentives to consume electricity when the supply of renewable generation is high. Depending on the price signals and mobility behavior, PEVs calculate a cost minimizing charging schedule and therefore balance the fluctuation of RES. The analysis shows that it is possible to limit the peak load using the applied control mechanism. The contribution of PEVs to improving the integration of intermittent renewable power generation into the grid depends on the characteristic of the RES generation profile. For the Ger-man 2030 scenario used here, the negative residual load was reduced by 15 to 22 percent and the additional consumption of negative residual load was be-tween 34 and 52 percent. --Plug-in electric vehicles,demand-side management,variable prices,intermittent generation
Load Balancing with Energy Storage Systems Based on Co-Simulation of Multiple Smart Buildings and Distribution Networks
In this paper, we present a co-simulation framework that combines two main simulation tools, one that provides detailed multiple building energy simulation ability with Energy-Plus being the core engine, and the other one that is a distribution level simulator, Matpower. Such a framework can be used to develop and study district level optimization techniques that exploit the interaction between a smart electric grid and buildings as well as the interaction between buildings themselves to achieve energy and cost savings and better energy management beyond what one can achieve through techniques applied at the building level only. We propose a heuristic algorithm to do load balancing in distribution networks affected by service restoration activities. Balancing is achieved through the use of utility directed usage of battery energy storage systems (BESS). This is achieved through demand response (DR) type signals that the utility communicates to individual buildings. We report simulation results on two test cases constructed with a 9-bus distribution network and a 57-bus distribution network, respectively. We apply the proposed balancing heuristic and show how energy storage systems can be used for temporary relief of impacted networks
An Extended Mean Field Game for Storage in Smart Grids
We consider a stylized model for a power network with distributed local power
generation and storage. This system is modeled as network connection a large
number of nodes, where each node is characterized by a local electricity
consumption, has a local electricity production (e.g. photovoltaic panels), and
manages a local storage device. Depending on its instantaneous consumption and
production rates as well as its storage management decision, each node may
either buy or sell electricity, impacting the electricity spot price. The
objective at each node is to minimize energy and storage costs by optimally
controlling the storage device. In a non-cooperative game setting, we are led
to the analysis of a non-zero sum stochastic game with players where the
interaction takes place through the spot price mechanism. For an infinite
number of agents, our model corresponds to an Extended Mean-Field Game (EMFG).
In a linear quadratic setting, we obtain and explicit solution to the EMFG, we
show that it provides an approximate Nash-equilibrium for -player game, and
we compare this solution to the optimal strategy of a central planner.Comment: 27 pages, 5 figures. arXiv admin note: text overlap with
arXiv:1607.02130 by other author
Recommended from our members
The role of large-scale energy storage design and dispatch in the power grid: A study of very high grid penetration of variable renewable resources
We present a result of hourly simulation performed using hourly load data and the corresponding simulated output of wind and solar technologies distributed throughout the state of California. We examined how we could achieve very high-energy penetration from intermittent renewable system into the electricity grid. This study shows that the maximum threshold for the storage need is significantly less than the daily average demand. In the present study, we found that the approximate network energy storage is of the order of 186. GW. h/22. GW (approximately 22% of the average daily demands of California). Allowing energy dumping was shown to increase storage use, and by that way, increases grid penetration and reduces the required backup conventional capacity requirements. Using the 186. GW. h/22. GW storage and at 20% total energy loss, grid penetration was increased to approximately 85% of the annual demand of the year while also reducing the conventional backup capacity requirement to 35. GW. This capacity was sufficient to supply the year round hourly demand, including 59 GW peak demand, plus a distribution loss of about 5.3%. We conclude that designing an efficient and least cost grid may require the capability to capture diverse physical and operational policy scenarios of the future grid. © 2014 Elsevier Ltd
Submodular Load Clustering with Robust Principal Component Analysis
Traditional load analysis is facing challenges with the new electricity usage
patterns due to demand response as well as increasing deployment of distributed
generations, including photovoltaics (PV), electric vehicles (EV), and energy
storage systems (ESS). At the transmission system, despite of irregular load
behaviors at different areas, highly aggregated load shapes still share similar
characteristics. Load clustering is to discover such intrinsic patterns and
provide useful information to other load applications, such as load forecasting
and load modeling. This paper proposes an efficient submodular load clustering
method for transmission-level load areas. Robust principal component analysis
(R-PCA) firstly decomposes the annual load profiles into low-rank components
and sparse components to extract key features. A novel submodular cluster
center selection technique is then applied to determine the optimal cluster
centers through constructed similarity graph. Following the selection results,
load areas are efficiently assigned to different clusters for further load
analysis and applications. Numerical results obtained from PJM load demonstrate
the effectiveness of the proposed approach.Comment: Accepted by 2019 IEEE PES General Meeting, Atlanta, G
ASCR/HEP Exascale Requirements Review Report
This draft report summarizes and details the findings, results, and
recommendations derived from the ASCR/HEP Exascale Requirements Review meeting
held in June, 2015. The main conclusions are as follows. 1) Larger, more
capable computing and data facilities are needed to support HEP science goals
in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of
the demand at the 2025 timescale is at least two orders of magnitude -- and in
some cases greater -- than that available currently. 2) The growth rate of data
produced by simulations is overwhelming the current ability, of both facilities
and researchers, to store and analyze it. Additional resources and new
techniques for data analysis are urgently needed. 3) Data rates and volumes
from HEP experimental facilities are also straining the ability to store and
analyze large and complex data volumes. Appropriately configured
leadership-class facilities can play a transformational role in enabling
scientific discovery from these datasets. 4) A close integration of HPC
simulation and data analysis will aid greatly in interpreting results from HEP
experiments. Such an integration will minimize data movement and facilitate
interdependent workflows. 5) Long-range planning between HEP and ASCR will be
required to meet HEP's research needs. To best use ASCR HPC resources the
experimental HEP program needs a) an established long-term plan for access to
ASCR computational and data resources, b) an ability to map workflows onto HPC
resources, c) the ability for ASCR facilities to accommodate workflows run by
collaborations that can have thousands of individual members, d) to transition
codes to the next-generation HPC platforms that will be available at ASCR
facilities, e) to build up and train a workforce capable of developing and
using simulations and analysis to support HEP scientific research on
next-generation systems.Comment: 77 pages, 13 Figures; draft report, subject to further revisio
Recommended from our members
Distribution System Voltage Management and Optimization for Integration of Renewables and Electric Vehicles: Research Gap Analysis
California is striving to achieve 33% renewable penetration by 2020 in accordance with the stateâs Renewable Portfolio Standard (RPS). The behavior of renewable resources and electric vehicles in distribution systems is creating constraints on the penetration of these resources into the distribution system. One such constraint is the ability of present-Âââday voltage management methodologies to maintain proper distribution system voltage profiles in the face of higher penetrations of PV and electric vehicle technologies. This white paper describes the research gaps that have been identified in current Volt/VAR Optimization and Control (VVOC) technologies, the emerging technologies which are becoming available for use in VVOC, and the research gaps which exist and must be overcome in order to realize the full promise of these emerging technologies
- âŠ