154 research outputs found

    A framework for fine-grain synthesis optimization of operational amplifiers

    Get PDF
    This thesis presents a cell-level framework for Operational Amplifiers Synthesis (OASYN) coupling both circuit design and layout. For circuit design, the tool applies a corner-driven optimization, accounting for on-chip performance variations. By exploring the process, voltage, and temperature variations space, the tool extracts design worst case solution. The tool undergoes sensitivity analysis along with Pareto-optimality to achieve required specifications. For layout phase, OASYN generates a DRC proved automated layout based on a sized circuit-level description. Morata et al. (1996) introduced an elegant representation of block placement called sequence pair for general floorplans (SP). Like TCG and BSG, but unlike O-tree, B*tree, and CBL, SP is P-admissible. Unlike SP, TCG supports incremental update during operation and keeps the information of the boundary modules as well as their relative positions in the representation. Block placement algorithms that are based on SP use heuristic optimization algorithms, e.g., simulated annealing where generation of large number of sequence pairs are required. Therefore a fast algorithm is needed to generate sequence pairs after each solution perturbation. The thesis presents a new simple and efficient O(n) runtime algorithm for fast realization of incremental update for cost evaluation. The algorithm integrates sequence pair and transitive closure graph advantages into TCG-S* a superior topology update scheme which facilitates the search for optimum desired floorplan. Experiments show that TCG-S* is better than existing works in terms of area utilization and convergence speed. Routing-aware placement is implemented in OASYN, handling symmetry constraints, e.g., interdigitization, common centroid, along with congestion elimination and the enhancement of placement routability

    Beyond the arithmetic constraint: depth-optimal mapping of logic chains in reconfigurable fabrics

    Get PDF
    Look-up table based FPGAs have migrated from a niche technology for design prototyping to a valuable end-product component and, in some cases, a replacement for general purpose processors and ASICs alike. One way architects have bridged the performance gap between FPGAs and ASICs is through the inclusion of specialized components such as multipliers, RAM modules, and microcontrollers. Another dedicated structure that has become standard in reconfigurable fabrics is the arithmetic carry chain. Currently, it is only used to map arithmetic operations as identified by HDL macros. For non-arithmetic operations, it is an idle but potentially powerful resource.;Obstacles to using the carry chain for generic logic operations include lack of architectural and computer-aided design support. Current carry-select architectures facilitate carry chain reuse, although they do so only for (K-1)-input operations. Additionally, hardware description language (HDL) macros are the only recourse for a designer wishing to map generic logic chains in a carry-select architecture. A novel architecture that allows the full K-input operational capacity of the carry chain to be harnessed is presented as a solution to current architectural limitations. It is shown to have negligible impact on logic element area and delay. Using only two additional 2:1 pass transistor multiplexers, it enables the transmission of a K-input operation to the carry chain and general routing simultaneously. To successfully identify logic chains in an arbitrary Boolean network, ChainMap is presented as a novel technology mapping algorithm. ChainMap creates delay-optimal generic logic chains in polynomial time without HDL macros. It maps both arithmetic and non-arithmetic logic chains whenever depth increasing nodes, which increase logic depth but not routing depth, are encountered. Use of the chain is not reserved for arithmetic, but rather any set of gates exhibiting similar characteristics. By using the carry chain as a generic, near zero-delay adjacent cell interconnection structure a potential average optimal speedup of 1.4x is revealed. Post place and route experiments indicate that ChainMap solutions perform similarly to HDL chains when cluster resources are abundant and significantly better in cluster-constrained arrays

    A predictive distributed congestion metric with application to technology mapping

    Full text link

    Throughput-driven floorplanning with wire pipelining

    Get PDF
    The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires

    Simultaneous timing driven clustering and placement for FPGAs

    Get PDF
    Abstract. Traditional placement algorithms for FPGAs are normally carried out on a fixed clustering solution of a circuit. The impact of clustering on wirelength and delay of the placement solutions is not well quantified. In this paper, we present an algorithm named SCPlace that performs simultaneous clustering and placement to minimize both the total wirelength and longest path delay. We also incorporate a recently proposed path counting-based net weighting schem

    A survey of DA techniques for PLD and FPGA based systems

    Full text link
    Programmable logic devices (PLDs) are gaining in acceptance, of late, for designing systems of all complexities ranging from glue logic to special purpose parallel machines. Higher densities and integration levels are made possible by the new breed of complex PLDs and FPGAs. The added complexities of these devices make automatic computer aided tools indispensable for achieving good performance and a high usable gate-count. In this article, we attempt to present in an unified manner, the different tools and their underlying algorithms using an example of a vending machine controller as an illustrative example. Topics covered include logic synthesis for PLDs and FPGAs along with an in-depth survey of important technology mapping, partitioning and place and route algorithms for different FPGA architectures.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31206/1/0000108.pd

    Guarded Evaluation: An Algorithm for Dynamic Power Reduction in FPGAs

    Get PDF
    Guarded evaluation is a power reduction technique that involves identifying sub-circuits (within a larger circuit) whose inputs can be held constant (guarded) at specific times during circuit operation, thereby reducing switching activity and lowering dynamic power. The concept is rooted in the property that under certain conditions, some signals within digital designs are not "observable" at design outputs, making the circuitry that generates such signals a candidate for guarding. Guarded evaluation has been demonstrated successfully for custom ASICs; in this work, we apply the technique to FPGAs. In ASICs, guarded evaluation entails adding additional hardware to the design, increasing silicon area and cost. Here, we apply the technique in a way that imposes minimal area overhead by leveraging existing unused circuitry within the FPGA. The LUT functionality is modified to incorporate the guards and reduce toggle rates. The primary challenge in guarded evaluation is in determining the specific conditions under which a sub-circuit's inputs can be held constant without impacting the larger circuit's functional correctness. We propose a simple solution to this problem based on discovering gating inputs using "non-inverting paths" and trimming inputs using "partial non-inverting paths" in the circuit's AND-Inverter graph representation. Experimental results show that guarded evaluation can reduce switching activity by as much as 32% for FPGAs with 6-LUT architectures and 25% for 4-LUT architectures, on average, and can reduce power consumption in the FPGA interconnect by 29% for 6-LUTs and 27% for 4-LUTs. A clustered architecture with four LUTs to a cluster and ten LUTs to a cluster produced the best power reduction results. We implement guarded evaluation at various stages of the FPGA CAD flow and analyze the reductions. We implement the algorithm as post technology mapping, post packing and post placement optimizations. Guarded Evaluation as a post technology mapping algorithm inserted the most number of guards and hence achieved the highest activity and interconnect reduction. However, guarding signals come with a cost of increased fanout and stress on routing resources. Packing and placement provides the algorithm with additional information of the circuit which is leveraged to insert high quality guards with minimal impact on routing. Experimental results show that post-packing and post-placement methods have comparable reductions to post-mapping with considerably lesser impact on the critical path delay and routability of the circuit

    Design Methodologies and Architecture Solutions for High-Performance Interconnects

    Get PDF
    ABSTRACT In Deep Sub-Micron (DSM) technologies, interconnects play a crucial role in the correct functionality and largely impact the performance of complex System-on-Chip (SoC) designs. For technologies of 0.25µm and below, wiring capacitance dominates gate capacitance, thus rapidly increasing the interconnect-induced delay. Moreover, the coupling capacitance becomes a significant portion of the on-chip total wiring capacitance, and coupling between adjacent wires cannot be considered as a second-order effect any longer. As a consequence, the traditional top-down design methodology is ineffective, since the actual wiring delays can be computed only after layout parasitic extraction, when the physical design is completed. Fixing all the timing violations often requires several time-consuming iterations of logical and physical design, and it is essentially a trial-and-error approach. Increasingly tighter time-to-market requirements dictate that interconnect parasitics must be taken into account during all phases of the design flow, at different level of abstractions. However, given the aggressive technology scaling trends and the growing design complexity, this approach will only temporarily ameliorate the interconnect problem. We believe that in order to achieve gigascale designs in the nanometer regime, a novel design paradigm, based on new forms of regularity and newly created IP (Intellectual Property) blocks must be developed, to provide a direct path from system-level architectural exploration to physical implementation
    corecore