29,654 research outputs found
Joint QoS multicast routing and channel assignment in multiradio multichannel wireless mesh networks using intelligent computational methods
Copyright @ 2010 Elsevier B.V. All rights reserved.In this paper, the quality of service multicast routing and channel assignment (QoS-MRCA) problem is investigated. It is proved to be a NP-hard problem. Previous work separates the multicast tree construction from the channel assignment. Therefore they bear severe drawback, that is, channel assignment cannot work well with the determined multicast tree. In this paper, we integrate them together and solve it by intelligent computational methods. First, we develop a unified framework which consists of the problem formulation, the solution representation, the fitness function, and the channel assignment algorithm. Then, we propose three separate algorithms based on three representative intelligent computational methods (i.e., genetic algorithm, simulated annealing, and tabu search). These three algorithms aim to search minimum-interference multicast trees which also satisfy the end-to-end delay constraint and optimize the usage of the scarce radio network resource in wireless mesh networks. To achieve this goal, the optimization techniques based on state of the art genetic algorithm and the techniques to control the annealing process and the tabu search procedure are well developed separately. Simulation results show that the proposed three intelligent computational methods based multicast algorithms all achieve better performance in terms of both the total channel conflict and the tree cost than those comparative references.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1
Multiple-antenna-aided OFDM employing genetic-algorithm-assisted minimum bit error rate multiuser detection
The family of minimum bit error rate (MBER) multiuser detectors (MUD) is capable of outperforming the classic minimum mean-squared error (MMSE) MUD in terms of the achievable bit-error rate (BER) owing to directly minimizing the BER cost function. In this paper,wewill invoke genetic algorithms (GAs) for finding the optimum weight vectors of the MBER MUD in the context of multiple-antenna-aided multiuser orthogonal frequency division multiplexing (OFDM) .We will also show that the MBER MUD is capable of supporting more users than the number of receiver antennas available, while outperforming the MMSE MUD
Recommended from our members
Optimized multi-objective design of herringbone micromixers
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.A design method which systematically integrates Computational Fluids Dynamics (CFD) with an optimization scheme based on the use of the techniques Design of Experiments (DOE), Function Approximation technique (FA) and Multi-Objective Genetic Algorithm (MOGA), has been applied to the shape optimization of the staggered herringbone micromixer (SHM) at different Reynolds numbers. To quantify the mixing intensity in the mixer a Mixing index is defined on the basis of the intensity of segregation of the mass concentration on the outlet section. Four geometric parameters, i.e., aspect ratio of the mixing channel, ratio of groove depth to channel height, ratio of groove width to groove pitch and the asymmetry factor (offset) of groove, are the design variables selected for optimization. The mixing index at the outlet section and the pressure drop in the mixing channel are the performance criteria used as objective functions. The Pareto front with the optimum trade-offs, maximum mixing index with minimum pressure drop, is obtained. Experiments for qualitative and quantitative validation have been implemented.This study is supported by the Dorothy Hodgkin Postgraduate Award (DHPA) of the Engineering and Physical Sciences Research Council (EPSRC) of United Kingdom and Ebara Research Co. Ltd. of Japan
Generating sequential space-filling designs using genetic algorithms and Monte Carlo methods
In this paper, the authors compare a Monte Carlo method and an optimization-based approach using genetic algorithms for sequentially generating space-filling experimental designs. It is shown that Monte Carlo methods perform better than genetic algorithms for this specific problem
Orthogonal methods based ant colony search for solving continuous optimization problems
Research into ant colony algorithms for solving continuous optimization problems forms one of the most
significant and promising areas in swarm computation. Although traditional ant algorithms are designed for combinatorial
optimization, they have shown great potential in solving a wide range of optimization problems, including continuous
optimization. Aimed at solving continuous problems effectively, this paper develops a novel ant algorithm termed "continuous orthogonal ant colony" (COAC), whose pheromone deposit mechanisms would enable ants to search for
solutions collaboratively and effectively. By using the orthogonal design method, ants in the feasible domain can explore
their chosen regions rapidly and e±ciently. By implementing an "adaptive regional radius" method, the proposed
algorithm can reduce the probability of being trapped in local optima and therefore enhance the global search capability and accuracy. An elitist strategy is also employed to reserve the most valuable points. The performance of the COAC is
compared with two other ant algorithms for continuous optimization of API and CACO by testing seventeen functions
in the continuous domain. The results demonstrate that the proposed COAC algorithm outperforms the others
Machine Learning for Fluid Mechanics
The field of fluid mechanics is rapidly advancing, driven by unprecedented
volumes of data from field measurements, experiments and large-scale
simulations at multiple spatiotemporal scales. Machine learning offers a wealth
of techniques to extract information from data that could be translated into
knowledge about the underlying fluid mechanics. Moreover, machine learning
algorithms can augment domain knowledge and automate tasks related to flow
control and optimization. This article presents an overview of past history,
current developments, and emerging opportunities of machine learning for fluid
mechanics. It outlines fundamental machine learning methodologies and discusses
their uses for understanding, modeling, optimizing, and controlling fluid
flows. The strengths and limitations of these methods are addressed from the
perspective of scientific inquiry that considers data as an inherent part of
modeling, experimentation, and simulation. Machine learning provides a powerful
information processing framework that can enrich, and possibly even transform,
current lines of fluid mechanics research and industrial applications.Comment: To appear in the Annual Reviews of Fluid Mechanics, 202
- …