306 research outputs found
IRS-assisted UAV Communications: A Comprehensive Review
Intelligent reflecting surface (IRS) can smartly adjust the wavefronts in
terms of phase, frequency, amplitude and polarization via passive reflections
and without any need of radio frequency (RF) chains. It is envisaged as an
emerging technology which can change wireless communication to improve both
energy and spectrum efficiencies with low energy consumption and low cost. It
can intelligently configure the wireless channels through a massive number of
cost effective passive reflecting elements to improve the system performance.
Similarly, unmanned aerial vehicle (UAV) communication has gained a viable
attention due to flexible deployment, high mobility and ease of integration
with several technologies. However, UAV communication is prone to security
issues and obstructions in real-time applications. Recently, it is foreseen
that UAV and IRS both can integrate together to attain unparalleled
capabilities in difficult scenarios. Both technologies can ensure improved
performance through proactively altering the wireless propagation using smart
signal reflections and maneuver control in three dimensional (3D) space. IRS
can be integrated in both aerial and terrene environments to reap the benefits
of smart reflections. This study briefly discusses UAV communication, IRS and
focuses on IRS-assisted UAC communications. It surveys the existing literature
on this emerging research topic and highlights several promising technologies
which can be implemented in IRS-assisted UAV communication. This study also
presents several application scenarios and open research challenges. This study
goes one step further to elaborate research opportunities to design and
optimize wireless systems with low energy footprint and at low cost. Finally,
we shed some light on future research aspects for IRS-assisted UAV
communication
Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit
and receive on the same frequency band, which challenges the traditional
assumption in wireless network design. The full-duplex capability enhances
spectral efficiency and decreases latency, which are two key drivers pushing
the performance expectations of next-generation mobile networks. In less than
ten years, in-band FD has advanced from being demonstrated in research labs to
being implemented in standards and products, presenting new opportunities to
utilize its foundational concepts. Some of the most significant opportunities
include using FD to enable wireless networks to sense the physical environment,
integrate sensing and communication applications, develop integrated access and
backhaul solutions, and work with smart signal propagation environments powered
by reconfigurable intelligent surfaces. However, these new opportunities also
come with new challenges for large-scale commercial deployment of FD
technology, such as managing self-interference, combating cross-link
interference in multi-cell networks, and coexistence of dynamic time division
duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa
Space-Air-Ground Integrated 6G Wireless Communication Networks: A Review of Antenna Technologies and Application Scenarios
A review of technological solutions and advances in the framework of a Vertical Heterogeneous Network (VHetNet) integrating satellite, airborne and terrestrial networks is presented. The disruptive features and challenges offered by a fruitful cooperation among these segments within a ubiquitous and seamless wireless connectivity are described. The available technologies and the key research directions for achieving global wireless coverage by considering all these layers are thoroughly discussed. Emphasis is placed on the available antenna systems in satellite, airborne and ground layers by highlighting strengths and weakness and by providing some interesting trends in research. A summary of the most suitable applicative scenarios for future 6G wireless communications are finally illustrated
1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface
A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance
Beam scanning by liquid-crystal biasing in a modified SIW structure
A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium
Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting
Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has
aroused. Specifically, UAVs can be used in cellular networks as aerial users
for delivery, surveillance, rescue search, or as an aerial base station (aBS)
for communication with ground users in remote uncovered areas or in dense
environments requiring prompt high capacity. Aiming to satisfy the high
requirements of wireless aerial networks, several multiple access techniques
have been investigated. In particular, space-division multiple access(SDMA) and
power-domain non-orthogonal multiple access (NOMA) present promising
multiplexing gains for aerial downlink and uplink. Nevertheless, these gains
are limited as they depend on the conditions of the environment. Hence, a
generalized scheme has been recently proposed, called rate-splitting multiple
access (RSMA), which is capable of achieving better spectral efficiency gains
compared to SDMA and NOMA. In this paper, we present a comprehensive survey of
key multiple access technologies adopted for aerial networks, where aBSs are
deployed to serve ground users. Since there have been only sporadic results
reported on the use of RSMA in aerial systems, we aim to extend the discussion
on this topic by modelling and analyzing the weighted sum-rate performance of a
two-user downlink network served by an RSMA-based aBS. Finally, related open
issues and future research directions are exposed.Comment: 16 pages, 6 figures, submitted to IEEE Journa
- …