A novel design process of low cost 3D printed ambidextrous finger designed for an ambidextrous robotic hand

This paper presents the novel mechanical design of an ambidextrous finger specifically designed for an ambidextrous anthropomorphic robotic hand actuated by pneumatic artificial muscles. The ambidextrous nature of design allows fingers to perform both left and right hand movements. The aim of our design is to reduce the number of actuators, increase the range of movements with best possible range ideally greater than a common human finger. Four prototypes are discussed in this paper; first prototype is focused on the choice of material and to consider the possible ways to reduce friction. Second prototype is designed to investigate the tendons routing configurations. Aim of third and fourth prototype is to improve the overall performance and to maximize the grasping force. Finally, a unified design (Final design) is presented in great detail. Comparison of all prototypes is done from different angles to evaluate the best design. The kinematic features of intermediate mode have been analysed to optimize both the flexibility and the robustness of the system, as well as to minimize the number of pneumatic muscles. The final design of an ambidextrous finger has developed, tested and 3D printed

Design, modeling and implementation of a soft robotic neck for humanoid robots

Mención Internacional en el título de doctorSoft humanoid robotics is an emerging field that combines the flexibility and safety of soft robotics with the form and functionality of humanoid robotics. This thesis explores the potential for collaboration between these two fields with a focus on the development of soft joints for the humanoid robot TEO. The aim is to improve the robot’s adaptability and movement, which are essential for an efficient interaction with its environment. The research described in this thesis involves the development of a simple and easily transportable soft robotic neck for the robot, based on a 2 Degree of Freedom (DOF) Cable Driven Parallel Mechanism (CDPM). For its final integration into TEO, the proposed design is later refined, resulting in an efficiently scaled prototype able to face significant payloads. The nonlinear behaviour of the joints, due mainly to the elastic nature of their soft links, makes their modeling a challenging issue, which is addressed in this thesis from two perspectives: first, the direct and inverse kinematic models of the soft joints are analytically studied, based on CDPM mathematical models; second, a data-driven system identification is performed based on machine learning techniques. Both approaches are deeply studied and compared, both in simulation and experimentally. In addition to the soft neck, this thesis also addresses the design and prototyping of a soft arm capable of handling external loads. The proposed design is also tendon-driven and has a morphology with two main bending configurations, which provides more versatility compared to the soft neck. In summary, this work contributes to the growing field of soft humanoid robotics through the development of soft joints and their application to the humanoid robot TEO, showcasing the potential of soft robotics to improve the adaptability, flexibility, and safety of humanoid robots. The development of these soft joints is a significant achievement and the research presented in this thesis paves the way for further exploration and development in this field.La robótica humanoide blanda es un campo emergente que combina la flexibilidad y seguridad de la robótica blanda con la forma y funcionalidad de la robótica humanoide. Esta tesis explora el potencial de colaboración entre estos dos campos centrándose en el desarrollo de una articulación blanda para el cuello del robot humanoide TEO. El objetivo es mejorar la adaptabilidad y el movimiento del robot, esenciales para una interacción eficaz con su entorno. La investigación descrita en esta tesis consiste en el desarrollo de un prototipo sencillo y fácilmente transportable de cuello blando para el robot, basado en un mecanismo paralelo actuado por cable de 2 grados de libertad. Para su integración final en TEO, el diseño propuesto es posteriormente refinado, resultando en un prototipo eficientemente escalado capaz de manejar cargas significativas. El comportamiemto no lineal de estas articulaciones, debido fundamentalmente a la naturaleza elástica de sus eslabones blandos, hacen de su modelado un gran reto, que en esta tesis se aborda desde dos perspectivas diferentes: primero, los modelos cinemáticos directo e inverso de las articulaciones blandas se estudian analíticamente, basándose en modelos matemáticos de mecanismos paralelos actuados por cable; segundo, se aborda el problema de la identificación del sistema mediante técnicas basadas en machine learning. Ambas propuestas se estudian y comparan en profundidad, tanto en simulación como experimentalmente. Además del cuello blando, esta tesis también aborda el diseño de un brazo robótico blando capaz de manejar cargas externas. El diseño propuesto está igualmente basado en accionamiento por tendones y tiene una morfología con dos configuraciones principales de flexión, lo que proporciona una mayor versatilidad en comparación con el cuello robótico blando. En resumen, este trabajo contribuye al creciente campo de la robótica humanoide blanda mediante el desarrollo de articulaciones blandas y su aplicación al robot humanoide TEO, mostrando el potencial de la robótica blanda para mejorar la adaptabilidad, flexibilidad y seguridad de los robots humanoides. El desarrollo de estas articulaciones es una contribución significativa y la investigación presentada en esta tesis allana el camino hacia nuevos desarrollos y retos en este campo.Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidenta: Cecilia Elisabet García Cena.- Secretario: Dorin Sabin Copaci.- Vocal: Martin Fodstad Stole

The design, kinematics and torque analysis of the self-bending soft contraction actuator

This article presents the development of a self-bending contraction actuator (SBCA) through analysis of its structure, kinematics, and torque formulas, and then explores its applications. The proposed actuator has been fabricated by two methods to prove the efficiency of the human body inspiration, which represents the covering of human bones by soft tissues to protect the bone and give the soft texture. The SBCA provides bending behaviour along with a high force to-weight ratio. As with the simple pneumatic muscle actuator (PMA), the SBCA is soft and easy to implement. Both the kinematics and the torque formula presented for the SBCA are scalable and can be used with different actuator sizes. The bending actuator has been tested under an air pressure up to 500 kPa, and the behaviour of its bending angle, parameters, dimensions, and the bending torques have been illustrated. On the other hand, the experiments showed the efficient performances of the actuator and validate the proposed kinematics. Therefore, the actuator can be used in many different applications, such as soft grippers and continuum arms

Do robots outperform humans in human-centered domains?

The incessant progress of robotic technology and rationalization of human manpower induces high expectations in society, but also resentment and even fear. In this paper, we present a quantitative normalized comparison of performance, to shine a light onto the pressing question, "How close is the current state of humanoid robotics to outperforming humans in their typical functions (e.g., locomotion, manipulation), and their underlying structures (e.g., actuators/muscles) in human-centered domains?" This is the most comprehensive comparison of the literature so far. Most state-of-the-art robotic structures required for visual, tactile, or vestibular perception outperform human structures at the cost of slightly higher mass and volume. Electromagnetic and fluidic actuation outperform human muscles w.r.t. speed, endurance, force density, and power density, excluding components for energy storage and conversion. Artificial joints and links can compete with the human skeleton. In contrast, the comparison of locomotion functions shows that robots are trailing behind in energy efficiency, operational time, and transportation costs. Robots are capable of obstacle negotiation, object manipulation, swimming, playing soccer, or vehicle operation. Despite the impressive advances of humanoid robots in the last two decades, current robots are not yet reaching the dexterity and versatility to cope with more complex manipulation and locomotion tasks (e.g., in confined spaces). We conclude that state-of-the-art humanoid robotics is far from matching the dexterity and versatility of human beings. Despite the outperforming technical structures, robot functions are inferior to human ones, even with tethered robots that could place heavy auxiliary components off-board. The persistent advances in robotics let us anticipate the diminishing of the gap

An Overview of Legged Robots

The objective of this paper is to present the evolution and the state-of-theart in the area of legged locomotion systems. In a first phase different possibilities for mobile robots are discussed, namely the case of artificial legged locomotion systems, while emphasizing their advantages and limitations. In a second phase an historical overview of the evolution of these systems is presented, bearing in mind several particular cases often considered as milestones on the technological and scientific progress. After this historical timeline, some of the present day systems are examined and their performance is analyzed. In a third phase are pointed out the major areas for research and development that are presently being followed in the construction of legged robots. Finally, some of the problems still unsolved, that remain defying robotics research, are also addressed.N/