On the Merits of Deploying TDM-based Next-Generation PON Solutions in the Access Arena As Multiservice, All Packet-Based 4G Mobile Backhaul RAN Architecture

The phenomenal growth of mobile backhaul capacity required to support the emerging fourth-generation (4G) traffic including mobile WiMAX, cellular Long-Term Evolution (LTE), and LTE-Advanced (LTE-A) requires rapid migration from today\u27s legacy circuit switched T1/E1 wireline and microwave backhaul technologies to a new fiber-supported, all-packet-based mobile backhaul infrastructure. Clearly, a cost effective fiber supported all-packet-based mobile backhaul radio access network (RAN) architecture that is compatible with these inherently distributed 4G RAN architectures is needed to efficiently scale current mobile backhaul networks. However, deploying a green fiber-based mobile backhaul infrastructure is a costly proposition mainly due to the significant cost associated with digging the trenches in which the fiber is to be laid. These, along with the inevitable trend towards all-IP/Ethernet transport protocols and packet switched networks, have prompted many carriers around the world to consider the potential of utilizing the existing fiber-based Passive Optical Network (PON) access infrastructure as an all-packet-based converged fixed-mobile optical access networking transport architecture to backhaul both mobile and typical wireline traffic. Passive Optical Network (PON)-based fiber-to-the-curb/home (FTTC/FTTH) access networks are being deployed around the globe based on two Time-Division Multiplexed (TDM) standards: ITU G.984 Gigabit PON (GPON) and IEEE 802.ah Ethernet PON (EPON). A PON connects a group of Optical Network Units (ONUs) located at the subscriber premises to an Optical Line Terminal (OLT) located at the service provider\u27s facility. It is the purpose of this thesis to examine the technological requirements and assess the performance analysis and feasibility for deploying TDM-based next-generation (NG) PON solutions in the access arena as multiservice, all packet-based 4G mobile backhaul RAN and/or converged fixed-mobile optical networking architecture. Specifically, this work proposes and devises a simple and cost-effective 10G-EPON-based 4G mobile backhaul RAN architecture that efficiently transports and supports a wide range of existing and emerging fixed-mobile advanced multimedia applications and services along with the diverse quality of service (QoS), rate, and reliability requirements set by these services. The techno-economics merits of utilizing PON-based 4G RAN architecture versus that of traditional 4G (mobile WiMAX and LTE) RAN will be thoroughly examine and quantified. To achieve our objective, we utilize the existing fiber-based PON access infrastructure with novel ring-based distribution access network and wireless-enabled OLT and ONUs as the multiservice packet-based 4G mobile backhaul RAN infrastructure. Specifically, to simplify the implementation of such a complex undertaking, this work is divided into two sequential phases. In the first phase, we examine and quantify the overall performance of the standalone ring-based 10G-EPON architecture (just the wireline part without overlaying/incorporating the wireless part (4G RAN)) via modeling and simulations. We then assemble the basic building blocks, components, and sub-systems required to build up a proof-of-concept prototype testbed for the standalone ring-based EPON architecture. The testbed will be used to verify and demonstrate the performance of the standalone architecture, specifically, in terms of power budget, scalability, and reach. In the second phase, we develop an integrated framework for the efficient interworking between the two wireline PON and 4G mobile access technologies, particularly, in terms of unified network control and management (NCM) operations. Specifically, we address the key technical challenges associated with tailoring a typically centralized PON-based access architecture to interwork with and support a distributed 4G RAN architecture and associated radio NCM operations. This is achieved via introducing and developing several salient-networking innovations that collectively enable the standalone EPON architecture to support a fully distributed 4G mobile backhaul RAN and/or a truly unified NG-PON-4G access networking architecture. These include a fully distributed control plane that enables intercommunication among the access nodes (ONUs/BSs) as well as signaling, scheduling algorithms, and handoff procedures that operate in a distributed manner. Overall, the proposed NG-PON architecture constitutes a complete networking paradigm shift from the typically centralized PON\u27s architecture and OLT-based NCM operations to a new disruptive fully distributed PON\u27s architecture and NCM operations in which all the typically centralized OLT-based PON\u27s NCM operations are migrated to and independently implemented by the access nodes (ONUs) in a distributed manner. This requires migrating most of the typically centralized wireline and radio control and user-plane functionalities such as dynamic bandwidth allocation (DBA), queue management and packet scheduling, handover control, radio resource management, admission control, etc., typically implemented in today\u27s OLT/RNC, to the access nodes (ONUs/4G BSs). It is shown that the overall performance of the proposed EPON-based 4G backhaul including both the RAN and Mobile Packet Core (MPC) {Evolved Packet Core (EPC) per 3GPP LTE\u27s standard} is significantly augmented compared to that of the typical 4G RAN, specifically, in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. Furthermore, the proposed architecture enables redistributing some of the intelligence and NCM operations currently centralized in the MPC platform out into the access nodes of the mobile RAN. Specifically, as this work will show, it enables offloading sizable fraction of the mobile signaling as well as actual local upstream traffic transport and processing (LTE bearers switch/set-up, retain, and tear-down and associated signaling commands from the BSs to the EPC and vice-versa) from the EPC to the access nodes (ONUs/BSs). This has a significant impact on the performance of the EPC. First, it frees up a sizable fraction of the badly needed network resources as well as processing on the overloaded centralized serving nodes (AGW) in the MPC. Second, it frees up capacity and sessions on the typically congested mobile backhaul from the BSs to the EPC and vice-versa

View on 5G Architecture: Version 1.0

The current white paper focuses on the produced results after one year research mainly from 16 projects working on the abovementioned domains. During several months, representatives from these projects have worked together to identify the key findings of their projects and capture the commonalities and also the different approaches and trends. Also they have worked to determine the challenges that remain to be overcome so as to meet the 5G requirements. The goal of 5G Architecture Working Group is to use the results captured in this white paper to assist the participating projects achieve a common reference framework. The work of this working group will continue during the following year so as to capture the latest results to be produced by the projects and further elaborate this reference framework. The 5G networks will be built around people and things and will natively meet the requirements of three groups of use cases: • Massive broadband (xMBB) that delivers gigabytes of bandwidth on demand • Massive machine-type communication (mMTC) that connects billions of sensors and machines • Critical machine-type communication (uMTC) that allows immediate feedback with high reliability and enables for example remote control over robots and autonomous driving. The demand for mobile broadband will continue to increase in the next years, largely driven by the need to deliver ultra-high definition video. However, 5G networks will also be the platform enabling growth in many industries, ranging from the IT industry to the automotive, manufacturing industries entertainment, etc. 5G will enable new applications like for example autonomous driving, remote control of robots and tactile applications, but these also bring a lot of challenges to the network. Some of these are related to provide low latency in the order of few milliseconds and high reliability compared to fixed lines. But the biggest challenge for 5G networks will be that the services to cater for a diverse set of services and their requirements. To achieve this, the goal for 5G networks will be to improve the flexibility in the architecture. The white paper is organized as follows. In section 2 we discuss the key business and technical requirements that drive the evolution of 4G networks into the 5G. In section 3 we provide the key points of the overall 5G architecture where as in section 4 we elaborate on the functional architecture. Different issues related to the physical deployment in the access, metro and core networks of the 5G network are discussed in section 5 while in section 6 we present software network enablers that are expected to play a significant role in the future networks. Section 7 presents potential impacts on standardization and section 8 concludes the white paper

Joint access-backhaul perspective on mobility management in 5G networks

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The ongoing efforts in the research, development and standardization of 5G, by both industry and academia, have resulted in the identification of enablers (Software Defined Networks, Network Function Virtualization, Distributed Mobility Management, etc.) and critical areas (Mobility management, Interference management, Joint access-backhaul mechanisms, etc.) that will help achieve the 5G objectives. During these efforts, it has also been identified that the 5G networks, due to their high degree of heterogeneity, high QoS demand and the inevitable density (both in terms of access points and users), will need to have efficient joint backhaul and access mechanisms as well as enhanced mobility management mechanisms in order to be effective, efficient and ubiquitous. Therefore, in this paper, we first provide a discussion on the evolution of the backhaul scenario, and the necessity for joint access and backhaul optimization. Subsequently, and since mobility management mechanisms can entail the availability, reliability and heterogeneity of the future backhaul/fronthaul networks as parameters in determining the most optimal solution for a given context, a study with regards to the effect of future backhaul/fronthaul scenarios on the design and implementation of mobility management solutions in 5G networks has been performed.Postprint (author's final draft

5G Backhaul Challenges and Emerging Research Directions: A Survey

5G is the next cellular generation and is expected to quench the growing thirst for taxing data rates and to enable the Internet of Things. Focused research and standardization work have been addressing the corresponding challenges from the radio perspective while employing advanced features, such as network densi cation, massive multiple-input-multiple-output antennae, coordinated multi-point processing, intercell interference mitigation techniques, carrier aggregation, and new spectrum exploration. Nevertheless, a new bottleneck has emerged: the backhaul. The ultra-dense and heavy traf c cells should be connected to the core network through the backhaul, often with extreme requirements in terms of capacity, latency, availability, energy, and cost ef ciency. This pioneering survey explains the 5G backhaul paradigm, presents a critical analysis of legacy, cutting-edge solutions, and new trends in backhauling, and proposes a novel consolidated 5G backhaul framework. A new joint radio access and backhaul perspective is proposed for the evaluation of backhaul technologies which reinforces the belief that no single solution can solve the holistic 5G backhaul problem. This paper also reveals hidden advantages and shortcomings of backhaul solutions, which are not evident when backhaul technologies are inspected as an independent part of the 5G network. This survey is key in identifying essential catalysts that are believed to jointly pave the way to solving the beyond-2020 backhauling challenge. Lessons learned, unsolved challenges, and a new consolidated 5G backhaul vision are thus presented

Cloud RAN for Mobile Networks - a Technology Overview

Cloud Radio Access Network (C-RAN) is a novel mobile network architecture which can address a number of challenges the operators face while trying to support growing end-user’s needs. The main idea behind C-RAN is to pool the Baseband Units (BBUs) from multiple base stations into centralized BBU Pool for statistical multiplexing gain, while shifting the burden to the high-speed wireline transmission of In-phase and Quadrature (IQ) data. C-RAN enables energy efficient network operation and possible cost savings on base- band resources. Furthermore, it improves network capacity by performing load balancing and cooperative processing of signals originating from several base stations. This article surveys the state-of-the-art literature on C-RAN. It can serve as a starting point for anyone willing to understand C-RAN architecture and advance the research on C-RA

Optimizing total cost of ownership (TCO) for 5G multi-tenant mobile backhaul (MBH) optical transport networks

Legacy network elements are reaching end-of-life and packet-based transport networks are not efficiently optimized. In particular, high density cell architecture in future 5G networks will face big technical and financial challenges due to avalanche of traffic volume and massive growth in connected devices. Raising density and ever-increasing traffic demand within future 5G Heterogeneous Networks (HetNets) will result in huge deployment, expansion and operating costs for upcoming Mobile BackHaul (MBH) networks with flat revenue generation. Thus, the goal of this dissertation is to provide an efficient physical network planning mechanism and an optimized resource engineering tool in order to reduce the Total Cost of Ownership (TCO) and increase the generated revenues. This will help Service Providers (SPs) and Mobile Network Operators (MNOs) to improve their network scalability and maintain positive Project Profit Margins (PPM). In order to meet this goal, three key issues are required to be addressed in our framework and are summarized as follows: i) how to design and migrate to a scalable and reliable MBH network in an optimal cost?, ii) how to control the deployment and activation of the network resources in such MBH based on required traffic demand in an efficient and cost-effective way?, and iii) how to enhance the resource sharing in such network and maximize the profit margins in an efficient way? As part of our contributions to address the first issue highlighted above and to plan the MBH with reduced network TCO and improved scalability, we propose a comprehensive migration plan towards an End-to-End Integrated-Optical-Packet-Network (E2-IOPN) for SP optical transport networks. We review various empirical challenges faced by a real SP during the transformation process towards E2-IOPN as well as the implementation of an as-built plan and a high-level design (HLD) for migrating towards lower cost-per-bit GPON, MPLS-TP, OTN and next-generation DWDM technologies. Then, we propose a longer-term strategy based on SDN and NFV approach that will offer rapid end-to-end service provisioning with costefficient centralized network control. We define CapEx and OpEx cost models and drive a cost comparative study that shows the benefit and financial impact of introducing new low-cost packet-based technologies to carry traffic from legacy and new services. To address the second issue, we first introduce an algorithm based on a stochastic geometry model (Voronoi Tessellation) to more precisely define MBH zones within a geographical area and more accurately calculate required traffic demands and related MBH infrastructure. In order to optimize the deployment and activation of the network resources in the MBH in an efficient and cost-effective way, we propose a novel method called BackHauling-as-a-Service (BHaaS) for network planning and Total Cost of Ownership (TCO) analysis based on required traffic demand and a "You-pay-only-for-what-you-use" approach. Furthermore, we enhance BHaaS performance by introducing a more service-aware method called Traffic-Profile-asa- Service (TPaaS) to further drive down the costs based on yearly activated traffic profiles. Results show that BHaaS and TPaaS may enhance by 22% the project benefit compared to traditional TCO model. Finally, we introduce a new cost (CapEx and OpEx) models for 5G multi-tenant Virtualized MBH (V-MBH) as part of our contribution to address the third issue. In fact, in order to enhance the resource sharing and maximize the network profits, we drive a novel pay-as-yougrow and optimization model for the V-MBH called Virtual-Backhaul-as-a-Service (VBaaS). VBaaS can serve as a planning tool to optimize the Project Profit Margin (PPM) while considering the TCO and the yearly generated Return-on-Investment (ROI). We formulate an MNO Pricing Game (MPG) for TCO optimization to calculate the optimal Pareto-Equilibrium pricing strategy for offered Tenant Service Instances (TSI). Then, we compare CapEx, OpEx, TCO, ROI and PPM for a specific use-case known in the industry as CORD project using Traditional MBH (T-MBH) versus Virtualized MBH (V-MBH) as well as using randomized versus Pareto-Equilibrium pricing strategies. The results of our framework offer SPs and MNOs a more precise estimation of traffic demand, an optimized infrastructure planning and yearly resource deployment as well as an optimized TCO analysis (CapEx and OpEx) with enhanced pricing strategy and generated ROI. Numerical results show more than three times increase in network profitability using our proposed solutions compared with Traditional MBH (T-MBH) methods