Design techniques for low-power systems

Portable products are being used increasingly. Because these systems are battery powered, reducing power consumption is vital. In this report we give the properties of low-power design and techniques to exploit them on the architecture of the system. We focus on: minimizing capacitance, avoiding unnecessary and wasteful activity, and reducing voltage and frequency. We review energy reduction techniques in the architecture and design of a hand-held computer and the wireless communication system including error control, system decomposition, communication and MAC protocols, and low-power short range networks

Low Power system Design techniques for mobile computers

Portable products are being used increasingly. Because these systems are battery powered, reducing power consumption is vital. In this report we give the properties of low power design and techniques to exploit them on the architecture of the system. We focus on: min imizing capacitance, avoiding unnecessary and wasteful activity, and reducing voltage and frequency. We review energy reduction techniques in the architecture and design of a hand-held computer and the wireless communication system, including error control, sys tem decomposition, communication and MAC protocols, and low power short range net works

Accelerator Memory Reuse in the Dark Silicon Era

Accelerators integrated on-die with General-Purpose CPUs (GP-CPUs) can yield significant performance and power improvements. Their extensive use, however, is ultimately limited by their area overhead; due to their high degree of specialization, the opportunity cost of investing die real estate on accelerators can become prohibitive, especially for general-purpose architectures. In this paper we present a novel technique aimed at mitigating this opportunity cost by allowing GP-CPU cores to reuse accelerator memory as a non-uniform cache architecture (NUCA) substrate. On a system with a last level-2 cache of 128kB, our technique achieves on average a 25% performance improvement when reusing four 512 kB accelerator memory blocks to form a level-3 cache. Making these blocks reusable as NUCA slices incurs on average in a 1.89% area overhead with respect to equally-sized ad hoc cache slice

Layer assignment and routing optimization for advanced technologies

As VLSI technology scales to deep sub-micron and beyond, it becomes increasingly challenging to achieve timing closure for VLSI design. Since a complete design flow consists of several phases, such as logic synthesis, placement, and routing, interconnect synthesis plays an important role which includes buffer insertion/sizing and timing-driven routing. Although progress has been achieved by many advanced routing techniques, the following aspects can be exploited sufficiently for further improvement: (1) incremental layer assignment for timing optimization; (2) signal routing with the requirement of regularity; (3) power-efficient optical-electrical interconnect paradigm. Thus, to perform the layer assignment and routing optimization for advanced technologies, an automated routing engine in a global view is essential to benefit the interconnect design while satisfying specific requirements. This dissertation proposes a set of algorithms and methodology on layer assignment and routing optimization for advanced technologies. The research includes two timing-driven incremental layer assignment approaches, synergistic topology generation and routing synthesis for signal groups, and optical-electrical routing design for power efficiency. For incremental layer assignment, most of the conventional approaches target via minimization but neglect the timing issues. Meanwhile, via delays are ignored but should be considered in emerging technology nodes. Then two timing-driven incremental layer assignment frameworks are proposed, where all the nets are solved simultaneously with the integration of via delays: (1) optimization of the total sum of net delays and reduction of slew violations; (2) minimization of critical path timing in selected nets. For on-chip signal routing, the bundled bits in one group may have different pin locations, but they have to be routed in a regular manner by sharing common topologies. Very few previous works target inter-bit regularity via multi-layer topology selection. Furthermore, the routability and wire-length of the signal bits should also be optimized. Then an advanced synergistic routing engine is promoted, which is able to not only control routability and wire-length but also guide each bit routing intelligently for design regularity. For optical-electrical co-design routing, optical interconnect shows its advantage due to the dominance of bandwidth-distance-power properties. The previous works lack a detailed exploration of optical-electrical co-design for on-chip interconnects. During the transmission, signal quality can be affected by various loss sources and Electrical to Optical (EO)/Optical to Electrical (OE) conversion overheads should also be considered. Then a power-efficient routing flow for on-chip signals is presented, where optical connections can collaborate with electrical wires seamlessly. The effectiveness of proposed algorithms and techniques is demonstrated in this dissertation. These approaches are able to achieve the improvements regarding specific metrics and eventually benefit the routing flow.Electrical and Computer Engineerin

An extra-memetic empirical methodology to accompany theoretical memetics

Abstract Purpose: The paper describes the difficulties encountered by researchers who are looking to operationalise theoretical memetics and provides a methodological avenue for studies that can test meme theory. Design/Methodology/Approach: The application of evolutionary theory to organisations is reviewed by critically reflecting on the validity of its truth claims. To focus the discussion a number of applications of meme theory are reviewed to raise specific issues which ought to be the subject of empirical investigation. Subsequently, the empirical studies conducted to date are assessed in terms of the progress made and conclusions for further work are drawn. Findings: The paper finds that the key questions posed by memetic theory have yet to be addressed empirically and that a recurring weakness is the practice of assuming the existence of a replicating unit of culture which has, however, yet to be demonstrated as a valid concept. Therefore, an 'extra-memetic' methodology is deemed to be necessary for the development of memetics as a scientific endeavour. Narrative analysis is abducted as an appropriate avenue for the operationalisation of extra-memetic empirical research. Originality/Value: The paper highlights inconsistencies, embedded in much of the memetic literature, which have not previously been recognised and the colloquial nature of the discipline is challenged from a positive but critical perspective. Consequently, the paper develops a rationale for the adoption of a widely recognised social science methodology for memetics which has been absent to date. In proposing narrative orientated research, knowledge concerning memes' validity can be facilitated whilst avoiding the current circularity in memetic truth claims. Key Words: Meme, Memetics, Narrative, Complexity, Evolution Classification: Conceptual Pape

Macro-Driven Circuit Design Methodology for High-Performance Datapaths

Datapath design is one of the most critical elements in the design of a high performance microprocessor. However datapath design is typically done manually, and is often custom style. This adversely impacts the overall productivity of the design team, as well as the quality of the design. In spite of this, very little automation has been available to the designers of high performance datapaths. In this paper we present a new "macrodriven " approach to the design of datapath circuits. Our approach, referred to as SMART (Smart Macro Design Advisor), is based on automatic generation of regular datapath components such as muxes, comparators, adders etc., which we refer to as datapath macros. The generated solution is based on designer provided constraints such as delay, load and slope, and is optimized for a designer provided cost metric such as power, area. Results on datapath circuits of a high-performance microprocessor show that this approach is very effective for both designer productivity as well as design quality