12,362 research outputs found
Estimating Epipolar Geometry With The Use of a Camera Mounted Orientation Sensor
Context: Image processing and computer vision are rapidly becoming more and more commonplace, and the amount of information about a scene, such as 3D geometry, that can be obtained from an image, or multiple images of the scene is steadily increasing due to increasing resolutions and availability of imaging sensors, and an active research community. In parallel, advances in hardware design and manufacturing are allowing for devices such as gyroscopes, accelerometers and magnetometers and GPS receivers to be included alongside imaging devices at a consumer level.
Aims: This work aims to investigate the use of orientation sensors in the field of computer vision as sources of data to aid with image processing and the determination of a scene’s geometry, in particular, the epipolar geometry of a pair of images - and devises a hybrid methodology from two sets of previous works in order to exploit the information available from orientation sensors alongside data gathered from image processing techniques.
Method: A readily available consumer-level orientation sensor was used alongside a digital camera to capture images of a set of scenes and record the orientation of the camera. The fundamental matrix of these pairs of images was calculated using a variety of techniques - both incorporating data from the orientation sensor and excluding its use
Results: Some methodologies could not produce an acceptable result for the Fundamental Matrix on certain image pairs, however, a method described in the literature that used an orientation sensor always produced a result - however in cases where the hybrid or purely computer vision methods also produced a result - this was found to be the least accurate.
Conclusion: Results from this work show that the use of an orientation sensor to capture information alongside an imaging device can be used to improve both the accuracy and reliability of calculations of the scene’s geometry - however noise from the orientation sensor can limit this accuracy and further research would be needed to determine the magnitude of this problem and methods of mitigation
Inertial sensor-based knee flexion/extension angle estimation
A new method for estimating knee joint flexion/extension angles from segment acceleration and angular velocity data is described. The approach uses a combination of Kalman filters and biomechanical constraints based on anatomical knowledge. In contrast to many recently published methods, the proposed approach does not make use of the earth’s magnetic field and hence is insensitive to the complex field distortions commonly found in modern buildings. The method was validated experimentally by calculating knee angle from measurements taken from two IMUs placed on adjacent body segments. In contrast to many previous studies which have validated their approach during relatively slow activities or over short durations, the performance of the algorithm was evaluated during both walking and running over 5 minute periods. Seven healthy subjects were tested at various speeds from 1 to 5 miles/hour. Errors were estimated by comparing the results against data obtained simultaneously from a 10 camera motion tracking system (Qualysis). The average measurement error ranged from 0.7 degrees for slow walking (1 mph) to 3.4 degrees for running (5mph). The joint constraint used in the IMU analysis was derived from the Qualysis data. Limitations of the method, its clinical application and its possible extension are discussed
FlightGoggles: A Modular Framework for Photorealistic Camera, Exteroceptive Sensor, and Dynamics Simulation
FlightGoggles is a photorealistic sensor simulator for perception-driven
robotic vehicles. The key contributions of FlightGoggles are twofold. First,
FlightGoggles provides photorealistic exteroceptive sensor simulation using
graphics assets generated with photogrammetry. Second, it provides the ability
to combine (i) synthetic exteroceptive measurements generated in silico in real
time and (ii) vehicle dynamics and proprioceptive measurements generated in
motio by vehicle(s) in a motion-capture facility. FlightGoggles is capable of
simulating a virtual-reality environment around autonomous vehicle(s). While a
vehicle is in flight in the FlightGoggles virtual reality environment,
exteroceptive sensors are rendered synthetically in real time while all complex
extrinsic dynamics are generated organically through the natural interactions
of the vehicle. The FlightGoggles framework allows for researchers to
accelerate development by circumventing the need to estimate complex and
hard-to-model interactions such as aerodynamics, motor mechanics, battery
electrochemistry, and behavior of other agents. The ability to perform
vehicle-in-the-loop experiments with photorealistic exteroceptive sensor
simulation facilitates novel research directions involving, e.g., fast and
agile autonomous flight in obstacle-rich environments, safe human interaction,
and flexible sensor selection. FlightGoggles has been utilized as the main test
for selecting nine teams that will advance in the AlphaPilot autonomous drone
racing challenge. We survey approaches and results from the top AlphaPilot
teams, which may be of independent interest.Comment: Initial version appeared at IROS 2019. Supplementary material can be
found at https://flightgoggles.mit.edu. Revision includes description of new
FlightGoggles features, such as a photogrammetric model of the MIT Stata
Center, new rendering settings, and a Python AP
The Event-Camera Dataset and Simulator: Event-based Data for Pose Estimation, Visual Odometry, and SLAM
New vision sensors, such as the Dynamic and Active-pixel Vision sensor
(DAVIS), incorporate a conventional global-shutter camera and an event-based
sensor in the same pixel array. These sensors have great potential for
high-speed robotics and computer vision because they allow us to combine the
benefits of conventional cameras with those of event-based sensors: low
latency, high temporal resolution, and very high dynamic range. However, new
algorithms are required to exploit the sensor characteristics and cope with its
unconventional output, which consists of a stream of asynchronous brightness
changes (called "events") and synchronous grayscale frames. For this purpose,
we present and release a collection of datasets captured with a DAVIS in a
variety of synthetic and real environments, which we hope will motivate
research on new algorithms for high-speed and high-dynamic-range robotics and
computer-vision applications. In addition to global-shutter intensity images
and asynchronous events, we provide inertial measurements and ground-truth
camera poses from a motion-capture system. The latter allows comparing the pose
accuracy of ego-motion estimation algorithms quantitatively. All the data are
released both as standard text files and binary files (i.e., rosbag). This
paper provides an overview of the available data and describes a simulator that
we release open-source to create synthetic event-camera data.Comment: 7 pages, 4 figures, 3 table
Real-time human ambulation, activity, and physiological monitoring:taxonomy of issues, techniques, applications, challenges and limitations
Automated methods of real-time, unobtrusive, human ambulation, activity, and wellness monitoring and data analysis using various algorithmic techniques have been subjects of intense research. The general aim is to devise effective means of addressing the demands of assisted living, rehabilitation, and clinical observation and assessment through sensor-based monitoring. The research studies have resulted in a large amount of literature. This paper presents a holistic articulation of the research studies and offers comprehensive insights along four main axes: distribution of existing studies; monitoring device framework and sensor types; data collection, processing and analysis; and applications, limitations and challenges. The aim is to present a systematic and most complete study of literature in the area in order to identify research gaps and prioritize future research directions
Integration of Absolute Orientation Measurements in the KinectFusion Reconstruction pipeline
In this paper, we show how absolute orientation measurements provided by
low-cost but high-fidelity IMU sensors can be integrated into the KinectFusion
pipeline. We show that integration improves both runtime, robustness and
quality of the 3D reconstruction. In particular, we use this orientation data
to seed and regularize the ICP registration technique. We also present a
technique to filter the pairs of 3D matched points based on the distribution of
their distances. This filter is implemented efficiently on the GPU. Estimating
the distribution of the distances helps control the number of iterations
necessary for the convergence of the ICP algorithm. Finally, we show
experimental results that highlight improvements in robustness, a speed-up of
almost 12%, and a gain in tracking quality of 53% for the ATE metric on the
Freiburg benchmark.Comment: CVPR Workshop on Visual Odometry and Computer Vision Applications
Based on Location Clues 201
- …