Performance Analysis of MIMO SFBC CI-COFDM System against the Nonlinear Distortion and Narrowband Interference

Carrier Interferometry Coded Orthogonal Frequency Division Multiplexing (CI-COFDM) system has been widely studied in multi-carrier communication system. The CI-COFDM system spreads each coded information symbol across all N sub-carriers using orthogonal CI spreading codes. The CI-COFDM system shows the advantages of Peak to Average Power Ratio (PAPR) reduction, frequency diversity and coding gain without any loss of communication throughput. On the other side, a great attention has been devoted to Multi Input Multi Output (MIMO) antenna systems and space-time-frequency processing. In this paper, we focus on two Transmit (Tx)/one Receive (Rx) antennas configuration and evaluate the performance of MIMO OFDM, MIMO CIOFDM and MIMO CI-COFDM systems. Space Frequency Block Coding (SFBC) is applied to MIMO OFDM, MIMO CI-ODFM and MIMO CI-COFDM systems. For CI-COFDM realization, digital implemented CI-COFDM is used in which information conventional is encoded, CI code spreading operation and carrier allocation are processed by IFFT type operation. From simulation results, it is shown that MIMO SFBC CI-COFDM reduces PAPR significantly as compared with that of MIMO SFBC CI-OFDM and MIMO SFBC OFDM systems. In Narrow Band Interference (NBI) channel MIMO SFBC CI-COFDM systems achieve considerable Bit Error Rate (BER) improvement compared with MMO SFBC CI-OFDM and MIMO SFBC OFDM system

Mitigating PAPR in cooperative wireless networks with frequency selective channels and relay selection

The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain. The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution. General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed. Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods

Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System

Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas. In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO). In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques. In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes. Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal

A hybrid-structure offset-QAM filter-bank multi-carrier MIMO system

Offset quadrature amplitude modulation (OQAM) filter-bank multi-carrier (FBMC), has great potential for boosting the spectral efficiency (SE) and energy efficiency (EE) of future communication systems. This is due to its superior spectral localization, CP-less transmission and relaxed synchronization requirements. Our research focuses on three main OQAM/FBMC research problems: the computational complexity reduction taking equalization into consideration, its integration with multiple-input multiple-output (MIMO) and its high peak-to-average power ratio (PAPR). OQAM/FBMC systems are mainly implemented either using frequency spreading (FS) or polyphase network (PPN) techniques. The PPN technique is generally less complex, but when using frequency domain equalization (FDE) to equalize multipath channel effects at the receiver, there is a computational complexity overhead when using PPN. A novel hybrid-structure OQAM/FBMC MIMO space-frequency block coding (SFBC) system is proposed, to achieve the lowest possible overall complexity in conjunction with FDE at the receiver in frequency selective Rayleigh fading channel. The Alamouti SFBC block coding is performed on the complex-orthogonal signal before OQAM processing, which resolves the problems of intrinsic interference when integrating OQAM/FBMC with MIMO. In better multipath channel conditions with a line-of-sight (LOS) path, a zero-forcing (ZF) time domain equalization (TDE) is exploited to further reduce the computational complexity with comparable performance bit-error-rate (BER). On the other hand, to tackle the high PAPR problem of the OQAM/FBMC system in the uplink, a novel single carrier (SC)-OQAM/FBMC MIMO system is proposed. The system uses DFT-spreading applied to the OQAM modulated signal, along with interleaved subcarrier mapping to significantly reduce the PAPR and enhance the BER performance over Rayleigh fading channels, with relatively low additional computational complexity compared to the original complexity of the FBMC system and compared to other FBMC PAPR reduction techniques.The proposed hybrid-structure system has shown significant BER performance in frequency-selective Rayleigh fading channels compared to OFDM, with significantly lower OOB emissions in addition to the enhanced SE due to the absence of CP. In mild multipath fading channels with a LOS component, the PPN OQAM/FBMC MIMO using TDE has a comparable BER performance with significantly less computational complexity. As for the uplink, the SC-OQAM/FBMC MIMO system significantly reduces the PAPR and enhances the BER performance, with relatively low additional computational complexity

Frequency-domain transmit processing for MIMO SC-FDMA in wideband propagation channels

This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available

Sustainable and Robust Techniques of Wireless Communications for Industry 4.0: Towards Efficient PAPR Reduction Models

This work presents the concerns of reliable, comprehensive, and high-quality communication networks essential in wireless communications for Industry 4.0. These are considered critical requirements of wireless technology for Industry 4.0. For a reliable transmission of digital data over broadband widths and Giga Hertz channels, the corresponding Peak-to-Average-Power Ratio (PAPR) must be under control. Industry standards Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing With Offset Quadrature Amplitude Modulation (MIMO-OFDM/OQAM) system has been considered as the modulation technique with less Computational Complexity (CC). It usually produces phase sequence sets with different PAPR, a complex phenomenon to control. For robustness in PAPR control, the technique proposed has a receiver that initially restores the frequency domain rotation signal according to the sequence selection of the transmitter. Then it compares the distance between the reverse rotation sequence and the nearest constellation point to restore the original sequence. The proposed method simulation results can efficiently suppress the PAPR of MIMO-OFDM/OQAM signals. The proposed method is compared with the traditional Selective Mapping (SLM) algorithm. The proposed method reduces the CC, and can obtain the approximate Bit-Error Rate (BER) performance of the conventional SLM method when the sideband side information is known