442 research outputs found
Robust Localization from Incomplete Local Information
We consider the problem of localizing wireless devices in an ad-hoc network
embedded in a d-dimensional Euclidean space. Obtaining a good estimation of
where wireless devices are located is crucial in wireless network applications
including environment monitoring, geographic routing and topology control. When
the positions of the devices are unknown and only local distance information is
given, we need to infer the positions from these local distance measurements.
This problem is particularly challenging when we only have access to
measurements that have limited accuracy and are incomplete. We consider the
extreme case of this limitation on the available information, namely only the
connectivity information is available, i.e., we only know whether a pair of
nodes is within a fixed detection range of each other or not, and no
information is known about how far apart they are. Further, to account for
detection failures, we assume that even if a pair of devices is within the
detection range, it fails to detect the presence of one another with some
probability and this probability of failure depends on how far apart those
devices are. Given this limited information, we investigate the performance of
a centralized positioning algorithm MDS-MAP introduced by Shang et al., and a
distributed positioning algorithm, introduced by Savarese et al., called
HOP-TERRAIN. In particular, for a network consisting of n devices positioned
randomly, we provide a bound on the resulting error for both algorithms. We
show that the error is bounded, decreasing at a rate that is proportional to
R/Rc, where Rc is the critical detection range when the resulting random
network starts to be connected, and R is the detection range of each device.Comment: 40 pages, 13 figure
Distance-based sensor node localization by using ultrasound, RSSI and ultra-wideband - A comparision between the techniques
Wireless sensor networks (WSNs) have become one of the most important topics in wireless communication during the last decade. In a wireless sensor system, sensors are spread over a region to build a sensor network and the sensors in a region co-operate to each other to sense, process, filter and routing.
Sensor Positioning is a fundamental and crucial issue for sensor network operation and management. WSNs have so many applications in different areas such as health-care, monitoring and control, rescuing and military; they all depend on nodes being able to accurately determine their locations.
This master’s thesis is focused on distance-based sensor node localization techniques; Received signal strength indicator, ultrasound and ultra-wideband. Characteristics and factors which affect these distance estimation techniques are analyzed theoretically and through simulation the quality of these techniques are compared in different scenarios.
MDS, a centralized algorithm is used for solving the coordinates. It is a set of data analysis techniques that display the structure of distance-like data as a geometrical picture. Centralized and distributed implementations of MDS are also discussed.
All simulations and computations in this thesis are done in Matlab. Virtual WSN is simulated on Sensorviz. Sensorviz is a simulation and visualization tool written by Andreas Savvides.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Distance-based sensor node localization by using ultrasound, RSSI and ultra-wideband - A comparision between the techniques
Wireless sensor networks (WSNs) have become one of the most important topics in wireless communication during the last decade. In a wireless sensor system, sensors are spread over a region to build a sensor network and the sensors in a region co-operate to each other to sense, process, filter and routing.
Sensor Positioning is a fundamental and crucial issue for sensor network operation and management. WSNs have so many applications in different areas such as health-care, monitoring and control, rescuing and military; they all depend on nodes being able to accurately determine their locations.
This master’s thesis is focused on distance-based sensor node localization techniques; Received signal strength indicator, ultrasound and ultra-wideband. Characteristics and factors which affect these distance estimation techniques are analyzed theoretically and through simulation the quality of these techniques are compared in different scenarios.
MDS, a centralized algorithm is used for solving the coordinates. It is a set of data analysis techniques that display the structure of distance-like data as a geometrical picture. Centralized and distributed implementations of MDS are also discussed.
All simulations and computations in this thesis are done in Matlab. Virtual WSN is simulated on Sensorviz. Sensorviz is a simulation and visualization tool written by Andreas Savvides.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
A survey of localization in wireless sensor network
Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network
A Review of Radio Frequency Based Localization for Aerial and Ground Robots with 5G Future Perspectives
Efficient localization plays a vital role in many modern applications of
Unmanned Ground Vehicles (UGV) and Unmanned aerial vehicles (UAVs), which would
contribute to improved control, safety, power economy, etc. The ubiquitous 5G
NR (New Radio) cellular network will provide new opportunities for enhancing
localization of UAVs and UGVs. In this paper, we review the radio frequency
(RF) based approaches for localization. We review the RF features that can be
utilized for localization and investigate the current methods suitable for
Unmanned vehicles under two general categories: range-based and fingerprinting.
The existing state-of-the-art literature on RF-based localization for both UAVs
and UGVs is examined, and the envisioned 5G NR for localization enhancement,
and the future research direction are explored
Design and realization of precise indoor localization mechanism for Wi-Fi devices
Despite the abundant literature in the field, there is still the need to find a time-efficient, highly accurate, easy to deploy and robust localization algorithm for real use. The algorithm only involves minimal human intervention. We propose an enhanced Received Signal Strength Indicator (RSSI) based positioning algorithm for Wi-Fi capable devices, called the Dynamic Weighted Evolution for Location Tracking (DWELT). Due to the multiple phenomena affecting the propagation of radio signals, RSSI measurements show fluctuations that hinder the utilization of straightforward positioning mechanisms from widely known propagation loss models. Instead, DWELT uses data processing of raw RSSI values and applies a weighted posterior-probabilistic evolution for quick convergence of localization and tracking. In this paper, we present the first implementation of DWELT, intended for 1D location (applicable to tunnels or corridors), and the first step towards a more generic implementation. Simulations and experiments show an accuracy of 1m in more than 81% of the cases, and less than 2m in the 95%.Peer ReviewedPostprint (published version
Anchor-Free Localization in Mixed Wireless Sensor Network Systems
Recent technological advances have fostered the emergence of Wireless Sensor Networks (WSNs), which consist of tiny, wireless, battery-powered nodes that are expected to revolutionize the ways in which we understand and construct complex physical systems. A fundamental property needed to use and maintain these WSNs is ``localization\u27\u27, which allows the establishment of spatial relationships among nodes over time. This dissertation presents a series of Geographic Distributed Localization (GDL) algorithms for mixed WSNs, in which both static and mobile nodes can coexist. The GDL algorithms provide a series of useful methods for localization in mixed WSNs. First, GDL provides an approximation called ``hop-coordinates\u27\u27, which improves the accuracy of both hop-counting and connectivity-based measurement techniques. Second, GDL utilizes a distributed algorithm to compute the locations of all nodes in static networks with the help of the hop-coordinates approximation. Third, GDL integrates a sensor component into this localization paradigm for possible mobility and as a result allows for a more complex deployment of WSNs as well as lower costs. In addition, the development of GDL incorporated the possibility of manipulated communications, such as wormhole attacks. Simulations show that such a localization system can provide fundamental support for security by detecting and localizing wormhole attacks. Although several localization techniques have been proposed in the past few years, none currently satisfies our requirements to provide an accurate, efficient and reliable localization for mixed WSNs. The contributions of this dissertation are: (1) our measurement technique achieves better accuracy both in measurement and localization than other methods; (2) our method significantly improves the efficiency of localization in updating location in mixed WSNs by incorporating sensors into the method; (3) our method can detect and locate the communication that has been manipulated by a wormhole in a network without relying on a central server
- …