494 research outputs found
Development of Josephson voltage standards
Neurology & clinical neurophysiolog
Chapter Development of Josephson voltage standards
Neurology & clinical neurophysiolog
Practical quantum realization of the ampere from the electron charge
One major change of the future revision of the International System of Units
(SI) is a new definition of the ampere based on the elementary charge \emph{e}.
Replacing the former definition based on Amp\`ere's force law will allow one to
fully benefit from quantum physics to realize the ampere. However, a quantum
realization of the ampere from \emph{e}, accurate to within in
relative value and fulfilling traceability needs, is still missing despite many
efforts have been spent for the development of single-electron tunneling
devices. Starting again with Ohm's law, applied here in a quantum circuit
combining the quantum Hall resistance and Josephson voltage standards with a
superconducting cryogenic amplifier, we report on a practical and universal
programmable quantum current generator. We demonstrate that currents generated
in the milliampere range are quantized in terms of
( is the Josephson frequency) with a measurement uncertainty of
. This new quantum current source, able to deliver such accurate
currents down to the microampere range, can greatly improve the current
measurement traceability, as demonstrated with the calibrations of digital
ammeters. Beyond, it opens the way to further developments in metrology and in
fundamental physics, such as a quantum multimeter or new accurate comparisons
to single electron pumps.Comment: 15 pages, 4 figure
Present and future of high-temperature superconductor quantum-based voltage standards
This paper presents a brief overview of the current state-of-the-art of Josephson junctions for Quantum-based Voltage Standards fabricated with High-Temperature Superconductors (HTS). A short introduction on the history and technical evolution of Low Temperature Superconductors (LTS) technology is provided for non-specialists. Then HTS technology is summarized and discussed in the context of quantum voltage standard applications. Finally, the two most promising technologies: bicrystal and Focused Helium-Ion Beam junctions are discussed with more detail, analyzing strength, limitations and perspectives in both cases
Direct calibration of a true-rms ac voltmeter against a He-free pulsed Josephson standard
Starting from 2019 a new central role is played by quantum standards, owing to the redefined SI, where electrical units are directly linked to the fundamental constants e (elementary charge) and h (Planck constant). Thus, metrologists are nowadays trying to extend the astonishing accuracy attainable in dc measurements to ac and beyond, moving towards calibrations aiming quantum ac voltage generation. Programmable Josephson Voltage Standards are nowadays capable of fulfilling primary metrology requirements only for stepwise-approximated voltage signals up to few hundreds Hz. Pulsed Josephson standards are instead capable of generating arbitrary waveforms at higher frequencies, so are generally called Josephson Arbitrary Waveform Standards (JAWS). Despite of the lower attainable voltage, JAWS are very promising and are the subject of intense research activity. In particular, the capability of generating high spectral purity signals allows high accuracy measurements especially at the low voltage levels (<100 mV rms), which are challenging to be performed by the traditional ac-dc transfer difference using thermal converters. We report in the following about our setup for quantum-based calibrations of a true-rms ac voltmeter with low uncertainty, first results obtained and unsolved issues
Tests of SNIS Josephson Arrays Cryocooler Operation
Cryogen-free operation of is essential to spread applications of superconductivity and is indeed unavoidable in some cases. In electrical metrology applications, higher temperature operation to reduce the refrigerator size and complexity is not yet possible, since arrays of Josephson junctions for voltage standard applications made with high-temperature superconductors are not yet available. The superconductor-normal metal-insulator-superconductor (SNIS) technology developed at INRIM uses low temperature superconductors, but allows operation well above liquid helium temperature. It is thus interesting for application to a compact cryocooled standard. We studied SNIS devices cooled with a closed-cycle refrigerator, both in DC and under RF irradiation. Issues related to thermal design of the apparatus are analyzed. The dependence of RF steps on the number of junctions observed is discussed in detail and interpreted as a consequence of power dissipated inside the chip
Realization of superconducting quantum devices based on tunnel Josephson junctions by micro and nanofabrication techniques
This PhD Thesis is focused on the realization of superconducting quantum devices based on overdamped Nb/Al-AlOx/Nb SNIS (Superconductor - Normal metal - Insulator - Superconductor) tunneling Josephson junctions, interesting for several application fields (voltage metrology, digital electronics, radiation sensors, nanoSQUID, etc.). The challenges faced by quantum electronics and metrology are directing the new generations of devices towards smaller dimensions and higher levels of integration. Taking into account this requirement, the fabrication of SNIS-based devices has been addressed on downscaling the junction dimensions form the micro to the nanoscale. In particular, the effective area of junctions has been reduced exploiting three different lithographic techniques: the optical lithography to realize SNISs for a micrometer resolution, the Electron Beam Lithography (EBL) at the subµm and, finally, the Focused Ion Beam (FIB) sculpting method to achieve nanometer sizes. Specifically, prototypes have been realized exploiting the thin film technology, to guarantee a good control of electrical parameters of junctions, a higher reproducibility of their current-voltage I-V characteristics, and an accurate dimension control. Reliable and simpler fabrication processes have been implemented and validated, and the device downscaling was pursued without affecting the fundamental properties of SNIS junctions such as the non hysteretic I-V response and the skill on generating quantised voltage steps under radiofrequency irradiation.
This work has thereby led to the definition and validation of a new generation of devices and processes down to the nanometer scale, and these approaches represent precious experiences of nanofabrication valuable for new research activities and projects
- …