Ergonomic Chair Design by Fusing Qualitative and Quantitative Criteria using Interactive Genetic Algorithms

This paper emphasizes the necessity of formally bringing qualitative and quantitative criteria of ergonomic design together, and provides a novel complementary design framework with this aim. Within this framework, different design criteria are viewed as optimization objectives; and design solutions are iteratively improved through the cooperative efforts of computer and user. The framework is rooted in multi-objective optimization, genetic algorithms and interactive user evaluation. Three different algorithms based on the framework are developed, and tested with an ergonomic chair design problem. The parallel and multi-objective approaches show promising results in fitness convergence, design diversity and user satisfaction metrics

Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft

In this article, the multi-objective design of a fuzzy logic augmented flight controller for a high performance fighter jet (the Lockheed-Martin F16) is described. A fuzzy logic controller is designed and its membership functions tuned by genetic algorithms in order to design a roll, pitch, and yaw flight controller with enhanced manoeuverability which still retains safety critical operation when combined with a standard inner-loop stabilizing controller. The controller is assessed in terms of pilot effort and thus reduction of pilot fatigue. The controller is incorporated into a six degree of freedom motion base real-time flight simulator, and flight tested by a qualified pilot instructor

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested

Application of Genetic Algorithm in Multi-objective Optimization of an Indeterminate Structure with Discontinuous Space for Support Locations

In this thesis, an indeterminate structure was developed with multiple competing objectives including the equalization of the load distribution among the supports while maximizing the stability of the structure. Two different coding algorithms named “Continuous Method” and “Discretized Method” were used to solve the optimal support locations using Genetic Algorithms (GAs). In continuous method, a continuous solution space was considered to find optimal support locations. The failure of this method to stick to the acceptable optimal solution led towards the development of the second method. The latter approach divided the solution space into rectangular grids, and GAs acted on the index number of the nodal points to converge to the optimality. The average value of the objective function in the discretized method was found to be 0.147 which was almost onethird of that obtained by the continuous method. The comparison based on individual components of the objective function also proved that the proposed method outperformed the continuous method. The discretized method also showed faster convergence to the optima. Three circular discontinuities were added to the structure to make it more realistic and three different penalty functions named flat, linear and non-linear penalty were used to handle the constraints. The performance of the two methods was observed with the penalty functions while increasing the radius of the circles by 25% and 50% which showed no significant difference. Later, the discretized method was coded to eliminate the discontinuous area from the solution space which made the application of the penalty functions redundant. A paired t-test (α=5%) showed no statistical difference between these two methods. Finally, to make the proposed method compatible with irregular shaped discontinuous areas, “FEA Integrated Coded Discretized Method (FEAICDM)” was developed. The manual elimination of the infeasible areas from the candidate surface was replaced by the nodal points of the mesh generated by Solid Works. A paired t-test (α=5%) showed no statistical difference between these two methods. Though FEAICDM was applied only to a class of problem, it can be concluded that FEAICDM is more robust and efficient than the continuous method for a class of constrained optimization problem

Strategies for multiobjective genetic algorithm development: Application to optimal batch plant design in process systems engineering

This work deals with multiobjective optimization problems using Genetic Algorithms (GA). A MultiObjective GA (MOGA) is proposed to solve multiobjective problems combining both continuous and discrete variables. This kind of problem is commonly found in chemical engineering since process design and operability involve structural and decisional choices as well as the determination of operating conditions. In this paper, a design of a basic MOGA which copes successfully with a range of typical chemical engineering optimization problems is considered and the key points of its architecture described in detail. Several performance tests are presented, based on the influence of bit ranging encoding in a chromosome. Four mathematical functions were used as a test bench. The MOGA was able to find the optimal solution for each objective function, as well as an important number of Pareto optimal solutions. Then, the results of two multiobjective case studies in batch plant design and retrofit were presented, showing the flexibility and adaptability of the MOGA to deal with various engineering problems

Optimum and Robust Design of Fibre-Reinforced Hybrid Composites with Manufacture Related Uncertainties

In this research, different methods are presented for design and multi-objective optimization of laminated hybrid composites when design variables are not deterministic due to manufacture related uncertainties. Since, flexural properties are more affected by hybridization of fibres, this research has focused on the design and optimization of laminated hybrid composites under flexural load. Robustness and hybrid effect are investigated with optimal and robust designs for carbon and glass fibre reinforced epoxy composites being presented

Design optimization of TBM disc cutters for different geological conditions

A novel optimization methodology for the disc cutter designs of tunnel boring machines (TBM) was presented. To fully understand the characteristics and performance of TBM cutters, a comprehensive list of performance parameters were investigated, including maximum equivalent stress and strain, specific energy and wear life which were closely related to the cutting forces and profile geometry of the cutter rings. A systematic method was employed to evaluate an overall performance index by incorporating objectives at all possible geological conditions. The Multi-objective & Multi-geologic Conditions Optimization (MMCO) program was then developed, which combined the updating of finite element model, system evaluation, finite element solving, post-processing and optimization algorithm. Finally, the MMCO was used to optimize the TBM cutters used in a TBM tunnel project in China. The results show that the optimization significantly improves the working performances of the cutters under all geological conditions considered