Experimental validation of an optical and thermal model of a Linear Fresnel Collector

2nd European Conference on Polygeneration – 30th March 1st April, 2011– Tarragona, SpainThis paper describes the design and validation of a mathematical model for a solar Fresnel collector. The function of the model is to simulate the optical and thermal dynamics of a Fresnel system for heating water. The model is validated using real data gathered from a cooling plant with double effect absorption chiller located in the School of Engineering University of Seville, Spain (Experimental cooling plant is also described in the paper). Comparison of calculated and plant measured data shows that the error is lower than 3% in the optical model and within 7% in the thermal model. The model uses a new approach to include a solar tracking mirror mechanism in one axis. This tracking has been designed to maximise the reception of available solar radiation by the absorption pipe. The thermal model used is based around classical models for solar receivers and it is validated with real operating data gathered from a supervisor system. The Fresnel model has been designed with sufficient flexibility to consider different geometries and thermal parameters, and may be used to simulate the performance of a proposed Fresnel collector system at any location

Integrated gasifier combined cycle polygeneration system to produce liquid hydrogen

An integrated gasifier combined cycle (IGCC) system which simultaneously produces electricity, process steam, and liquid hydrogen was evaluated and compared to IGCC systems which cogenerate electricity and process steam. A number of IGCC plants, all employing a 15 MWe has turbine and producing from 0 to 20 tons per day of liquid hydrogen and from 0 to 20 MWt of process steam were considered. The annual revenue required to own and operate such plants was estimated to be significantly lower than the potential market value of the products. The results indicate a significant potential economic benefit to configuring IGCC systems to produce a clean fuel in addition to electricity and process steam in relatively small industrial applications

Optimization of a small-scale polygeneration system for a household in Turkey

With environmental concerns, alternative solutions for generating electricity while decreasing the consumption of fossil fuels have gained a great importance. Polygeneration is one of these solutions which is also capable to increase the technical performance of electricity generation. Polygeneration systems are available in large scale, medium scale and small scale. This study focuses on small scale polygeneration systems specifically for residential applications. Type and size of the components and the system’s operational strategy plays a significant role in polygeneration system design as these factors affect the system cost and also environmental impacts. This study aims to propose a guide for component selection, sizing and addressing a suitable operational strategy for a predefined system configuration. Decision making criteria is defined for component selection by a comprehensive literature review. Internal combustion engines, Stirling engines, micro gas turbines and fuel cells are investigated within these criteria. This provides the user an insight on component selection. When combined with factors such as market conditions, location and especially household demand profile, a selection can easily be made by the customer. For component sizing and operational strategy, a model has been implemented in Matlab. A baseline case model with a predefined system configuration and operational strategy was defined. The baseline case system includes a prime mover, a back-up auxiliary boiler, a vapor compression refrigeration chiller, a thermal energy storage and solar thermal collectors for the domestic hot water demand. The operational strategy is defined as thermal load following. For the case study, this model was altered for different cases with alterations on the operational strategy and the system configuration in order to identify the optimal solution for the user where the total annual cost is minimized while satisfying all kinds of end-use demands of a single-family household in Ankara, Turkey. The results also give insights on the effect of having solar thermal collectors and a thermal energy storage coupled with a CHP unit on the overall system

A methodology for designing flexible multi-generation systems

An FMG (flexible multi-generation system) consists of integrated and flexibly operated facilities that provide multiple links between the various layers of the energy system. FMGs may facilitate integration and balancing of fluctuating renewable energy sources in the energy system in a cost- and energy efficient way, thereby playing an important part in smart energy systems. The development of efficient FMGs requires systematic optimization approaches. This study presents a novel, generic methodology for designing FMGs that facilitates quick and reliable pre-feasibility analyses. The methodology is based on consideration of the following points: Selection, location and dimensioning of processes; systematic heat and mass integration; flexible operation optimization with respect to both short-term market fluctuations and long-term energy system development; global sensitivity and uncertainty analysis; biomass supply chains; variable part-load performance; and multi-objective optimization considering economic and environmental performance. Tested in a case study, the methodology is proved effective in screening the solution space for efficient FMG designs, in assessing the importance of parameter uncertainties and in estimating the likely performance variability for promising designs. The results of the case study emphasize the importance of considering systematic process integration when developing smart energy systems. (C) 2016 Elsevier Ltd. All rights reserved

Biomass-fired combined heating, cooling, and power for small scale applications – A review

The growing demand for energy and the accelerating threats from climate change call for innovative and sustainable solutions to decrease dependency on fossil fuels. Biomass -based, small-scale Combined Cooling, Heating and Power (CCHP) systems are one of these solutions, because they can satisfy the energy demands of the consumer with enhanced flexibility, l ower losses, less costs and less environmental pollution as compared to centralized facilities. Due to recent advances in several scientific subfields with relevance to small-scale CCHP, a rapidly increasing amount of literature is now available. Therefore, a structural overview is essential for engineers and researchers. This paper presents a review of the current investigations in small-scale CCHP systems covering biomass-fired concepts and solar extensions. To this end, critical system components are described and analysed according to their specific advantages and drawbacks. Recent case studies have been collected and key findings are highlighted according to each type of prime mover. The results indicate a scientific bias towards the economic viability of such systems and the need for real-life and experiment system data. However, the potential of biomass-fired CCHP systems and of such systems with solar extensions has clearly been recognised. Based on the results, future policy implementations should focus on fostering such systems in areas with high energy costs and to increase energy resilience in developed regions. Additionally research and industry applying novel prime mover technologies should be financially supported.Postprint (author's final draft

Scheduling of Multiple Chillers in Trigeneration Plants

The scheduling of both absorption cycle and vapour compression cycle chillers in trigeneration plants is investigated in this work. Many trigeneration plants use absorption cycle chillers only but there are potential performance advantages to be gained by using a combination of absorption and compression chillers especially in situations where the building electrical demand to be met by the combined heat and power (CHP) plant is variable. Simulation models of both types of chillers are developed together with a simple model of a variable-capacity CHP engine developed by curve-fitting to supplier’s data. The models are linked to form an optimisation problem in which the contribution of both chiller types is determined at a maximum value of operating cost (or carbon emission) saving. Results show that an optimum operating condition arises at moderately high air conditioning demands and moderately low power demand when the air conditioning demand is shared between both chillers, all recovered heat is utilised, and the contribution arising from the compression chiller results in an increase in CHP power generation and, hence, engine efficiency