Adaptive Beamforming and Adaptive Modulation-Assisted Network Performance of Multiuser Detection-Aided FDD and TDD CDMA Systems

The network performance of a frequency division duplex and time division duplex (TDD) code division multiple access (CDMA)-based system is investigated using system parameters similar to those of the Universal Mobile Telecommunication System. The new call blocking and call dropping probabilities, the probability of low-quality access, and the required average transmit power are quantified both with and without adaptive antenna arrays (AAAs), as well as when subjected to shadow fading. In some of the scenarios investigated, the system’s user capacity is doubled with the advent of adaptive antennas. The employment of adaptive modulation techniques in conjunction with AAAs resulted in further significant network capacity gains. This is particularly so in the context of TDD CDMA, where the system’s capacity becomes poor without adaptive antennas and adaptive modulation owing to the high base station (BS) to BS interference inflicted as a consequence of potentially using all time slots in both the uplink and downlink of the emerging wireless Internet. Index Terms—Adaptive beamforming, adaptive modulation, code division multiple access (CDMA) systems, Universal Mobile Telecommunication System Terrestrial Radio Access (UTRA), wireless network performance

MULTfflOP MOBILE CELLULAR NETWORK

Code Division Multiple Access (CDMA) system capacity is interference limited. Distance of the mobile station (MS) to the base station (BS) affects the capacity and interference of a cellular network system. Relaying is to shorter the distance between BS and MS by adding a relay station (RS) between them. Transmission power is smaller due to shorter distance and thus improves the capacityof the CDMAsystem due to reduction in interference. Relaying can be done by using fixed relay station or mobile relay station. Both objectives are to improve the capacity and reduce interference but they are different since fixed relay station is constructed on land or building while mobile relay station is additional features added into mobile phones. This project shows the benefits of multihop with mobile relay station which improve the interference by relaying compared to thesystem without relaying

Device-to-Device Communication and Multihop Transmission for Future Cellular Networks

The next generation wireless networks i.e. 5G aim to provide multi-Gbps data traffic, in order to satisfy the increasing demand for high-definition video, among other high data rate services, as well as the exponential growth in mobile subscribers. To achieve this dramatic increase in data rates, current research is focused on improving the capacity of current 4G network standards, based on Long Term Evolution (LTE), before radical changes are exploited which could include acquiring additional/new spectrum. The LTE network has a reuse factor of one; hence neighbouring cells/sectors use the same spectrum, therefore making the cell edge users vulnerable to inter-cell interference. In addition, wireless transmission is commonly hindered by fading and pathloss. In this direction, this thesis focuses on improving the performance of cell edge users in LTE and LTE-Advanced (LTE-A) networks by initially implementing a new Coordinated Multi-Point (CoMP) algorithm to mitigate cell edge user interference. Subsequently Device-to-Device (D2D) communication is investigated as the enabling technology for maximising Resource Block (RB) utilisation in current 4G and emerging 5G networks. It is demonstrated that the application, as an extension to the above, of novel power control algorithms, to reduce the required D2D TX power, and multihop transmission for relaying D2D traffic, can further enhance network performance. To be able to develop the aforementioned technologies and evaluate the performance of new algorithms in emerging network scenarios, a beyond-the-state-of-the-art LTE system-level simulator (SLS) was implemented. The new simulator includes Multiple-Input Multiple-Output (MIMO) antenna functionalities, comprehensive channel models (such as Wireless World initiative New Radio II i.e. WINNER II) and adaptive modulation and coding schemes to accurately emulate the LTE and LTE-A network standards. Additionally, a novel interference modelling scheme using the ‘wrap around’ technique was proposed and implemented that maintained the topology of flat surfaced maps, allowing for use with cell planning tools while obtaining accurate and timely results in the SLS compared to the few existing platforms. For the proposed CoMP algorithm, the adaptive beamforming technique was employed to reduce interference on the cell edge UEs by applying Coordinated Scheduling (CoSH) between cooperating cells. Simulation results show up to 2-fold improvement in terms of throughput, and also shows SINR gain for the cell edge UEs in the cooperating cells. Furthermore, D2D communication underlaying the LTE network (and future generation of wireless networks) was investigated. The technology exploits the proximity of users in a network to achieve higher data rates with maximum RB utilisation (as the technology reuses the cellular RB simultaneously), while taking some load off the Evolved Node B (eNB) i.e. by direct communication between User Equipment (UE). Simulation results show that the proximity and transmission power of D2D transmission yields high performance gains for a D2D receiver, which was demonstrated to be better than that of cellular UEs with better channel conditions or in close proximity to the eNB in the network. The impact of interference from the simultaneous transmission however impedes the achievable data rates of cellular UEs in the network, especially at the cell edge. Thus, a power control algorithm was proposed to mitigate the impact of interference in the hybrid network (network consisting of both cellular and D2D UEs). It was implemented by setting a minimum SINR threshold so that the cellular UEs achieve a minimum performance, and equally a maximum SINR threshold to establish fairness for the D2D transmission as well. Simulation results show an increase in the cell edge throughput and notable improvement in the overall SINR distribution of UEs in the hybrid network. Additionally, multihop transmission for D2D UEs was investigated in the hybrid network: traditionally, the scheme is implemented to relay cellular traffic in a homogenous network. Contrary to most current studies where D2D UEs are employed to relay cellular traffic, the use of idle nodes to relay D2D traffic was implemented uniquely in this thesis. Simulation results show improvement in D2D receiver throughput with multihop transmission, which was significantly better than that of the same UEs performance with equivalent distance between the D2D pair when using single hop transmission

Long Term Evolution and its Handover Mechanism

LTE technology wascommercially introduced byTeliaSonera in Norway in December2009. The abbreviation of LTE is Long Term Evolution.It is the third generation partnership project(3GPP).It is also developed widely by international organization.LTE is developed to support both the time division duplex technology(TDD) as well as historical information. The Architecture of high level network technology LTE is obtained from the three main point’s 1.The user Equipment, 2.The Evolved UMTS Terrestrial Radio Access Network(E_UTRAN)and 3rd is the (EPC)Evolved PacketCore.Handover mechanism is published to be used in 3GPP LTE in orderto reduce the complexity of LTE Network architecture.The Standards isdeveloped by3GPP and is specie in its release 8 document series, LTE is the natural upgrade path forbid GSM/UMTS networks and CDMA200 networks.A critical task for operators is to plain LTE network layer independently without losing the cooperation

MULTfflOP MOBILE CELLULAR NETWORK

Code Division Multiple Access (CDMA) system capacity is interference limited. Distance of the mobile station (MS) to the base station (BS) affects the capacity and interference of a cellular network system. Relaying is to shorter the distance between BS and MS by adding a relay station (RS) between them. Transmission power is smaller due to shorter distance and thus improves the capacityof the CDMAsystem due to reduction in interference. Relaying can be done by using fixed relay station or mobile relay station. Both objectives are to improve the capacity and reduce interference but they are different since fixed relay station is constructed on land or building while mobile relay station is additional features added into mobile phones. This project shows the benefits of multihop with mobile relay station which improve the interference by relaying compared to thesystem without relaying

TD-SCDMA Relay Networks

PhDWhen this research was started, TD-SCDMA (Time Division Synchronous Code Division Multiple Access) was still in the research/ development phase, but now, at the time of writing this thesis, it is in commercial use in 10 large cities in China including Beijing and Shang Hai. In all of these cities HSDPA is enabled. The roll-out of the commercial deployment is progressing fast with installations in another 28 cities being underway now. However, during the pre-commercial TD-SCDM trail in China, which started from year 2006, some interference problems have been noticed especially in the network planning and initialization phases. Interference is always an issue in any network and the goal of the work reported in this thesis is to improve network coverage and capacity in the presence of interference. Based on an analysis of TD-SCDMA issues and how network interference arises, this thesis proposes two enhancements to the network in addition to the standard N-frequency technique. These are (i) the introduction of the concentric circle cell concept and (ii) the addition of a relay network that makes use of other users at the cell boundary. This overall approach not only optimizes the resilience to interference but increases the network coverage without adding more Node Bs. Based on the cell planning parameters from the research, TD-SCDMA HSDPA services in dense urban area and non-HSDPA services in rural areas were simulated to investigate the network performance impact after introducing the relay network into a TD-SCDMA network. The results for HSDPA applications show significant improvement in the TDSCDMA relay network both for network capacity and network interference aspects compared to standard TD-SCDMA networks. The results for non- HSDPA service show that although the network capacity has not changed after adding in the relay network (due to the code limitation in TD-SCDMA), the TD-SCDMA relay network has better interference performance and greater coverage

Performance evaluation of mobile relays in CDMA system

In this thesis we consider the uplink direction of DS-CDMA (Direct Sequence, Code Division Multiple Access) network with multihop transmission. For the purpose, we discussed simple conditions by which we can understand whether single hop or multihop is better. One promising direction that the current wireless network moves toward is multihopping that allows mobiles to relay packets of other mobiles to their destinations. A major reason for adopting such multihopping is in capacity and range enhancement, which may pay off its increased complexity. Here, we focus on the non-real-time (NRT) services in the uplink of a DS-CDMA cell. Mobiles are moving around the cell, trying to send NRT packets to the base station, possibly by multihopping. Our goal is to derive a per-hop based multihop scheduling algorithm that is easily applicable in a cellular network with high mobility. For the purpose, we utilize the similarity between the basketball game and our multihop uplink packet scheduling problem. By regarding players, the basket and the ball as mobiles, the base station and data packet, respectively, we can mimic passing (multihopping) patterns of the basketball players. A major difference between the two is that in the multihopping problem, there are many packets (balls) while in the basket ball game, there is only one ball to shoot into the basket

Analyzing Delay in Wireless Multi-hop Heterogeneous Body Area Networks

With increase in ageing population, health care market keeps growing. There is a need for monitoring of health issues. Wireless Body Area Network (WBAN) consists of wireless sensors attached on or inside human body for monitoring vital health related problems e.g, Electro Cardiogram (ECG), Electro Encephalogram (EEG), ElectronyStagmography (ENG) etc. Due to life threatening situations, timely sending of data is essential. For data to reach health care center, there must be a proper way of sending data through reliable connection and with minimum delay. In this paper transmission delay of different paths, through which data is sent from sensor to health care center over heterogeneous multi-hop wireless channel is analyzed. Data of medical related diseases is sent through three different paths. In all three paths, data from sensors first reaches ZigBee, which is the common link in all three paths. Wireless Local Area Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX), Universal Mobile Telecommunication System (UMTS) are connected with ZigBee. Each network (WLAN, WiMAX, UMTS) is setup according to environmental conditions, suitability of device and availability of structure for that device. Data from these networks is sent to IP-Cloud, which is further connected to health care center. Delay of data reaching each device is calculated and represented graphically. Main aim of this paper is to calculate delay of each link in each path over multi-hop wireless channel.Comment: arXiv admin note: substantial text overlap with arXiv:1208.240