Eyeriss v2: A Flexible Accelerator for Emerging Deep Neural Networks on Mobile Devices

A recent trend in DNN development is to extend the reach of deep learning applications to platforms that are more resource and energy constrained, e.g., mobile devices. These endeavors aim to reduce the DNN model size and improve the hardware processing efficiency, and have resulted in DNNs that are much more compact in their structures and/or have high data sparsity. These compact or sparse models are different from the traditional large ones in that there is much more variation in their layer shapes and sizes, and often require specialized hardware to exploit sparsity for performance improvement. Thus, many DNN accelerators designed for large DNNs do not perform well on these models. In this work, we present Eyeriss v2, a DNN accelerator architecture designed for running compact and sparse DNNs. To deal with the widely varying layer shapes and sizes, it introduces a highly flexible on-chip network, called hierarchical mesh, that can adapt to the different amounts of data reuse and bandwidth requirements of different data types, which improves the utilization of the computation resources. Furthermore, Eyeriss v2 can process sparse data directly in the compressed domain for both weights and activations, and therefore is able to improve both processing speed and energy efficiency with sparse models. Overall, with sparse MobileNet, Eyeriss v2 in a 65nm CMOS process achieves a throughput of 1470.6 inferences/sec and 2560.3 inferences/J at a batch size of 1, which is 12.6x faster and 2.5x more energy efficient than the original Eyeriss running MobileNet. We also present an analysis methodology called Eyexam that provides a systematic way of understanding the performance limits for DNN processors as a function of specific characteristics of the DNN model and accelerator design; it applies these characteristics as sequential steps to increasingly tighten the bound on the performance limits.Comment: accepted for publication in IEEE Journal on Emerging and Selected Topics in Circuits and Systems. This extended version on arXiv also includes Eyexam in the appendi

MGSim - Simulation tools for multi-core processor architectures

MGSim is an open source discrete event simulator for on-chip hardware components, developed at the University of Amsterdam. It is intended to be a research and teaching vehicle to study the fine-grained hardware/software interactions on many-core and hardware multithreaded processors. It includes support for core models with different instruction sets, a configurable multi-core interconnect, multiple configurable cache and memory models, a dedicated I/O subsystem, and comprehensive monitoring and interaction facilities. The default model configuration shipped with MGSim implements Microgrids, a many-core architecture with hardware concurrency management. MGSim is furthermore written mostly in C++ and uses object classes to represent chip components. It is optimized for architecture models that can be described as process networks.Comment: 33 pages, 22 figures, 4 listings, 2 table

OrthoNoC: a broadcast-oriented dual-plane wireless network-on-chip architecture

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksOn-chip communication remains as a key research issue at the gates of the manycore era. In response to this, novel interconnect technologies have opened the door to new Network-on-Chip (NoC) solutions towards greater scalability and architectural flexibility. Particularly, wireless on-chip communication has garnered considerable attention due to its inherent broadcast capabilities, low latency, and system-level simplicity. This work presents ORTHONOC, a wired-wireless architecture that differs from existing proposals in that both network planes are decoupled and driven by traffic steering policies enforced at the network interfaces. With these and other design decisions, ORTHONOC seeks to emphasize the ordered broadcast advantage offered by the wireless technology. The performance and cost of ORTHONOC are first explored using synthetic traffic, showing substantial improvements with respect to other wired-wireless designs with a similar number of antennas. Then, the applicability of ORTHONOC in the multiprocessor scenario is demonstrated through the evaluation of a simple architecture that implements fast synchronization via ordered broadcast transmissions. Simulations reveal significant execution time speedups and communication energy savings for 64-threaded benchmarks, proving that the value of ORTHONOC goes beyond simply improving the performance of the on-chip interconnect.Peer ReviewedPostprint (author's final draft

A Control-based Methodology for Power-performance Optimization in NoCs Exploiting DVFS

Networks-on-Chip (NoCs) are considered a viable solution to fully exploit the computational power of multi- and many-cores, but their non negligible power consumption requires ad hoc power-performance design methodologies. In this perspective, several proposals exploited the possibility to dynamically tune voltage and frequency for the interconnect, taking steps from traditional CPU-based power management solutions. However, the impact of the actuators, i.e. the limited range of frequencies for a PLL (Phase Locked Loop) or the time to increase voltage and frequency for a Dynamic Voltage and Frequency Scaling (DVFS) modules, are often not carefully accounted for, thus overestimating the benefits. This paper presents a control-based methodology for the NoC power-performance optimization exploiting the Dynamic Frequency Scaling (DFS). Both timing and power overheads of the actuators are considered, thanks to an ad hoc simulation framework. Moreover the proposed methodology eventually allows for user and/or OS interactions to change between different high level power-performance modes, i.e. to trigger performance oriented or power saving system behaviors. Experimental validation considered a 16-core architecture comparing our proposal with different settings of threshold-based policies. We achieved a speedup up to 3 for the timing and a reduction up to 33.17% of the power ∗ time product against the best threshold-based policy. Moreover, our best control-based scheme provides an averaged power-performance product improvement of 16.50% and 34.79% against the best and the second considered threshold-based policy setting

A DVFS Cycle Accurate Simulation Framework with Asynchronous NoC Design for Power-Performance Optimizations

Network-on-Chip (NoC) is a flexible and scalable solution to interconnect multi-cores, with a strong influence on the performance of the whole chip. On-chip network affects also the overall power consumption, thus requiring accurate early-stage estimation and optimization methodologies. In this scenario, the Dynamic Voltage Frequency Scaling (DVFS) technique have been proposed both for CPUs and NoCs. The promise is to be a flexible and scalable way to jointly optimize power-performance, addressing both static and dynamic power sources. Being simulation a de-facto prime solution to explore novel multi-core architectures, a reliable full system analysis requires to integrate in the toolchain accurate timing and power models for the DVFS block and for the resynchronization logic between different Voltage and Frequency Islands (VFIs). In such a way, a more accurate validation of novel optimization methodologies which exploit such actuator is possible, since both architectural and actuator overheads are considered at the same time. This work proposes a complete cycle accurate framework for multi-core design supporting Global Asynchronous Local Synchronous (GALS) NoC design and DVFS actuators for the NoC. Furthermore, static and dynamic frequency assignment is possible with or without the use of the voltage regulator. The proposed framework sits on accurate analytical timing model and SPICE-based power measures, providing accurate estimates of both timing and power overheads of the power control mechanisms

StochSoCs: High performance biocomputing simulations for large scale Systems Biology

The stochastic simulation of large-scale biochemical reaction networks is of great importance for systems biology since it enables the study of inherently stochastic biological mechanisms at the whole cell scale. Stochastic Simulation Algorithms (SSA) allow us to simulate the dynamic behavior of complex kinetic models, but their high computational cost makes them very slow for many realistic size problems. We present a pilot service, named WebStoch, developed in the context of our StochSoCs research project, allowing life scientists with no high-performance computing expertise to perform over the internet stochastic simulations of large-scale biological network models described in the SBML standard format. Biomodels submitted to the service are parsed automatically and then placed for parallel execution on distributed worker nodes. The workers are implemented using multi-core and many-core processors, or FPGA accelerators that can handle the simulation of thousands of stochastic repetitions of complex biomodels, with possibly thousands of reactions and interacting species. Using benchmark LCSE biomodels, whose workload can be scaled on demand, we demonstrate linear speedup and more than two orders of magnitude higher throughput than existing serial simulators.Comment: The 2017 International Conference on High Performance Computing & Simulation (HPCS 2017), 8 page

Robust and Traffic Aware Medium Access Control Mechanisms for Energy-Efficient mm-Wave Wireless Network-on-Chip Architectures

To cater to the performance/watt needs, processors with multiple processing cores on the same chip have become the de-facto design choice. In such multicore systems, Network-on-Chip (NoC) serves as a communication infrastructure for data transfer among the cores on the chip. However, conventional metallic interconnect based NoCs are constrained by their long multi-hop latencies and high power consumption, limiting the performance gain in these systems. Among, different alternatives, due to the CMOS compatibility and energy-efficiency, low-latency wireless interconnect operating in the millimeter wave (mm-wave) band is nearer term solution to this multi-hop communication problem. This has led to the recent exploration of millimeter-wave (mm-wave) wireless technologies in wireless NoC architectures (WiNoC). To realize the mm-wave wireless interconnect in a WiNoC, a wireless interface (WI) equipped with on-chip antenna and transceiver circuit operating at 60GHz frequency range is integrated to the ports of some NoC switches. The WIs are also equipped with a medium access control (MAC) mechanism that ensures a collision free and energy-efficient communication among the WIs located at different parts on the chip. However, due to shrinking feature size and complex integration in CMOS technology, high-density chips like multicore systems are prone to manufacturing defects and dynamic faults during chip operation. Such failures can result in permanently broken wireless links or cause the MAC to malfunction in a WiNoC. Consequently, the energy-efficient communication through the wireless medium will be compromised. Furthermore, the energy efficiency in the wireless channel access is also dependent on the traffic pattern of the applications running on the multicore systems. Due to the bursty and self-similar nature of the NoC traffic patterns, the traffic demand of the WIs can vary both spatially and temporally. Ineffective management of such traffic variation of the WIs, limits the performance and energy benefits of the novel mm-wave interconnect technology. Hence, to utilize the full potential of the novel mm-wave interconnect technology in WiNoCs, design of a simple, fair, robust, and efficient MAC is of paramount importance. The main goal of this dissertation is to propose the design principles for robust and traffic-aware MAC mechanisms to provide high bandwidth, low latency, and energy-efficient data communication in mm-wave WiNoCs. The proposed solution has two parts. In the first part, we propose the cross-layer design methodology of robust WiNoC architecture that can minimize the effect of permanent failure of the wireless links and recover from transient failures caused by single event upsets (SEU). Then, in the second part, we present a traffic-aware MAC mechanism that can adjust the transmission slots of the WIs based on the traffic demand of the WIs. The proposed MAC is also robust against the failure of the wireless access mechanism. Finally, as future research directions, this idea of traffic awareness is extended throughout the whole NoC by enabling adaptiveness in both wired and wireless interconnection fabric

Energy-efficient electrical and silicon-photonic networks in many core systems

Thesis (Ph.D.)--Boston UniversityDuring the past decade, the very large scale integration (VLSI) community has migrated towards incorporating multiple cores on a single chip to sustain the historic performance improvement in computing systems. As the core count continuously increases, the performance of network-on-chip (NoC), which is responsible for the communication between cores, caches and memory controllers, is increasingly becoming critical for sustaining the performance improvement. In this dissertation, we propose several methods to improve the energy efficiency of both electrical and silicon-photonic NoCs. Firstly, for electrical NoC, we propose a flow control technique, Express Virtual Channel with Taps (EVC-T), to transmit both broadcast and data packets efficiently in a mesh network. A low-latency notification tree network is included to maintain t he order of broadcast packets. The EVC-T technique improves the NoC latency by 24% and the system energy efficiency in terms of energy-delay product (EDP) by 13%. In the near future, the silicon-photonic links are projected to replace the electrical links for global on-chip communication due to their lower data-dependent power and higher bandwidth density, but the high laser power can more than offset these advantages. Therefore, we propose a silicon-photonic multi-bus NoC architecture and a methodology that can reduce the laser power by 49% on average through bandwidth reconfiguration at runtime based on the variations in bandwidth requirements of applications. We also propose a technique to reduce the laser power by dynamically activating/deactivating the 12 cache banks and switching ON/ OFF the corresponding silicon-photonic links in a crossbar NoC. This cache-reconfiguration based technique can save laser power by 23.8% and improves system EDP by 5.52% on average. In addition, we propose a methodology for placing and sharing on-chip laser sources by jointly considering the bandwidth requirements, thermal constraints and physical layout constraints. Our proposed methodology for placing and sharing of on-chip laser sources reduces laser power. In addition to reducing the laser power to improve the energy efficiency of silicon-photonic NoCs, we propose to leverage the large bandwidth provided by silicon-photonic NoC to share computing resources. The global sharing of floating-point units can save system area by 13.75% and system power by 10%