6,222 research outputs found
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
A Fair and Efficient Packet Scheduling Scheme for IEEE 802.16 Broadband Wireless Access Systems
This paper proposes a fair and efficient QoS scheduling scheme for IEEE
802.16 BWA systems that satisfies both throughput and delay guarantee to
various real and non-real time applications. The proposed QoS scheduling scheme
is compared with an existing QoS scheduling scheme proposed in literature in
recent past. Simulation results show that the proposed scheduling scheme can
provide a tight QoS guarantee in terms of delay, delay violation rate and
throughput for all types of traffic as defined in the WiMAX standard, thereby
maintaining the fairness and helps to eliminate starvation of lower priority
class services. Bandwidth utilization of the system and fairness index of the
resources are also encountered to validate the QoS provided by our proposed
scheduling scheme
Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites
Satellite Communication systems are a promising solution to extend and
complement terrestrial networks in unserved or under-served areas. This aspect
is reflected by recent commercial and standardisation endeavours. In
particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G,
Non-Terrestrial Networks aimed at deploying satellite systems either as a
stand-alone solution or as an integration to terrestrial networks in mobile
broadband and machine-type communication scenarios. However, typical satellite
channel impairments, as large path losses, delays, and Doppler shifts, pose
severe challenges to the realisation of a satellite-based NR network. In this
paper, based on the architecture options currently being discussed in the
standardisation fora, we discuss and assess the impact of the satellite channel
characteristics on the physical and Medium Access Control layers, both in terms
of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB)
and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis
shows that the main technical challenges are related to the PHY/MAC procedures,
in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic
Repeat reQuest (HARQ) and, depending on the considered service and
architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
- …