Performance analysis of massive multiple input multiple output for high speed railway

This paper analytically reviews the performance of massive multiple input multiple output (MIMO) system for communication in highly mobility scenarios like high speed Railways. As popularity of high speed train increasing day by day, high data rate wireless communication system for high speed train is extremely required. 5G wireless communication systems must be designed to meet the requirement of high speed broadband services at speed of around 500 km/h, which is the expected speed achievable by HSR systems, at a data rate of 180 Mbps or higher. Significant challenges of high mobility communications are fast time-varying fading, channel estimation errors, doppler diversity, carrier frequency offset, inter carrier interference, high penetration loss and fast and frequent handovers. Therefore, crucial requirement to design high mobility communication channel models or systems prevails. Recently, massive MIMO techniques have been proposed to significantly improve the performance of wireless networks for upcoming 5G technology. Massive MIMO provide high throughput and high energy efficiency in wireless communication channel. In this paper, key findings, challenges and requirements to provide high speed wireless communication onboard the high speed train is pointed out after thorough literature review. In last, future research scope to bridge the research gap by designing efficient channel model by using massive MIMO and other optimization method is mentioned

Mobile Broadband Scaling and Enhancement for Fast Moving Trains

Internet is an important part of our life, whether traveling or at home. The broadband services available at home are reliable and are usually at constant speed. The people traveling especially in fast moving trains are at higher mobility and may be moving in areas of less connectivity, and providing a reliable service to them is a challenging task. One possible solution to this is to provide communication through an on-board Wi-Fi, which takes services from a central Wi-Fi situated in the middle of the train, which is connected to cellular radio service long-term evolution for railways. The network consists of LTE-R which is dedicated for railway communication only, a public mobile network, which supports LTE-R in the areas of no coverage and high traffic conditions and a public safety network in emergency conditions. The work is verified with the help of simulations on MATLAB, considering different traffic scenarios. The BSs placed at a distance of 2.5 Km and antenna height used is 45 m are equipped with 3G and 4G interfaces, a universal mobile telecommunications services (UMTS) and radio access network (RAN). The UMTS interface is used for voice services and handover when spectrum available in the next cell is less

Predictor Antenna Systems: Exploiting Channel State Information for Vehicle Communications

Vehicle communication is one of the most important use cases in the fifth generation of wireless networks (5G). The growing demand for quality of service (QoS) characterized by performance metrics, such as spectrum efficiency, peak data rate, and outage probability, is mainly limited by inaccurate prediction/estimation of channel state information (CSI) of the rapidly changing environment around moving vehicles. One way to increase the prediction horizon of CSI in order to improve the QoS is deploying predictor antennas (PAs). A PA system consists of two sets of antennas typically mounted on the roof of a vehicle, where the PAs positioned at the front of the vehicle are used to predict the CSI observed by the receive antennas (RAs) that are aligned behind the PAs. In realistic PA systems, however, the actual benefit is affected by a variety of factors, including spatial mismatch, antenna utilization, temporal correlation of scattering environment, and CSI estimation error. This thesis investigates different resource allocation schemes for the PA systems under practical constraints.Comment: Licentiate thesis, Chalmers University of Technolog

Predictor Antenna Systems: Exploiting Channel State Information for Vehicle Communications

Vehicle communication is one of the most important use cases in the fifth generation of wireless networks (5G).\ua0 The growing demand for quality of service (QoS) characterized by performance metrics, such as spectrum efficiency, peak data rate, and outage probability, is mainly limited by inaccurate prediction/estimation of channel state information (CSI) of the rapidly changing environment around moving vehicles. One way to increase the prediction horizon of CSI in order to improve the QoS is deploying predictor antennas (PAs).\ua0 A PA system consists of two sets of antennas typically mounted on the roof of a vehicle, where the PAs positioned at the front of the vehicle are used to predict the CSI observed by the receive antennas (RAs) that are aligned behind the PAs. In realistic PA systems, however, the actual benefit is affected by a variety of factors, including spatial mismatch, antenna utilization, temporal correlation of scattering environment, and CSI estimation error. This thesis investigates different resource allocation schemes for the PA systems under practical constraints, with main contributions summarized as follows.First, in Paper A, we study the PA system in the presence of the so-called spatial mismatch problem, i.e., when the channel observed by the PA is not exactly the same as the one experienced by the RA. We derive closed-form expressions for the throughput-optimized rate adaptation, and evaluate the system performance in various temporally-correlated conditions for the scattering environment. Our results indicate that PA-assisted adaptive rate adaptation leads to a considerable performance improvement, compared to the cases with no rate adaptation. Then, to simplify e.g., various integral calculations as well as different operations such as parameter optimization, in Paper B, we propose a semi-linear approximation of the Marcum Q-function, and apply the proposed approximation to the evaluation of the PA system. We also perform deep analysis of the effect of various parameters such as antenna separation as well as CSI estimation error. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy.The second part of the thesis focuses on improving the spectral efficiency of the PA system by involving the PA into data transmission. In Paper C, we analyze the outage-limited performance of PA systems using hybrid automatic repeat request (HARQ). With our proposed approach, the PA is used not only for improving the CSI in the retransmissions to the RA, but also for data transmission in the initial round.\ua0 As we show in the analytical and the simulation results, the combination of PA and HARQ protocols makes it possible to improve the spectral efficiency and adapt transmission parameters to mitigate the effect of spatial mismatch

Space-frequency index modulation for combating ICI in intelligent mobility communications

Advanced wireless communications to support high vehicular speeds in the scenario of intelligent mobility have attracted considerable research attentions in both academia and industry. Multi-dimensional index modulation, which exploits transmission media resources for combining the concept of index modulation to achieve higher throughput with lower energy consumption, is regarded as a potential candidate for addressing the challenges in intelligent mobility communications. However, for the multi-dimensional index modulation system used in the mobile environment, the inter-carrier-interference (ICI) imposes a significant adverse impact on the system, especially in the context of multicarrier transmission. Therefore, by focusing on the two-dimensional index modulation system, the ICI impact on space-frequency index modulation is studied in this paper. Thanks to the grouping strategies and the Gaussian approximation to model the ICI, the approximate theoretical bounds for the error performance of the two dimensional systems are derived. Moreover, a novel robust space-frequency index modulation scheme is also developed. Finally, simulation results are presented to validate the system performances and the theoretical derivations