252,160 research outputs found
Reliable Video Streaming over mmWave with Multi Connectivity and Network Coding
The next generation of multimedia applications will require the
telecommunication networks to support a higher bitrate than today, in order to
deliver virtual reality and ultra-high quality video content to the users. Most
of the video content will be accessed from mobile devices, prompting the
provision of very high data rates by next generation (5G) cellular networks. A
possible enabler in this regard is communication at mmWave frequencies, given
the vast amount of available spectrum that can be allocated to mobile users;
however, the harsh propagation environment at such high frequencies makes it
hard to provide a reliable service. This paper presents a reliable video
streaming architecture for mmWave networks, based on multi connectivity and
network coding, and evaluates its performance using a novel combination of the
ns-3 mmWave module, real video traces and the network coding library Kodo. The
results show that it is indeed possible to reliably stream video over cellular
mmWave links, while the combination of multi connectivity and network coding
can support high video quality with low latency.Comment: To be presented at the 2018 IEEE International Conference on
Computing, Networking and Communications (ICNC), March 2018, Maui, Hawaii,
USA (invited paper). 6 pages, 4 figure
Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module
Thanks to the wide availability of bandwidth, the millimeter wave (mmWave)
frequencies will provide very high data rates to mobile users in next
generation 5G cellular networks. However, mmWave links suffer from high
isotropic pathloss and blockage from common materials, and are subject to an
intermittent channel quality. Therefore, protocols and solutions at different
layers in the cellular network and the TCP/IP protocol stack have been proposed
and studied. A valuable tool for the end-to-end performance analysis of mmWave
cellular networks is the ns-3 mmWave module, which already models in detail the
channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the
Long Term Evolution (LTE) stack for the higher layers. In this paper we present
an implementation for the ns-3 mmWave module of multi connectivity techniques
for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA)
and Dual Connectivity (DC), and discuss how they can be integrated to increase
the functionalities offered by the ns-3 mmWave module.Comment: 9 pages, 7 figures, submitted to the Workshop on ns-3 (WNS3) 201
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration
Communications at frequencies above 10 GHz (the mmWave band) are expected to
play a major role for the next generation of cellular networks (5G), because of
the potential multi-gigabit, ultra-low latency performance of this technology.
mmWave frequencies however suffer from very high isotropic pathloss, which may
result in cells with a much smaller coverage area than current LTE macrocells.
High directionality techniques will be used to improve signal quality and
extend coverage area, along with a high density deployment of mmWave base
stations (BS). However, when propagation conditions are hard and it is
difficult to provide high quality coverage with mmWave BS, it is necessary to
rely on previous generation LTE base stations, which make use of lower
frequencies (900 MHz - 3.5 GHz), which are less sensitive to blockage and
experience lower pathloss. In order to provide ultra-reliable services to
mobile users there is a need for network architectures that tightly and
seamlessly integrate the LTE and mmWave Radio Access Technologies. In this
paper we will present two possible alternatives for this integration and show
how simulation tools can be used to assess and compare their performance.Comment: This paper was accepted for presentation at the ninth EAI SIMUtools
2016 conference, August 22 - 23, 2016, Prague, Czech Republi
NR V2X Communications at Millimeter Waves: An End-to-End Performance Evaluation
3GPP NR V2X represents the new 3GPP standard for next-generation vehicular
systems which, among other innovations, supports vehicle-to-vehicle (V2V)
operations in the millimeter wave (mmWave) spectrum to address the
communication requirements of future intelligent automotive networks. While
mmWaves will enable massive data rates and low latency, the propagation
characteristics at very high frequencies become very challenging, thereby
calling for accurate performance evaluations as a means to properly assess the
performance of such systems. Along these lines, in this paper MilliCar, the new
ns-3 module based on the latest NR V2X specifications, is used to provide an
end-to-end performance evaluation of mmWave V2V networks. We investigate the
impact of different propagation scenarios and system parameters, including the
inter-vehicle distance, the adopted frame numerology, and the modulation and
coding scheme, and provide guidelines towards the most promising V2V deployment
configurations.Comment: 6 pages, 7 figures. Submitted to IEEE Globecom 202
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
X-TCP: A Cross Layer Approach for TCP Uplink Flows in mmWave Networks
Millimeter wave frequencies will likely be part of the fifth generation of
mobile networks and of the 3GPP New Radio (NR) standard. MmWave communication
indeed provides a very large bandwidth, thus an increased cell throughput, but
how to exploit these resources at the higher layers is still an open research
question. A very relevant issue is the high variability of the channel, caused
by the blockage from obstacles and the human body. This affects the design of
congestion control mechanisms at the transport layer, and state-of-the-art TCP
schemes such as TCP CUBIC present suboptimal performance. In this paper, we
present a cross layer approach for uplink flows that adjusts the congestion
window of TCP at the mobile equipment side using an estimation of the available
data rate at the mmWave physical layer, based on the actual resource allocation
and on the Signal to Interference plus Noise Ratio. We show that this approach
reduces the latency, avoiding to fill the buffers in the cellular stack, and
has a quicker recovery time after RTO events than several other TCP congestion
control algorithms.Comment: 6 pages, 5 figures, accepted for presentation at the 2017 16th Annual
Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET
Transionospheric Microwave Propagation: Higher-Order Effects up to 100 GHz
Ionospheric refraction is considered as one of the major accuracy limiting factors in microwave space-based geodetic techniques such as the Global Positioning System (GPS), Satellite Laser Ranging (SLR), very-long-baseline interferometry (VLBI), Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), and satellite altimetry. Similarly, a high-performance ground-to-space and space-to-ground microwave link is considered to be very important for synchronizing clocks in global networks. Moreover, precise time and frequency transfer may lead to new applications in navigation, Earth observation, solar system science, and telecommunications. However, all transionospheric microwave signals are subject to ionospheric refraction and subsequent delays in the travel time. Since the ionosphere is a dispersive medium for radio signals, the first-order propagation effect can be removed by combining signals at two or more frequencies. Anyway, higher-order ionospheric effects remain uncorrected in such combinations. The residuals can significantly affect the accuracy of precise positioning, navigation, as well as the performance of time and frequency transfer. Here, we studied ionospheric propagation effects including higher-order terms for microwave signals up to 100Â GHz frequencies. The possible combination between the L, S, C, X, Ku, and Ka band frequencies is studied for the first-order ionosphere-free solutions. We estimated the higher-order propagation effects such as the second- and third-order terms and ray-path bending effects in the dual-frequency group delay and phase advance computation. Moreover, the correction formulas originally developed for global navigation satellite systems (GNSS) L-band frequencies are tested for mitigating residual errors at higher frequencies up to 100Â GHz
FM Threshold and Methods of Limiting its Effect on Performance
This paper presents the outcome of the investigative study carried out on threshold effect in FM systems. The study gave a proper insight on how the threshold effect affects the performance of FM systems by giving detailed report on the occurrence. Performance evaluation shows that the threshold is the existence of large noise in the output of the system, which makes signal detection impossible. The effect, as was discovered through analysis, is more serious at very high frequencies as can be seen from the deviational effect noticed on the graph which depicts the presence of noise in the system and it is in-fact a confirmation that noise at that level is frequency dependent. Pre- emphasis and de – emphasis networks were discussed to show how the effect could be controlled in FM systems
- …