64 research outputs found
60 GHz MAC Standardization: Progress and Way Forward
Communication at mmWave frequencies has been the focus in the recent years.
In this paper, we discuss standardization efforts in 60 GHz short range
communication and the progress therein. We compare the available standards in
terms of network architecture, medium access control mechanisms, physical layer
techniques and several other features. Comparative analysis indicates that IEEE
802.11ad is likely to lead the short-range indoor communication at 60 GHz. We
bring to the fore resolved and unresolved issues pertaining to robust WLAN
connectivity at 60 GHz. Further, we discuss the role of mmWave bands in 5G
communication scenarios and highlight the further efforts required in terms of
research and standardization
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Evaluation of IEEE 802.11ad for mmWave V2V Communications
Autonomous vehicles can construct a more accurate perception of their
surrounding environment by exchanging rich sensor data with nearby vehicles.
Such exchange can require larger bandwidths than currently provided by
ITS-G5/DSRC and Cellular V2X. Millimeter wave (mmWave) communications can
provide higher bandwidth and could complement current V2X standards. Recent
studies have started investigating the potential of IEEE 802.11ad to support
high bandwidth vehicular communications. This paper introduces the first
performance evaluation of the IEEE 802.11ad MAC (Medium Access Control) and
beamforming mechanism for mmWave V2V communications. The study highlights
existing opportunities and shortcomings that should guide the development of
mmWave communications for V2V communications.Comment: 6 pages, 5 figures, 1 tabl
Towards Ultra-Low-Latency mmWave Wi-Fi for Multi-User Interactive Virtual Reality
The need for cables with high-fidelity Virtual Reality (VR) headsets remains
a stumbling block on the path towards interactive multi-user VR. Due to strict
latency constraints, designing fully wireless headsets is challenging, with the
few commercially available solutions being expensive. These solutions use
proprietary millimeter wave (mmWave) communications technologies, as extremely
high frequencies are needed to meet the throughput and latency requirements of
VR applications. In this work, we investigate whether such a system could be
built using specification-compliant IEEE 802.11ad hardware, which would
significantly reduce the cost of wireless mmWave VR solutions. We present a
theoretical framework to calculate attainable live VR video bitrates for
different IEEE 802.11ad channel access methods, using 1 or more head-mounted
displays connected to a single Access Point (AP). Using the ns-3 simulator, we
validate our theoretical framework, and demonstrate that a properly configured
IEEE 802.11ad AP can support at least 8 headsets receiving a 4K video stream
for each eye, with transmission latency under 1 millisecond.Comment: Published at 2020 IEEE Global Communications Conference (GLOBECOM
Low-Complexity Multi-User MIMO Algorithms for mmWave WLANs
Very high throughput and high-efficiency wireless local area networks (WLANs) have become essential for today's significant global Internet traffic and the expected significant global increase of public WiFi hotspots. Total Internet traffic is predicted to expand 3.7-fold from 2017 to 2022. In 2017, 53% of overall Internet traffic used by WiFi networks, and that number is expected to increase to 56.8% by 2022. Furthermore, 80% of overall Internet traffic is expected to be video traffic by 2022, up from 70% in 2017. WiFi networks are also expected to move towards denser deployment scenarios, such as stadiums, large office buildings, and airports, with very high data rate applications, such as ultra-high definition video wireless streaming. Thus, in order to meet the predicted growth of wireless traffic and the number of WiFi networks in the world, an efficient Internet access solution is required for the current IEEE 802.11 standards.
Millimeter wave (mmWave) communication technology is expected to play a crucial role in future wireless networks with large user populations because of the large spectrum band it can provide. To further improve spectrum efficiency over mmWave bands in WLANs with large numbers of users, the IEEE 802.11ay standard was developed from the traditional IEEE 802.11ad standard, aiming to support multi-user MIMO. Propagation challenges associated with mmWave bands necessitate the use of analog beamforming (BF) technologies that employ directional transmissions to determine the optimal sector beam between a transmitter and a receiver. However, the multi-user MIMO is not exploited, since analog BF is limited to a single-user, single-transmission. The computational complexity of achieving traditional multi-user MIMO BF methods, such as full digital BF, in the mmWave systems becomes significant due to the hardware constraints. Our research focuses on how to effectively and efficiently realize multi-user MIMO transmission to improve spectrum efficiency over the IEEE 802.11ay mmWave band system while also resolving the computational complexity challenges for achieving a multi-user MIMO in mmWave systems.
This thesis focuses on MAC protocol algorithms and analysis of the IEEE 802.11ay mmWave WLANs to provide multi-user MIMO support in various scenarios to improve the spectrum efficiency and system throughput. Specifically, from a downlink single-hop scenario perspective, a VG algorithm is proposed to schedule simultaneous downlink transmission links while mitigating the multi-user interference with no additional computational complexity. From a downlink multi-hop scenario perspective, a low-complexity MHVG algorithm is conducted to realize simultaneous transmissions and improve the network performance by taking advantage of the spatial reuse in a dense network. The proposed MHVG algorithm permits simultaneous links scheduling and mitigates both the multi-user interference and co-channel interference based only on analog BF information, without the necessity for feedback overhead, such as channel state information (CSI). From an uplink scenario perspective, a low-complexity user selection algorithm, HBF-VG, incorporates user selection with the HBF algorithm to achieve simultaneous uplink transmissions for IEEE 802.11ay mmWave WLANs. With the HBF-VG algorithm, the users can be selected based on an orthogonality criterion instead of collecting CSI from all potential users. We optimize the digital BF to mitigate the residual interference among selected users. Extensive analytical and simulation evaluations are provided to validate the performance of the proposed algorithms with respect to average throughput per time slot, average network throughput, average sum-rate, energy efficiency, signal-to-interference-plus-noise ratio (SINR), and spatial multiplexing gain
Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas
Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage.
The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field.
Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter.
Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter.
Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems.
General conclusions are drawn after analysis of measurement results
Scheduling the Data Transmission Interval in IEEE 802.11ad
IEEE 802.11ad standard enables communications in the mm-wave and unlicensed 60 GHz band. Propagation at mm-wave frequencies accounts for increased path loss and sensitivity to blockage when compared to sub-6-GHz frequencies. In order to realize communications in this vast spectrum, the standard introduced a novel medium access control layer which enables contention-free and contention-based channel access
- …