Optical Communication

Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries

Single and Multi-Hop Vehicular Visible and Infrared Light Communications

Visible light communications (VLC) have been proposed as a complementary technology in vehicular networks due to its several merits including high security, high scalability than RF technology. Notably, the RF technology established for vehicular networks best known as the dedicated short-range communications, supports many applications but doubts still exist on the capability of this technology to meet the low latency (where not more than 20 ms is required for pre-crash sensing and cooperative collision mitigation) and high reliability requirements in intelligent transport systems (ITS), when considering issues such as network outages as well as security issues. Of interest is the wide increase in the use of light emitting diode (LED)-based vehicle and traffic lights, and cameras in vehicles (rear and dashcams), traffic and security cameras, hence opening more opportunities for the VLC technology as part of ITS. Remarkably, camera-based VLC (i.e., optical camera communications) offers even further capabilities such as vehicle localization, motion and scene detection and pattern recognition. However, the VLC system has few challenges that needs addressing for the practical implementation of this technology as part of ITS. Consequently, this thesis focuses on addressing the key challenges and proposing novel technical analytical and experimental solutions. Firstly, increasing the robustness to sunlight induced noise is one of the major challenges in vehicular VLC, hence this thesis proposes an infrared (IR) transmission, as the amount of solar irradiance is lesser in the IR band than in the visible band. Performance of the proposed scheme is validated through numerical simulations with realistic emulated sunlight noise from empirical measurement. Investigations on the effects of turbulence with aperture averaging and fog on vehicular VLC is also carried out via experiments. Secondly, increasing the communication range is another major challenge, consequently the feasibility of using different vehicle taillights (TLs) as the VLC transmitter are evaluated via simulations based on empirical measurements of the radiation characteristics and transmit powers of the TLs. Results obtained indicate that, only a very low link span of 89 m at the forward error correction (FEC) bit error rate (BER) limit of 3.8 × 10-3, compared to 4.5, 5.4, and 6.3 m for the BMW vehicle-based TL at data rates of 10, 6, and 2 Mbps are achieved under realistic sunlight conditions. While, to increase the communication distance of camera-based VLC links, reducing the spatial bandwidth of the camera in its out of focus regions is proposed, mathematically analysed, and experimentally demonstrated where up to a 400 m link span at a 100 % success reception rate is achieved at a data rate of 800 bps, which is the longest so far reported. Relay-assisted links are also investigated using amplify-and-forward (AF) and decode-and-forward (DF) relaying schemes under the emulated sunlight noise. A mathematical and simulation-based system model is developed, where different transmitter/receiver geometries are considered and AF and DF schemes. Results obtained via simulations shows that the DF scheme is a suitable candidate for vehicular VLC connectivity under emulated sunlight noise, offering at the FEC BER limit of 3.8 × 10-3 up to 150 % increase in the link distance by the end of the 2nd hop. Proof of concept experimental demonstration of AF and DF schemes for vehicular VLC are also carried out showing that DF is the preferred option. Moreover, insights are provided into the impact of various system parameters on the relay-assisted links. Finally, increasing the mobility of the vehicular VLC system is another major challenge, hence analysis on the required angular field of view (AFOV) for vehicular links considering necessary geometry parameters is investigated. Mathematical expressions to determine the required AFOV based on key system parameters are also derived. Furthermore, the relevance of the choice of the receiver parameters for an enhanced AFOV is also analysed, consequently a means to mitigate the effects of beam spot offset induced power losses at the photodiode caused by the misalignment of the transmitter and imaging receiver is proposed