Outage probability analysis for hybrid TSR-PSR based SWIPT systems over log-normal fading channels

Employing simultaneous information and power transfer (SWIPT) technology in cooperative relaying networks has drawn considerable attention from the research community. We can find several studies that focus on Rayleigh and Nakagami-m fading channels, which are used to model outdoor scenarios. Differing itself from several existing studies, this study is conducted in the context of indoor scenario modelled by log-normal fading channels. Specifically, we investigate a so-called hybrid time switching relaying (TSR)-power splitting relaying (PSR) protocol in an energy-constrained cooperative amplify-and-forward (AF) relaying network. We evaluate the system performance with outage probability (OP) by analytically expressing and simulating it with Monte Carlo method. The impact of power-splitting (PS), time-switching (TS) and signal-to-noise ratio (SNR) on the OP was as well investigated. Subsequently, the system performance of TSR, PSR and hybrid TSR-PSR schemes were compared. The simulation results are relatively accurate because they align well with the theory

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

NOMA in Cooperative Communication Systems with Energy-Harvesting Nodes and Wireless Secure Transmission

In this paper, non-orthogonal multiple access (NOMA) in cooperative relay system is considered, where a source node communicates with a pair of energy harvesting (EH) user equipments through a multiple antennas relay node. A hybrid protocol is adopted at the relay, in which if the relay can successfully decode the signals, decode- and-forward (DF) protocol will be adopted to forward the signals to the users. Otherwise, amplify-and-forward (AF) protocol will be implemented. Assuming that the users adopt maximal ratio combining (MRC) to combine the received signals in the two cooperative phases, new explicit analytical expressions for the average sum-rate are derived when the relay works in, 1) AF mode, and 2) DF mode, in two scenarios when one user is the stronger in both cooperation phases, and when an alternative user is stronger in each phase. Then, the investigation is extended to the case where the relay is an untrusted node, and cooperative jamming technique is proposed to degrade the ability of the relay to decode the signals and enforce the relay to operate always in AF mode. For the untrusted relay scenario, new analytical expression for the average secrecy rate is derived. Monte Carlo simulations are provided to validate the analysis. The simulation results reveal that the location of the relay is the key parameter to achieve the best performance

Outage performance analysis of non-orthogonal multiple access systems with RF energy harvesting

Non-orthogonal multiple access (NOMA) has drawn enormous attention from the research community as a promising technology for future wireless communications with increasing demands of capacity and throughput. Especially, in the light of fifth-generation (5G) communication where multiple internet-of-things (IoT) devices are connected, the application of NOMA to indoor wireless networks has become more interesting to study. In view of this, we investigate the NOMA technique in energy harvesting (EH) half-duplex (HD) decode-and-forward (DF) power-splitting relaying (PSR) networks over indoor scenarios which are characterized by log-normal fading channels. The system performance of such networks is evaluated in terms of outage probability (OP) and total throughput for delay-limited transmission mode whose expressions are derived herein. In general, we can see in details how different system parameters affect such networks thanks to the results from Monte Carlo simulations. For illustrating the accuracy of our analytical results, we plot them along with the theoretical ones for comparison

Wireless-powered cooperative communications: protocol design, performance analysis and resource allocation

Radio frequency (RF) energy transfer technique has attracted much attention and has recently been regarded as a key enabling technique for wireless-powered communications. However, the high attenuation of RF energy transfer over distance has greatly limited the performance and applications of WPCNs in practical scenarios. To overcome this essential hurdle, in this thesis we propose to combat the propagation attenuation by incorporating cooperative communication techniques in WPCNs. This opens a new paradigm named wireless-powered cooperative communication and raises many new research opportunities with promising applications. In this thesis, we focus on the novel protocol design, performance analysis and resource allocation of wireless-powered cooperative communication networks (WPCCNs). We first propose a harvest-then-cooperate (HTC) protocol for WPCCNs, where the wireless-powered source and relay(s) harvest energy from the AP in the downlink (DL) and work cooperatively in the uplink (UL) for transmitting source information. The average throughput performance of the HTC protocol with two single relay selection schemes is analyzed. We then design two novel protocols and study the optimal resource allocation for another setup of WPCCNs with a hybrid relay that has a constant power supply. Besides cooperating with the source for UL information transmission, the hybrid relay also transmits RF energy concurrently with the AP during the DL energy transfer phase. Subsequently, we adopt the Stackelberg game to model the strategic interactions in power beacon (PB)-assisted WPCCNs, where PBs are deployed to provide wireless charging services to wireless-powered users via RF energy transfer and are installed by different operators with the AP. Finally, we develop a distributed power splitting framework using non-cooperative game theory for a large-scale WPCCN, where multiple source-destination pairs communicate through their dedicated wireless-powered relays

Minimizing Outage Probability by Exploiting CSI in Wireless Powered Cooperative Networks

In this work, we address the relay selection problem for the wireless powered communication networks, where the relays harvest energy from the source radio frequency signals. A single source-destination pair is considered without a direct link. The connecting relay nodes are equipped with storage batteries of infinite size. We assume that the channel state information (CSI) on the source-relay link is available at the relay nodes. Depending on the availability of the CSI on the relay-destination link at the relay node, we propose different relay selection schemes and evaluate the outage probability. The availability of the CSI at the relay node on the relay-destination link considerably improves the performance due to additional flexibility in the relay selection mechanism. We numerically quantify the performance for the proposed schemes and compare the outage probability for fixed and equal number of wireless powered forwarding relays.Comment: accepted in IEEE Globecom 201