42,781 research outputs found
Modelling of advanced submicron gate InGaAs/InAIAs pHEMTS and RTD devices for very high frequency applications
InP based InAlAs/InGaAs pseudomorphic High Electron Mobility Transistors
(pHEMTs) have shown outstanding performances, which makes them prominent in high
frequency mm-wave and submillimeter-wave applications. However, conventional
InGaAs/InAlAs pHEMTs have major drawbacks, i.e., very low breakdown voltage and high
gate leakage current. These disadvantages degrade device performance, especially in
Monolithic Microwave Integrated Circuit (MMIC) low noise amplifiers (LNAs). The
optimisation of InAlAs/InGaAs epilayer structures through advanced bandgap engineering
together with gate length reduction from 1 m into deep sub-μm regime is the key solution
to enabled high breakdown and ultra-high speed, low noise pHEMT devices to be fabricated.
Concurrently, device modelling plays a vital role in the design and analysis of pHEMT
device and circuit performance. Physical modeling becomes essential to fully characterise
and understand the underlying physical phenomenon of the device, while empirical
modelling is significant in circuit design and predicts device’s characteristic performance.
In this research, the main objectives to accurately model the DC and RF
characteristics of the two-dimensional (2D) physical modelling for sub-μm gate length for
strained channel InAlAs/InGaAs/InP pHEMT has been accomplished and developed in
ATLAS Silvaco. All modelled devices were optimised and validated by experimental
devices which were fabricated at the University of Manchester; the sub-micrometer devices
were developed with T-gate using I-line optical lithography. The underlying device physics
insight are gained, i.e, the effects of changes to the device’s physical structure, theoretical
concepts and its general operation, hence a reliable pHEMT model is obtained. The kink
anomalies in I-V characteristics was reproduced and the 2D simulation results demonstrate
an outstanding agreement with measured DC and RF characteristics.
The aims to develop linear and nonlinear models for sub-μm transistors and their
implementation in MMIC LNA design is achieved with the 0.25 m
In0.7Ga0.3As/In0.52Al0.48As/InP pHEMT. An accurate technique for the extraction of empirical
models for the fabricated active devices has been developed and optimised using Advance
Design System (ADS) software which demonstrate excellent agreement between
experimental and modelled DC and RF data. A precise models for MMIC passive devices
have also been obtained and incorporated in the proposed design for a single and double
stage MMIC LNAs in C- and X-band frequency. The single stage LNA is designed to
achieve maximum gain ranging from 9 to 13 dB over the band of operation while the gain is
increased between 20 dB and 26 dB for the double stage LNA designs. A noise figure of
less than 1.2 dB and 2 dB is expected respectively, for the C- and X-band LNA designed
while retaining stability across the entire frequency bands.
Although the RF performance of pHEMT is being vigorously pushed towards
terahertz region, novel devices such as Resonant Tunnelling Diode (RTD) are needed to
support future ultra-high speed, high frequency applications especially when it comes to
THz frequencies. Hence, the study of physical modelling is extended to quantum modelling
of an advanced In0.8Ga0.2As/AlAs RTD device to effectively model both large size and
submicron RTD using Silvaco’s ATLAS software to reproduce the peak current density,
peak-to-valley-current ratio (PVCR), and negative differential resistance (NDR) voltage
range. The simple one-dimensional physical modelling for the RTD devices is optimised to
achieve an excellent match with the fabricated RTD devices with variations in the spacer
thickness, barrier thickness, quantum well thickness and doping concentration
Cities, traffic, and CO2: A multidecadal assessment of trends, drivers, and scaling relationships
Emissions of CO2 from road vehicles were 1.57 billion metric tons in 2012, accounting for 28% of US fossil fuel CO2 emissions, but the spatial distributions of these emissions are highly uncertain. We develop a new emissions inventory, the Database of Road Transportation Emissions (DARTE), which estimates CO2 emitted by US road transport at a resolution of 1 km annually for 1980-2012. DARTE reveals that urban areas are responsible for 80% of on-road emissions growth since 1980 and for 63% of total 2012 emissions. We observe nonlinearities between CO2 emissions and population density at broad spatial/temporal scales, with total on-road CO2 increasing nonlinearly with population density, rapidly up to 1,650 persons per square kilometer and slowly thereafter. Per capita emissions decline as density rises, but at markedly varying rates depending on existing densities. We make use of DARTE's bottom-up construction to highlight the biases associated with the common practice of using population as a linear proxy for disaggregating national- or state-scale emissions. Comparing DARTE with existing downscaled inventories, we find biases of 100% or more in the spatial distribution of urban and rural emissions, largely driven by mismatches between inventory downscaling proxies and the actual spatial patterns of vehicle activity at urban scales. Given cities' dual importance as sources of CO2 and an emerging nexus of climate mitigation initiatives, high-resolution estimates such as DARTE are critical both for accurately quantifying surface carbon fluxes and for verifying the effectiveness of emissions mitigation efforts at urban scales.https://doi.org/10.1073/pnas.1421723112Published versio
Bumpy Roads Ahead: America's Roughest Rides and Strategies to Make our Roads Smoother
These days, potholes and pavement deterioration make it a challenge to keep the wheel steady on America's roads and highways. More than a quarter of the nation's major urban roadways -- highways and major streets that are the main routes for commuters and commerce -- are in poor condition. These critical links in the nation's transportation system carry 78 percent of the approximately 2 trillion miles driven annually in urban America. With state and local governments unable to adequately fund road repairs and with the current federal surface transportation program set to expire on September 30, 2014, road conditions could get even worse in the future. In this report, TRIP examines the condition of the nation's major urban roads, including pavement condition data for America's most populous urban areas, recent trends in travel, the latest developments in repairing roads and building them to last longer, and the funding levels needed to adequately address America's deteriorated roadways. For the purposes of this report, an urban area includes the major city in a region and its neighboring or surrounding suburban areas. Pavement condition data are the latest available and are derived from the Federal Highway Administration's (FHWA) 2011 annual survey of state transportation officials on the condition of major state and locally maintained roads and highways, based on a uniform pavement rating index. The pavement rating index measures the level of smoothness of pavement surfaces, supplying information on the ride quality provided by road and highway surfaces
A City-Scale ITS-G5 Network for Next-Generation Intelligent Transportation Systems: Design Insights and Challenges
As we move towards autonomous vehicles, a reliable Vehicle-to-Everything
(V2X) communication framework becomes of paramount importance. In this paper we
present the development and the performance evaluation of a real-world
vehicular networking testbed. Our testbed, deployed in the heart of the City of
Bristol, UK, is able to exchange sensor data in a V2X manner. We will describe
the testbed architecture and its operational modes. Then, we will provide some
insight pertaining the firmware operating on the network devices. The system
performance has been evaluated under a series of large-scale field trials,
which have proven how our solution represents a low-cost high-quality framework
for V2X communications. Our system managed to achieve high packet delivery
ratios under different scenarios (urban, rural, highway) and for different
locations around the city. We have also identified the instability of the
packet transmission rate while using single-core devices, and we present some
future directions that will address that.Comment: Accepted for publication to AdHoc-Now 201
It's about time: Investing in transportation to keep Texas economically competitive - Appendices
APPENDIX A : PAVEMENT QUALITY (Zhanmin Zhang, Michael R. Murphy, Robert Harrison), 7 pages -- APPENDIX B : BRIDGE QUALITY (Jose Weissmann, Angela J. Weissmann), 6 pages -- APPENDIX C : URBAN TRAFFIC CONGESTION (Tim Lomax, David Schrank), 32 pages -- APPENDIX D: RURAL CORRIDORS (Tim Lomax, David Schrank), 6 pages -- APPENDIX E: ADDITIONAL REVENUE SOURCE OPTIONS FOR PAVEMENT AND BRIDGE MAINTENANCE (Mike Murphy, Seokho Chi, Randy Machemehl, Khali Persad, Robert Harrison, Zhanmin Zhang), 81 pages -- APPENDIX F: FUNDING TRANSPORTATION IMPROVEMENTS (David Ellis, Brianne Glover, Nick Norboge, Wally Crittenden), 19 pages -- APPENDIX G: ESTIMATING VEHICLE OPERATING COSTS AND PAVEMENT DETERIORATION (by Robert Harrison), 4 page
The Effect of Government Highway Spending on Road Users' Congestion Costs
Policymakers attempt to reduce the growth of congestion by spending billions of dollars annually on our road system. We evaluate this policy by estimating the determinants of congestion costs for motorists, trucking operations, and shipping firms. We find that, on average, one dollar of highway spending in a given year reduces the congestion costs to road users only eleven cents in that year. We also find that even if the allocation of spending were optimized to minimize congestion costs that it still is not a cost-effective way to reduce congestion. We conclude the evidence strengthens the case for road pricing.
Issues Related to the Emergence of the Information Superhighway and California Societal Changes, IISTPS Report 96-4
The Norman Y. Mineta International Institute for Surface Transportation Policy Studies (IISTPS) at San José State University (SJSU) conducted this project to review the continuing development of the Internet and the Information Superhighway. Emphasis was placed on an examination of the impact on commuting and working patterns in California, and an analysis of how public transportation agencies, including Caltrans, might take advantage of the new communications technologies. The document reviews the technology underlying the current Internet “structure” and examines anticipated developments. It is important to note that much of the research for this limited-scope project was conducted during 1995, and the topic is so rapidly evolving that some information is almost automatically “dated.” The report also examines how transportation agencies are basically similar in structure and function to other business entities, and how they can continue to utilize the emerging technologies to improve internal and external communications. As part of a detailed discussion of specific transportation agency functions, it is noted that the concept of a “Roundtable Forum,” growing out of developments in Concurrent Engineering, can provide an opportunity for representatives from multiple jurisdictions to utilize the Internet for more coordinated decision-making. The report also included an extensive analysis of demographic trends in California in recent years, such as commute and recreational activities, and identifies how the emerging technologies may impact future changes
MIXED-USE SAFETY ON RURAL FACILITIES IN THE PACIFIC NORTHWEST: Consideration of Vehicular, Non-Traditional, and Non-Motorized Users
In the United States, one in 12 households do not own a personal automobile and approximately 13% of those who are old enough to drive do not. Trips by these individuals are being made in one of many other possible modes, creating the need to “share space” between many forms of travel. The goal of this project is to: improve safety and minimize the dangers for all transportation mode types while traveling in mixed-use environments on rural facilities through the development and use of engineering and education safety measures. To that end, this report documents three specific efforts by the project team. First, a comprehensive literature review of mixed-use safety issues with consideration of non-motorized and non-traditional forms of transportation. Second, a novel analysis of trauma registry data. Third, development, execution and analysis of the Pacific Northwest Transportation Survey geared toward understanding safety perceptions of mixed-use users. Most notably, findings indicate that ATVs (and similar non-traditional-type vehicles) are used on or near roads 24% of the time and snowmachines are used on or near roads 23% of the time. There are significantly more (twice as many) ATV-related on-road traumas in connected places than isolated places in Alaska and three times more traumas in highway connected places than in secondary road connected places. Comparably, bicycles had 449 on-road traumas between 2004 and 2011 whereas ATVs had 352 on-road traumas. Users of all modes who received formalized training felt safer in mixed-use environments than those who reported having no training at all
- …