199 research outputs found
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Evaluation of IEEE 802.11ad for mmWave V2V Communications
Autonomous vehicles can construct a more accurate perception of their
surrounding environment by exchanging rich sensor data with nearby vehicles.
Such exchange can require larger bandwidths than currently provided by
ITS-G5/DSRC and Cellular V2X. Millimeter wave (mmWave) communications can
provide higher bandwidth and could complement current V2X standards. Recent
studies have started investigating the potential of IEEE 802.11ad to support
high bandwidth vehicular communications. This paper introduces the first
performance evaluation of the IEEE 802.11ad MAC (Medium Access Control) and
beamforming mechanism for mmWave V2V communications. The study highlights
existing opportunities and shortcomings that should guide the development of
mmWave communications for V2V communications.Comment: 6 pages, 5 figures, 1 tabl
Throughput and Robustness Guaranteed Beam Tracking for mmWave Wireless Networks
With the increasing demand of ultra-high-speed wireless communications and
the existing low frequency band (e.g., sub-6GHz) becomes more and more crowded,
millimeter-wave (mmWave) with large spectra available is considered as the most
promising frequency band for future wireless communications. Since the mmWave
suffers a serious path-loss, beamforming techniques shall be adopted to
concentrate the transmit power and receive region on a narrow beam for
achieving long distance communications. However, the mobility of users will
bring frequent beam handoff, which will decrease the quality of experience
(QoE). Therefore, efficient beam tracking mechanism should be carefully
researched. However, the existing beam tracking mechanisms concentrate on
system throughput maximization without considering beam handoff and link
robustness. This paper proposes a throughput and robustness guaranteed beam
tracking mechanism for mobile mmWave communication systems which takes account
of both system throughput and handoff probability. Simulation results show that
the proposed throughput and robustness guaranteed beam tracking mechanism can
provide better performance than the other beam tracking mechanisms.Comment: Accepted by IEEE/CIC ICCC 201
- …