Pancreatic phospholipase A2 activity in acute pancreatitis: A prognostic marker for early identification of patients at risk

Remarkably elevated levels of phospholipase A(2) (PLA(2)) are measurable in human blood samples in cases of acute pancreatitis. The source of the enzyme was first thought to be exclusively the pancreas, but now it is generally accepted that two isoenzymes the pancreatic PLA(2), group I, and the extrapancreatic PLA(2), group II contribute to the raised activity. In contrast to the group II-PLA(2), the pancreatic PLA(2) is heatresistant for 1 hour at 60 degreesC. The catalytically inactive proenzyme of the pancreatic PLA(2) can be activated by trypsin. The aim of our study was to evaluate the diagnostic value of PLA(2) isoenzyme activity measurements to identify patients with severe complications in acute pancreatitis. Blood samples from patients suffering from acute pancreatitis were analyzed for catalytically active pancreatic PLA(2) on day 1 and 2 of hospitalization with a modified radiometric Escherichia colibased PLA(2) assay. In 10 of 41 patients clearly elevated values of catalytically active, heatresistant pancreatic PLA(2) (7.2 to 81.2 U/l) were observed. This group of patients was characterized by severe complications (necrotizing pancreatitis, shock, sepsis, respiratory problems) of which two patients subsequently died. Patients with low or undetectable activity (<7 U/l) of pancreatic PLA(2) recovered rapidly. According to these results the presence of catalytically active pancreatic PLA(2) in serum is associated with severe complications of acute pancreatitis. In contrast to total serumPLA(2), the catalytic concentration of pancreatic PLA(2) can serve as a prognostic marker in acute pancreatitis

PLA/PA bio-blends: induced morphology by extrusion

The effect of processing conditions on the final morphology of Poly(Lactic Acid) (PLA) with bio-based Polyamide 10.10 (PA) 70/30 blends is analyzed in this paper. Two types of PLA were used: Commercial (neat PLA) and a rheologically modified PLA (PLAREx), with higher melt elasticity produced by reactive extrusion. To evaluate the ability of in situ micro-fibrillation (µf) of PA phase during blend compounding by twin-screw extrusion, two processing parameters were varied: (i) Screw speed rotation (rpm); and (ii) take-up velocity, to induce a hot stretching with different Draw Ratios (DR). The potential ability of PA-µf in both bio-blends was evaluated by the viscosity (p) and elasticity (k’) ratios determined from the rheological tests of pristine polymers. When PLAREx was used, the requirements for PA-µf was fulfilled in the shear rate range observed at the extrusion die. Scanning electron microscopy (SEM) observations revealed that, unlike neat PLA, PLAREx promoted PA-µf without hot stretching and the aspect ratio increased as DR increased. For neat PLA-based blends, PA-µf was promoted during the hot stretching stage. DMTA analysis revealed that the use of PLAREx PLAREx resulted in a better mechanical performance in the rubbery region (T > Tg PLA-phase) due to the PA-µf morphology obtained.Peer ReviewedPostprint (published version

Effect of fibre treatments on interfacial shear strength of hemp fibre reinforced polylactide and unsaturated polyester composites

Surface treatment of hemp fibres was investigated as a means of improving interfacial shear strength (IFSS) of hemp fibre reinforced polylactide (PLA) and unsaturated polyester (UPE) composites. Fibres were treated with sodium hydroxide, acetic anhydride, maleic anhydride and silane. A combined treatment using sodium hydroxide and silane was also carried out. IFSS of PLA/hemp fibre samples increased after treatment, except in the case of maleic anhydride treatment. Increased IFSS could be explained by better bonding of PLA with treated fibres and increased PLA transcrystallinity. The highest IFSS was 11.4 MPa which was obtained for the PLA/alkali treated fibre samples. IFSS of UPE/hemp fibre samples increased for all treated fibres. This is believed to be due to the improvement of chemical bonding between the treated fibres and the UPE as supported by FT-IR results. The highest IFSS (20.3 MPa) was found for the combined sodium hydroxide and silane treatment fibre/UPE samples

Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications

In this research, we present a simple and cost effective soft lithographic process to fabricate PLA scaffolds for tissue engineering. In which, the negative photoresist JSR THB-120N was spun on a glass subtract followed by conventional UV lithographic processes to fabricate the master to cast the PDMS elastomeric mold. A thin poly(vinyl alcohol) (PVA) layer was used as a mode release such that the PLA scaffold can be easily peeled off. The PLA precursor solution was then cast onto the PDMS mold to form the PLA microstructures. After evaporating the solvent, the PLA microstructures can be easily peeled off from the PDMS mold. Experimental results show that the desired microvessels scaffold can be successfully transferred to the biodegradable polymer PLA.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing

Plasma modification of poly lactic acid solutions to generate high quality electrospun PLA nanofibers

Physical properties of pre-electrospinning polymer solutions play a key role in electrospinning as they strongly determine the morphology of the obtained electrospun nanofibers. In this work, an atmospheric-pressure argon plasma directly submerged in the liquid-phase was used to modify the physical properties of poly lactic acid (PLA) spinning solutions in an effort to improve their electrospinnability. The electrical characteristics of the plasma were investigated by two methods; V-I waveforms and Q-V Lissajous plots while the optical emission characteristics of the plasma were also determined using optical emission spectroscopy (OES). To perform a complete physical characterization of the plasma-modified polymer solutions, measurements of viscosity, surface tension, and electrical conductivity were performed for various PLA concentrations, plasma exposure times, gas flow rates, and applied voltages. Moreover, a fast intensified charge-couple device (ICCD) camera was used to image the bubble dynamics during the plasma treatments. In addition, morphological changes of PLA nanofibers generated from plasma-treated PLA solutions were observed by scanning electron microscopy (SEM). The performed plasma treatments were found to induce significant changes to the main physical properties of the PLA solutions, leading to an enhancement of electrospinnability and an improvement of PLA nanofiber formation

Effect of the viscosity ratio on the PLA/PA10.10 bioblends morphology and mechanical properties

PLA bio-blends with a predominantly biosourced PA10.10 in the composition range 10-50wt.% were prepared by melt blending in order to overcome the advanced brittleness of PLA. Due to the inherent immiscibility of the blends, 30 wt.% of PA was needed to achieve a brittle-to-ductile transition and a co-continuous morphology was predicted at 58 wt.% of PA. The initial enhancement of the PLA rheological behaviour through the environmentally friendly reactive extrusion process yielded a finer and more homogeneous microstructure and hence enhanced the mechanical properties of the bio-blends at much lower PA contents. The brittle-to-ductile transition could be achieved with only 10 wt.% and co-continuity was observed already at 44 wt.% of PA. Results indicate the significant potential of modifying PLA flow behaviour as a promising green manufacturing method toward expanding PLA-based bio-blends applications.Peer ReviewedPostprint (published version

Modular decomposition of the NOR-TSUM multiple-valued PLA

A method for designing PLA-based combinational circuits by modular decomposition is presented. Main subjects are 1) Specific properties of TSUM operator, 2) MIN-TSUM and NOR-TSUM expansions with respect to the bound set, X1 of variables, 3) Realization of functions by multiple-valued PLA-based combinational circuits, 4) Comparison with other methods. Experimental investigations show that the size of suggested combinational circuit is the same as the size of multiple-valued PLA implementing a multiple-valued logic function with large number of variables