522 research outputs found
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems
The millimeter wave (mmWave) frequencies are likely to play a significant
role in fifth-generation (5G) cellular systems. A key challenge in developing
systems in these bands is the potential for rapid channel dynamics: since
mmWave signals are blocked by many materials, small changes in the position or
orientation of the handset relative to objects in the environment can cause
large swings in the channel quality. This paper addresses the issue of tracking
the signal to noise ratio (SNR), which is an essential procedure for rate
prediction, handover and radio link failure detection. A simple method for
estimating the SNR from periodic synchronization signals is considered. The
method is then evaluated using real experiments in common blockage scenarios
combined with outdoor statistical models
Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers
Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement
A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence
Due to the advancements in cellular technologies and the dense deployment of
cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the
fifth-generation (5G) and beyond cellular networks is a promising solution to
achieve safe UAV operation as well as enabling diversified applications with
mission-specific payload data delivery. In particular, 5G networks need to
support three typical usage scenarios, namely, enhanced mobile broadband
(eMBB), ultra-reliable low-latency communications (URLLC), and massive
machine-type communications (mMTC). On the one hand, UAVs can be leveraged as
cost-effective aerial platforms to provide ground users with enhanced
communication services by exploiting their high cruising altitude and
controllable maneuverability in three-dimensional (3D) space. On the other
hand, providing such communication services simultaneously for both UAV and
ground users poses new challenges due to the need for ubiquitous 3D signal
coverage as well as the strong air-ground network interference. Besides the
requirement of high-performance wireless communications, the ability to support
effective and efficient sensing as well as network intelligence is also
essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting
aerial and ground users. In this paper, we provide a comprehensive overview of
the latest research efforts on integrating UAVs into cellular networks, with an
emphasis on how to exploit advanced techniques (e.g., intelligent reflecting
surface, short packet transmission, energy harvesting, joint communication and
radar sensing, and edge intelligence) to meet the diversified service
requirements of next-generation wireless systems. Moreover, we highlight
important directions for further investigation in future work.Comment: Accepted by IEEE JSA
- …