1,293 research outputs found
Performance evaluation of 5G millimeter-wave cellular access networks using a capacity-based network deployment tool
The next fifth generation (5G) of wireless communication networks comes with a set of new features to satisfy the demand of data-intensive applications: millimeter-wave frequencies, massive antenna arrays, beamforming, dense cells, and so forth. In this paper, we investigate the use of beamforming techniques through various architectures and evaluate the performance of 5G wireless access networks, using a capacity-based network deployment tool. This tool is proposed and applied to a realistic area in Ghent, Belgium, to simulate realistic 5G networks that respond to the instantaneous bit rate required by the active users. The results show that, with beamforming, 5G networks require almost 15% more base stations and 4 times less power to provide more capacity to the users and the same coverage performances, in comparison with the 4G reference network. Moreover, they are 3 times more energy efficient than the 4G network and the hybrid beamforming architecture appears to be a suitable architecture for beamforming to be considered when designing a 5G cellular network
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
MmWave Massive MIMO Based Wireless Backhaul for 5G Ultra-Dense Network
Ultra-dense network (UDN) has been considered as a promising candidate for
future 5G network to meet the explosive data demand. To realize UDN, a
reliable, Gigahertz bandwidth, and cost-effective backhaul connecting
ultra-dense small-cell base stations (BSs) and macro-cell BS is prerequisite.
Millimeter-wave (mmWave) can provide the potential Gbps traffic for wireless
backhaul. Moreover, mmWave can be easily integrated with massive MIMO for the
improved link reliability. In this article, we discuss the feasibility of
mmWave massive MIMO based wireless backhaul for 5G UDN, and the benefits and
challenges are also addressed. Especially, we propose a digitally-controlled
phase-shifter network (DPSN) based hybrid precoding/combining scheme for mmWave
massive MIMO, whereby the low-rank property of mmWave massive MIMO channel
matrix is leveraged to reduce the required cost and complexity of transceiver
with a negligible performance loss. One key feature of the proposed scheme is
that the macro-cell BS can simultaneously support multiple small-cell BSs with
multiple streams for each smallcell BS, which is essentially different from
conventional hybrid precoding/combining schemes typically limited to
single-user MIMO with multiple streams or multi-user MIMO with single stream
for each user. Based on the proposed scheme, we further explore the fundamental
issues of developing mmWave massive MIMO for wireless backhaul, and the
associated challenges, insight, and prospect to enable the mmWave massive MIMO
based wireless backhaul for 5G UDN are discussed.Comment: This paper has been accepted by IEEE Wireless Communications
Magazine. This paper is related to 5G, ultra-dense network (UDN), millimeter
waves (mmWave) fronthaul/backhaul, massive MIMO, sparsity/low-rank property
of mmWave massive MIMO channels, sparse channel estimation, compressive
sensing (CS), hybrid digital/analog precoding/combining, and hybrid
beamforming. http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=730653
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Frame Structure Design and Analysis for Millimeter Wave Cellular Systems
The millimeter-wave (mmWave) frequencies have attracted considerable
attention for fifth generation (5G) cellular communication as they offer orders
of magnitude greater bandwidth than current cellular systems. However, the
medium access control (MAC) layer may need to be significantly redesigned to
support the highly directional transmissions, ultra-low latencies and high peak
rates expected in mmWave communication. To address these challenges, we present
a novel mmWave MAC layer frame structure with a number of enhancements
including flexible, highly granular transmission times, dynamic control signal
locations, extended messaging and ability to efficiently multiplex directional
control signals. Analytic formulae are derived for the utilization and control
overhead as a function of control periodicity, number of users, traffic
statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis
can incorporate various front-end MIMO capability assumptions -- a critical
feature of mmWave. Under realistic system and traffic assumptions, the analysis
reveals that the proposed flexible frame structure design offers significant
benefits over designs with fixed frame structures similar to current 4G
long-term evolution (LTE). It is also shown that fully digital beamforming
architectures offer significantly lower overhead compared to analog and hybrid
beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication
- …