Pitfall of the Detection Rate Optimized Bit Allocation within template protection and a remedy

One of the requirements of a biometric template protection system is that the protected template ideally should not leak any information about the biometric sample or its derivatives. In the literature, several proposed template protection techniques are based on binary vectors. Hence, they require the extraction of a binary representation from the real- valued biometric sample. In this work we focus on the Detection Rate Optimized Bit Allocation (DROBA) quantization scheme that extracts multiple bits per feature component while maximizing the overall detection rate. The allocation strategy has to be stored as auxiliary data for reuse in the verification phase and is considered as public. This implies that the auxiliary data should not leak any information about the extracted binary representation. Experiments in our work show that the original DROBA algorithm, as known in the literature, creates auxiliary data that leaks a significant amount of information. We show how an adversary is able to exploit this information and significantly increase its success rate on obtaining a false accept. Fortunately, the information leakage can be mitigated by restricting the allocation freedom of the DROBA algorithm. We propose a method based on population statistics and empirically illustrate its effectiveness. All the experiments are based on the MCYT fingerprint database using two different texture based feature extraction algorithms

Fingerprint template protection using minutia-pair spectral representations

Storage of biometric data requires some form of template protection in order to preserve the privacy of people enrolled in a biometric database. One approach is to use a Helper Data System. Here it is necessary to transform the raw biometric measurement into a fixed-length representation. In this paper we extend the spectral function approach of Stanko and Skoric [WIFS2017], which provides such a fixed-length representation for fingerprints. First, we introduce a new spectral function that captures different information from the minutia orientations. It is complementary to the original spectral function, and we use both of them to extract information from a fingerprint image. Second, we construct a helper data system consisting of zero-leakage quantisation followed by the Code Offset Method. We show empirical data which demonstrates that applying our helper data system causes only a small performance penalty compared to fingerprint authentication based on the unprotected spectral functions

Multi-bits biometric string generation based on the likelyhood ratio

Preserving the privacy of biometric information stored in biometric systems is becoming a key issue. An important element in privacy protecting biometric systems is the quantizer which transforms a normal biometric template into a binary string. In this paper, we present a user-specific quantization method based on a likelihood ratio approach (LQ). The bits generated from every feature are concatenated to form a fixed length binary string that can be hashed to protect its privacy. Experiments are carried out on both fingerprint data (FVC2000) and face data (FRGC). Results show that our proposed quantization method achieves a reasonably good performance in terms of FAR/FRR (when FAR is 10−4, the corresponding FRR are 16.7% and 5.77% for FVC2000 and FRGC, respectively)

On the performance of helper data template protection schemes

The use of biometrics looks promising as it is already being applied in elec- tronic passports, ePassports, on a global scale. Because the biometric data has to be stored as a reference template on either a central or personal storage de- vice, its wide-spread use introduces new security and privacy risks such as (i) identity fraud, (ii) cross-matching, (iii) irrevocability and (iv) leaking sensitive medical information. Mitigating these risks is essential to obtain the accep- tance from the subjects of the biometric systems and therefore facilitating the successful implementation on a large-scale basis. A solution to mitigate these risks is to use template protection techniques. The required protection properties of the stored reference template according to ISO guidelines are (i) irreversibility, (ii) renewability and (iii) unlinkability. A known template protection scheme is the helper data system (HDS). The fun- damental principle of the HDS is to bind a key with the biometric sample with use of helper data and cryptography, as such that the key can be reproduced or released given another biometric sample of the same subject. The identity check is then performed in a secure way by comparing the hash of the key. Hence, the size of the key determines the amount of protection. This thesis extensively investigates the HDS system, namely (i) the the- oretical classication performance, (ii) the maximum key size, (iii) the irre- versibility and unlinkability properties, and (iv) the optimal multi-sample and multi-algorithm fusion method. The theoretical classication performance of the biometric system is deter- mined by assuming that the features extracted from the biometric sample are Gaussian distributed. With this assumption we investigate the in uence of the bit extraction scheme on the classication performance. With use of the the- oretical framework, the maximum size of the key is determined by assuming the error-correcting code to operate on Shannon's bound. We also show three vulnerabilities of HDS that aect the irreversibility and unlinkability property and propose solutions. Finally, we study the optimal level of applying multi- sample and multi-algorithm fusion with the HDS at either feature-, score-, or decision-level

MEMS sensors as physical unclonable functions

A fundamental requirement of any crypto system is that secret-key material remains securely stored so that it is robust in withstanding attacks including physical tampering. In this context, physical unclonable functions (PUFs) have been proposed to store cryptographic secrets in a particularly secure manner. In this thesis, the feasibility of using microelectromechanical systems (MEMS) sensors for secure key storage purposes is evaluated for the first time. To this end, we investigated an off-the-shelf 3-axis MEMS gyroscope design and used its properties to derive a unique fingerprint from each sensor. We thoroughly examined the robustness of the derived fingerprints against temperature variation and aging. We extracted stable keys with nearly full entropy from the fingerprints. The security level of the extracted keys lies in a range between 27 bits and 150 bits depending on the applied test conditions and the used entropy estimation method. Moreover, we provide experimental evidence that the extractable key length is higher in practice when multiple wafers are considered. In addition, it is shown that further improvements could be achieved by using more precise measurement techniques and by optimizing the MEMS design. The robustness of a MEMS PUF against tampering and malicious read-outs was tested by three different types of physical attacks. We could show that MEMS PUFs provide a high level of protection due to the sensitivity of their characteristics to disassembly.Eine grundlegende Anforderung jedes Kryptosystems ist, dass der verwendete geheime Schlüssel sicher und geschützt aufbewahrt wird. Vor diesem Hintergrund wurden physikalisch unklonbare Funktionen (PUFs) vorgeschlagen, um kryptographische Geheimnisse besonders sicher zu speichern. In dieser Arbeit wird erstmals die Verwendbarkeit von mikroelektromechanischen Systemen (MEMS) für die sichere Schlüsselspeicherung anhand eines 3-achsigen MEMS Drehratensensor gezeigt. Dabei werden die Eigenschaften der Sensoren zur Ableitung eines eindeutigen Fingerabdrucks verwendet. Die Temperatur- und Langzeitstabilität der abgeleiteten Fingerabdrücke wurde ausführlich untersucht. Aus den Fingerabdrücken wurden stabile Schlüssel mit einem Sicherheitsniveau zwischen 27 Bit und 150 Bit, abhängig von den Testbedingungen und der verwendeten Entropie-Schätzmethode, extrahiert. Außerdem konnte gezeigt werden, dass die Schlüssellänge ansteigt, je mehr Wafer betrachtet werden. Darüber hinaus wurde die Verwendung einer präziseren Messtechnik und eine Optimierung des MEMS-Designs als potentielle Verbesserungsmaßnahmen identifiziert. Die Robustheit einer MEMS PUF gegen Manipulationen und feindseliges Auslesen durch verschiedene Arten von physikalischen Angriffen wurde untersucht. Es konnte gezeigt werden, dass MEMS PUFs aufgrund der Empfindlichkeit ihrer Eigenschaften hinsichtlich einer Öffnung des Mold-Gehäuses eine hohe Widerstandsfähigkeit gegenüber invasiven Angriffen aufweisen