Integrated Access and Backhaul for 5G and Beyond (6G)

Enabling network densification to support coverage-limited millimeter wave (mmWave) frequencies is one of the main requirements for 5G and beyond. It is challenging to connect a high number of base stations (BSs) to the core network via a transport network. Although fiber provides high-rate reliable backhaul links, it requires a noteworthy investment for trenching and installation, and could also take a considerable deployment time. Wireless backhaul, on the other hand, enables fast installation and flexibility, at the cost of data rate and sensitivity to environmental effects. For these reasons, fiber and wireless backhaul have been the dominant backhaul technologies for decades. Integrated access and backhaul (IAB), where along with celluar access services a part of the spectrum available is used to backhaul, is a promising wireless solution for backhauling in 5G and beyond. To this end, in this thesis we evaluate, analyze and optimize IAB networks from various perspectives. Specifically, we analyze IAB networks and develop effective algorithms to improve service coverage probability. In contrast to fiber-connected setups, an IAB network may be affected by, e.g., blockage, tree foliage, and rain loss. Thus, a variety of aspects such as the effects of tree foliage, rain loss, and blocking are evaluated and the network performance when part of the network being non-IAB backhauled is analysed. Furthermore, we evaluate the effect of deployment optimization on the performance of IAB networks.First, in Paper A, we introduce and analyze IAB as an enabler for network densification. Then, we study the IAB network from different aspects of mmWave-based communications: We study the network performance for both urban and rural areas considering the impacts of blockage, tree foliage, and rain. Furthermore, performance comparisons are made between IAB and networks of which all or part of small BSs are fiber-connected. Following the analysis, it is observed that IAB may be a good backhauling solution with high flexibility and low time-to-market. The second part of the thesis focuses on improving the service coverage probability by carrying out topology optimization in IAB networks focusing on mmWave communication for different parameters, such as blockage, tree foliage, and antenna gain. In Paper B, we study topology optimization and routing in IAB networks in different perspectives. Thereby, we design efficient Genetic algorithm (GA)-based methods for IAB node distribution and non-IAB backhaul link placement. Furthermore, we study the effect of routing in the cases with temporal blockages. Finally, we briefly study the recent standardization developments, i.e., 3GPP Rel-16 as well as the\ua0Rel-17 discussions on routing. As the results show, with a proper planning on network deployment, IAB is an attractive solution to densify the networks for 5G and beyond. Finally, we focus on improving the performance of IAB networks with constrained deployment optimization. In Paper C, we consider various IAB network models while presenting different algorithms for constrained deployment optimization. Here, the constraints are coming from either inter-IAB distance limitations or geographical restrictions. As we show, proper network planning can considerably improve service coverage probability of IAB networks with deployment constraints

A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future

A High Altitude Platform Station (HAPS) is a network node that operates in the stratosphere at an of altitude around 20 km and is instrumental for providing communication services. Precipitated by technological innovations in the areas of autonomous avionics, array antennas, solar panel efficiency levels, and battery energy densities, and fueled by flourishing industry ecosystems, the HAPS has emerged as an indispensable component of next-generations of wireless networks. In this article, we provide a vision and framework for the HAPS networks of the future supported by a comprehensive and state-of-the-art literature review. We highlight the unrealized potential of HAPS systems and elaborate on their unique ability to serve metropolitan areas. The latest advancements and promising technologies in the HAPS energy and payload systems are discussed. The integration of the emerging Reconfigurable Smart Surface (RSS) technology in the communications payload of HAPS systems for providing a cost-effective deployment is proposed. A detailed overview of the radio resource management in HAPS systems is presented along with synergistic physical layer techniques, including Faster-Than-Nyquist (FTN) signaling. Numerous aspects of handoff management in HAPS systems are described. The notable contributions of Artificial Intelligence (AI) in HAPS, including machine learning in the design, topology management, handoff, and resource allocation aspects are emphasized. The extensive overview of the literature we provide is crucial for substantiating our vision that depicts the expected deployment opportunities and challenges in the next 10 years (next-generation networks), as well as in the subsequent 10 years (next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial

A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives

The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain

MM-Wave HetNet in 5G and beyond Cellular Networks Reinforcement Learning Method to improve QoS and Exploiting Path Loss Model

This paper presents High density heterogeneous networks (HetNet) which are the most promising technology for the fifth generation (5G) cellular network. Since 5G will be available for a long time, previous generation networking systems will need customization and updates. We examine the merits and drawbacks of legacy and Q-Learning (QL)-based adaptive resource allocation systems. Furthermore, various comparisons between methods and schemes are made for the purpose of evaluating the solutions for future generation. Microwave macro cells are used to enable extra high capacity such as Long-Term Evolution (LTE), eNodeB (eNB), and Multimedia Communications Wireless technology (MC), in which they are most likely to be deployed. This paper also presents four scenarios for 5G mm-Wave implementation, including proposed system architectures. The WL algorithm allocates optimal power to the small cell base station (SBS) to satisfy the minimum necessary capacity of macro cell user equipment (MUEs) and small cell user equipment (SCUEs) in order to provide quality of service (QoS) (SUEs). The challenges with dense HetNet and the massive backhaul traffic they generate are discussed in this study. Finally, a core HetNet design based on clusters is aimed at reducing backhaul traffic. According to our findings, MM-wave HetNet and MEC can be useful in a wide range of applications, including ultra-high data rate and low latency communications in 5G and beyond. We also used the channel model simulator to examine the directional power delay profile with received signal power, path loss, and path loss exponent (PLE) for both LOS and NLOS using uniform linear array (ULA) 2X2 and 64x16 antenna configurations at 38 GHz and 73 GHz mmWave bands for both LOS and NLOS (NYUSIM). The simulation results show the performance of several path loss models in the mmWave and sub-6 GHz bands. The path loss in the close-in (CI) model at mmWave bands is higher than that of open space and two ray path loss models because it considers all shadowing and reflection effects between transmitter and receiver. We also compared the suggested method to existing models like Amiri, Su, Alsobhi, Iqbal, and greedy (non adaptive), and found that it not only enhanced MUE and SUE minimum capacities and reduced BT complexity, but it also established a new minimum QoS threshold. We also talked about 6G researches in the future. When compared to utilizing the dual slope route loss model alone in a hybrid heterogeneous network, our simulation findings show that decoupling is more visible when employing the dual slope path loss model, which enhances system performance in terms of coverage and data rate