63 research outputs found
Research on energy-efficient VLSI decoder for LDPC code
制度:新 ; 報告番号:甲3742号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6113Waseda Universit
Design Trade‐Offs for FPGA Implementation of LDPC Decoders
Low density parity check (LDPC) decoders represent important throughput bottlenecks, as well as major cost and power-consuming components in today\u27s digital circuits for wireless communication and storage. They present a wide range of architectural choices, with different throughput, cost, and error correction capability trade-offs. In this book chapter, we will present an overview of the main design options in the architecture and implementation of these circuits on field programmable gate array (FPGA) devices. We will present the mapping of the main units within the LDPC decoders on the specific embedded components of FPGA device. We will review architectural trade-offs for both flooded and layered scheduling strategies in their FPGA implementation
Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder
As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor
Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder
As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor
Recommended from our members
Low-complexity high-speed VLSI design of low-density parity-check decoders
Low-Density Parity-check (LDPC) codes have attracted considerable attention due to their capacity approaching performance over AWGN channel and highly parallelizable decoding schemes. They have been considered in a variety of industry standards for the next generation communication systems. In general, LDPC codes achieve outstanding performance with large codeword lengths (e.g., N>1000 bits), which lead to a linear increase of the size of memory for storing all the soft messages in LDPC decoding. In the next generation communication systems, the target data rates range from a few hundred Mbit/sec to several Gbit/sec. To achieve those very high decoding throughput, a large amount of computation units are required, which will significantly increase the hardware cost and power consumption of LDPC decoders. LDPC codes are decoded using iterative decoding algorithms. The decoding latency and power consumption are linearly proportional to the number of decoding iterations. A decoding approach with fast convergence speed is highly desired in practice.
This thesis considers various VLSI design issues of LDPC decoder and develops efficient approaches for reducing memory requirement, low complexity implementation, and high speed decoding of LDPC codes. We propose a memory efficient partially parallel decoder architecture suited for quasi-cyclic LDPC (QC-LDPC) codes using Min-Sum decoding algorithm. We develop an efficient architecture for general permutation matrix based LDPC codes. We have explored various approaches to linearly increase the decoding throughput with a small amount of hardware overhead. We develop a multi-Gbit/sec LDPC decoder architecture for QC-LDPC codes and prototype an enhanced partially parallel decoder architecture for a Euclidian geometry based LDPC code on FPGA. We propose an early stopping scheme and an extended layered decoding method to reduce the number of decoding iterations for undecodable and decodable sequence received from channel. We also propose a low-complexity optimized 2-bit decoding approach which requires comparable implementation complexity to weighted bit flipping based algorithms but has much better decoding performance and faster convergence speed
Hardware Implementations of CCSDS Deep Space LDPC Codes for a Satellite Transponder
Error-correction coding is a technique that adds mathematical structure to a message, allowing corruptions to be detected and corrected when the message is received. This is especially important for deep space satellite communications, since the long distances and low signal power levels often cause message corruption. A very strong type of error-correction coding known as LDPC codes was recently standardized for use with space communications. This project implements the encoding and decoding algorithms required for a small satellite radio to be able to use these LDPC codes. Several decoder architectures are implemented and compared by their performance, speed, and complexity. Using these LDPC decoders requires knowledge of the received signal and noise levels, so an appropriate algorithm for estimating these parameters is developed and implemented. The LDPC encoder is implemented using a flexible architecture that allows the entire standardized family of ten LDPC codes to be encoded using the same hardware
- …