154,426 research outputs found
All-optical combiner-splitter and gating devices based on straight waveguides
A two-mode optical combiner-splitter device is designed based on all straight waveguides that maintains the integrity of the two modes during propagation and allows for an analytic analysis. The design analysis has the potential to improve the precision of the device fabrication. The design is used in an analytic optical gate based on a nonlinear Mach-Zehnder interferometer. The design reduces the size of a previously proposed device and simplifies its analysis
Soft lithography replication of polymeric microring optical resonators
We have developed a soft lithography method to replicate polymeric integrated optical devices. In this method, the master device and the molded replica are made of the same materials, allowing direct comparison. To evaluate the quality of the replication, microring optical resonators are chosen as test devices because of their sensitivity to small fabrication errors. The master devices are precisely fabricated using direct electron beam lithography. The replicas are produced by the molding technique and subsequent ultraviolet curing. Compared with the master devices, the molded devices show minimal change in both physical shape and optical performance. This correspondence indicates the merits of soft lithographic methods for fabrication of precision integrated optical devices
Tuning a racetrack ring resonator by an integrated dielectric MEMS cantilever
The principle, fabrication and characterization of a dielectric MEMS cantilever located a few 100 nm above a racetrack ring resonator are presented. After fabrication of the resonators on silicon-on-insulator (SOI) wafers in a foundry process, the cantilevers were integrated by surface micromachining techniques. Off-state deflections of the cantilevers have been optimized to appropriately position them near the evanescent field of the resonator. Using electrostatic actuation, moving the cantilevers into this evanescent field, the propagation properties of the ring waveguide are modulated. We demonstrate 122 pm tuning of the resonance wavelength of the optical ring resonator (in the optical C-band) without change of the optical quality factor, on application of 9 V to a 40 µm long cantilever. This compact integrated device can be used for tuning/switching a specific wavelength, with very little energy for operation and negligible cross talk with surrounding device
Fabrication and optimisation of a fused filament 3D-printed microfluidic platform
A 3D-printed microfluidic device was designed and manufactured using a low cost
($2000)
consumer grade fusion deposition modelling (FDM) 3D printer. FDM printers are not typically
used, or are capable, of producing the fine detailed structures required for microfluidic
fabrication. However, in this work, the optical transparency of the device was improved
through manufacture optimisation to such a point that optical colorimetric assays can be
performed in a 50 µl device. A colorimetric enzymatic cascade assay was optimised using
glucose oxidase and horseradish peroxidase for the oxidative coupling of aminoantipyrine
and chromotropic acid to produce a blue quinoneimine dye with a broad absorbance peaking
at 590 nm for the quantification of glucose in solution. For comparison the assay was run in
standard 96 well plates with a commercial plate reader. The results show the accurate and
reproducible quantification of
0–10 mM glucose solution using a 3D-printed microfluidic
optical device with performance comparable to that of a plate reader assay
Passive mode-locked lasing by injecting a carbon nanotube-solution in the core of an optical fiber
In this paper, we propose a saturable absorber (SA) device consisting on an in-fiber micro-slot inscribed by femtosecond laser micro fabrication, filled by a dispersion of Carbon Nanotubes (CNT). Due to the flexibility of the fabrication method, efficient and simple integration of the mode-locking device directly into the optical fiber is achieved. Furthermore, the fabrication process offers a high level of control over the dimensions and location of the micro-slots. We apply this fabrication flexibility to extend the interaction length between the CNT and the propagating optical field along the optical fiber, hence enhancing the nonlinearity of the device. Furthermore, the method allows the fabrication of devices that operate by either a direct field interaction (when the central peak of the propagating optical mode passes through the nonlinear media) or an evanescent field interaction (only a fraction of the optical mode interacts with the CNT). In this paper, several devices with different interaction lengths and interaction regimes are investigated. Self-starting passively modelocked laser operation with an enhanced nonlinear interaction is observed using CNT-based SAs in both interaction regimes. This method constitutes a simple and suitable approach to integrate the CNT into the optical system as well as enhancing the optical nonlinearity of CNT-based photonic devices
- …