Physical Layer Service Integration in 5G: Potentials and Challenges

High transmission rate and secure communication have been identified as the key targets that need to be effectively addressed by fifth generation (5G) wireless systems. In this context, the concept of physical-layer security becomes attractive, as it can establish perfect security using only the characteristics of wireless medium. Nonetheless, to further increase the spectral efficiency, an emerging concept, termed physical-layer service integration (PHY-SI), has been recognized as an effective means. Its basic idea is to combine multiple coexisting services, i.e., multicast/broadcast service and confidential service, into one integral service for one-time transmission at the transmitter side. This article first provides a tutorial on typical PHY-SI models. Furthermore, we propose some state-of-the-art solutions to improve the overall performance of PHY-SI in certain important communication scenarios. In particular, we highlight the extension of several concepts borrowed from conventional single-service communications, such as artificial noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These techniques are shown to be effective in the design of reliable and robust PHY-SI schemes. Finally, several potential research directions are identified for future work.Comment: 12 pages, 7 figure

Outage Constrained Robust Secure Transmission for MISO Wiretap Channels

In this paper we consider the robust secure beamformer design for MISO wiretap channels. Assume that the eavesdroppers' channels are only partially available at the transmitter, we seek to maximize the secrecy rate under the transmit power and secrecy rate outage probability constraint. The outage probability constraint requires that the secrecy rate exceeds certain threshold with high probability. Therefore including such constraint in the design naturally ensures the desired robustness. Unfortunately, the presence of the probabilistic constraints makes the problem non-convex and hence difficult to solve. In this paper, we investigate the outage probability constrained secrecy rate maximization problem using a novel two-step approach. Under a wide range of uncertainty models, our developed algorithms can obtain high-quality solutions, sometimes even exact global solutions, for the robust secure beamformer design problem. Simulation results are presented to verify the effectiveness and robustness of the proposed algorithms

Artificial Noise-Aided Biobjective Transmitter Optimization for Service Integration in Multi-User MIMO Gaussian Broadcast Channel

This paper considers an artificial noise (AN)-aided transmit design for multi-user MIMO systems with integrated services. Specifically, two sorts of service messages are combined and served simultaneously: one multicast message intended for all receivers and one confidential message intended for only one receiver and required to be perfectly secure from other unauthorized receivers. Our interest lies in the joint design of input covariances of the multicast message, confidential message and artificial noise (AN), such that the achievable secrecy rate and multicast rate are simultaneously maximized. This problem is identified as a secrecy rate region maximization (SRRM) problem in the context of physical-layer service integration. Since this bi-objective optimization problem is inherently complex to solve, we put forward two different scalarization methods to convert it into a scalar optimization problem. First, we propose to prefix the multicast rate as a constant, and accordingly, the primal biobjective problem is converted into a secrecy rate maximization (SRM) problem with quality of multicast service (QoMS) constraint. By varying the constant, we can obtain different Pareto optimal points. The resulting SRM problem can be iteratively solved via a provably convergent difference-of-concave (DC) algorithm. In the second method, we aim to maximize the weighted sum of the secrecy rate and the multicast rate. Through varying the weighted vector, one can also obtain different Pareto optimal points. We show that this weighted sum rate maximization (WSRM) problem can be recast into a primal decomposable form, which is amenable to alternating optimization (AO). Then we compare these two scalarization methods in terms of their overall performance and computational complexity via theoretical analysis as well as numerical simulation, based on which new insights can be drawn.Comment: 14 pages, 5 figure

Beamforming and non-orthogonal multiple access for rate and secrecy enhancement of fifth generation communication system

The fifth-generation (5G) communication systems have many anticipated functionalities and requirements such as high data rate, massive connectivity, wide coverage area, low latency and enhanced secrecy performance. In order to meet these criteria, communication schemes that combine 5G key enabling technologies need to be investigated. In this thesis, a novel communication system that merges non-orthogonal multiple access (NOMA), energy harvesting, beamforming, and full-duplex (FD) techniques in order to enhance both capacity and secrecy of 5G system is introduced. In the capacity improving scheme, NOMA is first combined with beamforming to serve more than one user in each beamforming vector. Next, simultaneous wireless information and power transfer (SWIPT) technique is exploited to encourage the strong user (user with better channel condition) to relay the information messages of the weak user (user with poor channel condition) in FD manner. The total sum rate maximisation problem is formulated and solved by means of convex-concave procedure. The system performance is also analysed by deriving the outage probability of both users. Additionally, the model is extended to a more general case wherein the users are moving, and the outage probability of this dynamic topology is provided by means of the stochastic geometry framework. Novel secure schemes are also introduced to safeguard legitimate users’ information from internal and external eavesdroppers. In the internal eavesdropper’s case, artificial signal concept is adopted to protect NOMA’s weak user’s information from being intercepted by the strong user. The secrecy outage probability of theweak user is derived and validated. In addition, game theory discipline is exploited to provide an efficient eavesdropping avoidance algorithm. Null-steering beamforming is adopted in the external eavesdropper’s case in two different schemes namely self and nonself-cooperative jamming. In self-cooperative strategy, the base station applies the null-steering jamming to impair the eavesdropper channel, while sending the information-bearing signals to the intended legitimate users. Whereas in the nonself-cooperative jamming scheme, the base station provides the helpers with the required information and power by means of SWIPT technique in the first phase. The helpers deploy null-steering beamforming to jam the eavesdropper during the information exchange between the base station and the intended users in the second phase. The secrecy outage probability of the legitimate users is derived in both jamming schemes. Game theory is also introduced to the nonself-cooperative jamming scheme for further improvements on the secrecy outage behaviour and the economic revenue of the system. The proposed capacity enhancing scheme demonstrates about 200% higher sum rate when compared with the non-cooperative and half-duplex cooperative NOMA systems. In addition, the novel secure scheme in the internal eavesdropper case is proven to enhance the information security of the weak user without compromising the functionalities of the strong user or NOMA superiority over orthogonal multiple access systems. Null-steering based jamming system also illustrates improved secrecy performance in the external eavesdropper case when compared to the conventional jamming schemes. Numerical simulations are carried out in order to validate the derived closed-form expressions and to illustrate the performance enhancement achieved by the proposed schemes where the rate is increased by 200% and the secrecy outage probability is decreased by 33% when compared to the baseline systems

Determination of optically stimulated luminescence dosimetric characteristics and suitability for entrance surface dose assessement in diagnostic x-ray examinations

The availability of Optically Stimulated Luminescence (OSL) dosimeter system developed by Landauer Inc. (Glenwood IL) has greatly improved radiation dosimetry application in the medical field. Recent studies with OSL dosimeters (nanoDots) gave much emphases to patient radiation exposure in radiotherapy but ignoring the potential risks from radiographic examinations. This study focused on the measurement of entrance surface dose (ESD) resulting from radiographic examination. Monitoring procedures have been developed by the International Atomic Energy Agency (IAEA) to estimate ESD, while considering exposure parameters and patient’s characteristics. However, dosimetric properties of the OSL system must be characterized to ascertain its suitability for ESD measurements in medical radiography due to energy dependence and over-response factors of the Al2O3 material. This thesis consists of three phases: 1) evaluating stability of the new OSL dosimetry system, 2) characterizing the nanoDots in radiographic energy range from 40 kV to 150 kV with typical doses ranging from 0 to 20 mGy, and 3) assessing suitability of the nanoDots for ESD measurement in routine X-ray examinations. The dosimetric characteristics of the nanoDots in the above energy range are presented in this study, including repeatability, reproducibility, signal depletion, element correction factor, linearity, angular and energy dependence, and dose measurement accuracy. Experimental results showed repeatability of below 5% and reproducibility of less than 2%. OSL signals after sequential readouts were reduced by approximately 0.5% per readout and having good linearity for doses between 5 – 20 mGy. The nanoDots OSL dosimeter showed significant angular and energy dependence in this energy range, and corresponding energy correction factors were determined in the range of 0.76 – 1.12. ESDs were determined in common diagnostic X-ray examinations using three different methods including direct (measured on phantom/patient) and indirect (without phantom) measurements with nanoDots OSL dosimeters, and CALDose_X 5.0 software calculations. Results from direct and indirect ESD measurements showed good agreement within relative uncertainties of 5.9% and 12%, respectively, in accordance with the International Electrotechnical Commission (IEC) 61674 specifications. However, the measured results were below ESDs calculated with CALDose_X 5.0 software. Measured eye and gonad doses were found to be significant compared to ESDs during anterior-posterior (AP) abdomen and AP skull examinations, respectively. The results obtained in this research work indicate the suitability of utilizing nanoDots OSL dosimeter for entrance surface dose assessment during diagnostic X-ray examinations

Transmission Design for Reconfigurable Intelligent Surface-Aided Wireless Systems

The performance benefits promised by Reconfigurable Intelligent Surface (RIS) are strongly dependent on the availability of highly accurate and up-to-date Channel State Information (CSI), which, however, is challenging to obtain. This thesis proposes efficient transceiver designs for a variety of CSI challenges such as worst channel condition in multicast systems, channel uncertainties caused by the presence of random blockages in millimeter wave systems, by the channel estimation error in downlink systems and by the presence of eavesdropper in security systems. First, a low-complexity transceiver design scheme in the multicast systems is proposed. In order to ensure the quality of service of the user with the worst channel condition, this thesis deploys an RIS to enhance signal coverage, and proposes two novel and efficient algorithms to jointly design the Base Station (BS) and RIS beamformings. The low-complexity algorithm with closed-form solutions is proved to have the same performance as the general second-order cone programming based algorithm. Second, novel fairness-oriented robust transceiver design schemes are proposed in RIS-aided millimeter wave systems. The channel uncertainty caused by the random blockages is analyzed, and the metric of maximum outage probability minimization is proposed. To address this problem, stochastic optimization techniques are adopted and closed-form solutions of the BS and RIS beamformings are then obtained. The proposed stochastic optimization algorithms are proved to converge to the set of stationary points. Third, a framework of robust transceiver design scheme is proposed to address the channel uncertainty caused by the cascaded BS-RIS-user channel estimation error. Two cascaded channel error models are analyzed, and the correspondingly two robust beamforming design problems are proposed. The optimization theory is used to address the complex non-convex optimization problems. The numerical results show that the proposed robust scheme can effectively resist channel uncertainty. Finally, robust transceiver design schemes are proposed in RIS-aided physical layer security systems. The schemes analyze the channel uncertainties caused by the eavesdropper who launches an active attack, and by the eavesdropper conducting passive eavesdropping. Numerical results show that the negative effect of the eavesdropper’s channel error is larger than that of the legitimate user